T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring

• Availability of Local Installer for Draw-Tite Trailer Hitch Receiver on 2012 Jeep Grand Cherokee
  We can help with a local installer for the # DT38MR on your 2012 Jeep Grand Cherokee Laredo. I have attached a link below which will take you to a list of professional installers near Columbia, SC. You can change the zip code if yours is different. If you plan on doing some towing with your Jeep you will also need wiring. If you do not have the tow package you need the # 118425 and if you do have the tow package the # 118384. The wiring harness will provide you with a 4-way to power your...
  view full answer...
• Recommended Wiring Harness For 2020 Dodge Durango Without Factory Tow Package
  There is a 4-pole wiring harness available for the 2020 Dodge Durango without factory tow package but the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118384 is for vehicle's with the tow package. I recommend to use the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118617 which plugs in behind the vehicle's taillights. This will give you a 4-pole flat at the rear of the Durango. I have attached a video for your reference. The hitch I...
  view full answer...
• Recommended Trailer Hitch For Ram 1500 With Factory Installed Crossmember
  The Draw Tite hitch part # 41948 is a confirmed fit for the 2017 Ram 1500. You will need to remove the factory hitch and install the Draw-Tite hitch. The maximum tongue weight is up to 1,500 lbs and the maximum gross trailer weight is up to 12,000 lbs. Another option is to use Draw-Tite Max-Frame Trailer Hitch Receiver # 75662. This receiver easily bolts on to your frame and does not require you to remove the factory crossmember. The maximum tongue weight is up to 600 lbs and the maximum...
  view full answer...
• How to Hook Up a Factory Mopar Harness on a 2020 Grand Cherokee Without the Factory Tow Package
  As your 2020 Jeep Grand Cherokee did not come with the factory towing package, there will need to be some hardwiring that will need to be done. But don't panic, it is not as difficult as it will sound. I also have videos included that will significantly assist in the process. You will need to start with a 4 Flat harness, like the Tekonsha # 118727. This will get power to the trailer lights, but to get the 7 Way working, you will need our Universal Installation Kit for Trailer Brake Controllers...
  view full answer...
• Towing Capacity and Parts Needed to Tow With 2017 Dodge Durango AWD With 5.7L Engine
  According to the owner's manual I looked up online, your 2017 Dodge Durango AWD with a 5.7L engine has a towing capacity of 7,200 lbs, so long as it has the factory tow package; if it does not then the towing capacity is 3,500 lbs. You'll want to keep in mind there is no way to increase the towing capacity of a vehicle as it is set by the manufacturer to ensure safety. For the hitch I recommend the Draw-Tite Trailer Hitch Receiver # 75713. For trailer wiring, you will need T-One Vehicle...
  view full answer...
• 4-Way Trailer Wiring Harness For 2015 GMC Sierra 1500 Base
  Yes, to power trailer lights with your 2015 GMC Sierra 1500 you will need a 4-way flat trailer connector, and your Sierra should have a round plug under the truck and behind the bumper like you see in the accompanying photo (though it won't be hanging down exactly like that). Assuming you do have that plug, you can use a simple plug-in connector, which is the following part number: - T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118384 And to prevent corrosion on the...
  view full answer...
  
• Does T-One Vehicle Wiring Harness 118384 have Combined Brake Light and Turn Signal Functions
  Tow package wiring on a vehicle is already converted to combine the brake and turn signal lights onto the same circuit which is what trailers use. Wiring harness # 118384 Tees in line with the factory 7-Way wiring and provides a 4-Way flat connector in addition to the factory 7-Way so when using it the brake and turn signal lights will also be on the same circuits.
  view full answer...
• No Running Light On My Trailer When Connected To My 2011 Ram Sport
  Under the hood of your 2011 Dodge Ram there should be a 20 amp fuse for the trailer running lights. It is a fairly common problem with your generation of truck that fuse ends up blowing. There should be a legend on the fuse box or you can find it in your owners manual that details where all the different fuses are. Use that to find the correct fuse and replace it.
  view full answer...
• Part Needed to Add Second 4-Way to Rear of 2016 Ford F-150
  What you could use is the part # 118384. This 4-way will plug in line with the 7-way you have at the rear of your 2016 Ford F-150 and it will provide you with an additional 4-way at the rear of your truck.
  view full answer...
• How to Add a 4-Way to a 2008 Dodge Ram with 7-Way at the Rear of Vehicle
  The great thing about the ZCI trailer wiring harness part # 119250KIT is that it can be installed on basically any vehicle with taillights and it requires not splicing. Now that being said, if your truck has two 7-ways and you are looking for a way to also have a 4-way installed I have a better solution that would be much easier. For that you would want the part # 118384 which will give you a 4-way by plugging in line with the 7-way at the rear of your truck. I attached an install video...
  view full answer...
• How To Add a 4-Way to a 2019 GMC Sierra 3500 To Use with Tailgate Light Bar
  In order to add a 4-way trailer connector while also retaining the 7-way trailer connector on a 2019 GMC Sierra 3500 you can use the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118384 which offers plug-n-play installation. This will then allow you to plug in a tailgate light bar like the Putco Red Blade LED Tailgate Light Bar part # P92010-60 and still tow a trailer if needed.
  view full answer...
• Installation of Draw-Tite Trailer Hitch # 75578 On A 2009 Jeep Liberty
  On your 2009 Jeep Liberty, the Draw-Tite Trailer Hitch # 75578 is a compatible fit and will extend past the rear fascia of your vehicle as shown in the graphic I have provided. The measurement from the center of the hitch pin hold to the outer edge of the bumper is approximately 2-1/2 inches. Regarding the trimming of your bumper, there is no trimming necessary while installing this hitch on your vehicle. I have provided links to the installation instructions for this product as well as...
  view full answer...
  
• How to Wire in Dual 4-pole Vehicle-Side Trailer Connectors on RV
  There are several ways to have dual 4-pole flat vehicle wiring on your RV, depending on how the RV wiring is set up. If the RV uses a round U.S. Car connector at the back of its 7-way you could use two of part # 118384 in a daisy-chain set up. This would provide two 4-poles and keep your 7-way active. This is a plug-and-play option. If you don't mind a bit of cutting and splicing you could tap into the wiring that leads to the RV 7-way and splice in two of an item like # HM48030 using...
  view full answer...
• Trailer Running Light Fuse Location 2016 Ram 3500
  I pulled up a copy of your owners manual online and it looks like F29 is the fuse slot you are looking for for the trailer running lights circuit. This will be a blue 20 amp cartridge fuse.
  view full answer...
• Trailer Wiring Harness for a 2001 Chevrolet Tahoe with LED Tail Lights
  It sounds like you are trying to install a trailer wiring harness on your 2001 Chevrolet Tahoe with aftermarket LED tail lights. If that is the case then you can use the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector part # C59236 which is compatible with LED tail lights. This is a hard wire option that will require you to splice into the tail light circuits on your Tahoe. However, if you do not already have a US car connector plug (see photo) on your Tahoe then this...
  view full answer...
  
• 7-Way Trailer Connector Recommended for 2016 Chevy Traverse
  I'd be happy to help you with that. Even though you don't have the 'factory tow package', your vehicle is already prewired for a 7-way and a brake controller, if you need one. For the 7-way, you can use part # 118271 that will plug into the connector under the bumper. The kit includes the fuses and relays needed to activate the tow package. For a 4 pin connector, you can either use an adapter like # PK12716, or you can use a t-connector like # 118384 that would plug into the connection...
  view full answer...
• Troubleshooting Loss of Power on Jack and Interior Trailer Lights with 2017 Ram
  It sounds like there is likely an issue with the 12V power circuit on your Ram's 7-Way connector, whether your jack and interior lights are powered directly from the 7-Way or via a battery on the trailer that is using the truck's 7-Way 12V power to maintain its charge. What you will want to do first is test the 12V pin on the truck's 7-Way with a circuit tester like # 40376 to see if you are getting power there. The 12V pin should be located at the 1 o'clock position on the 7-Way. If...
  view full answer...
• 2012 Ram 3500 Trailer Brake and Running Lights Not Working Troubleshooting
  The trailer wiring circuits on the newer Dodge trucks have some interesting issues. Instead of a standard fuse for these circuits they are protected by the TIPM which when trips can only be reset by a Dodge dealer and can only be reset so many times before an expensive replacement. The easiest way to deal with them is to bypass the factory trailer wiring. To do this with a 7-way like you said you have on your truck you will first need to start with a 4-way. For that you will need the...
  view full answer...
• Draw-Tite Trailer Hitch Receiver with Installation Hardware for a 2008 GMC Acadia
  The 2008 GMC Acadia Draw-Tite Max-Frame Trailer Hitch Receiver Class III - 2" # 75528 is a quality choice for your vehicle, and it comes with all the hardware you'll need for installation. If you plan on towing, you'll want to grab a wiring harness and ball mount set-up as well. Wiring harness for a vehicle without a tow package # 118451 Wiring harness with tow package # 118384 I recommend the etrailer Ball Mount Kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip,...
  view full answer...
• Will the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector Fit a 2022 Ram 1500 TRX
  Yes, the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118384 will fit a 2022 Ram 1500 TRX.
  view full answer...
• Adapter Recommendation for Adding 4-Way to Rear of 2017 Ford F-250
  Easiest way would be to wire in a 4-way with the kit part # 118384. This wires in line with the 7-way you have at the rear of your truck to give you an additional 4-way that you could use for your boat trailer as needed.
  view full answer...
• Trailer Hitch Receiver & Wiring For 2018 Jeep Grand Cherokee to Tow Camper Trailer
  I can help you out with that, and to tow a camper trailer with your 2018 Jeep Grand Cherokee, and let's start with the hitch, with the correct fit depending on the model of your '18 Grand Cherokee: - All Models EXCEPT Trackhawk & Models With EcoDiesel Engine: Draw-Tite Max-Frame Trailer Hitch Receiver # 75699 - Models With EcoDiesel Engine: Draw-Tite Max-Frame Trailer Hitch Receiver # 75713 As for the wiring kit, you will need one if your '18 Grand Cherokee does not already have a hitch...
  view full answer...
  
• Boat Trailer Pulled by 2001 Chevy 1500 Has Lights That Will Not Work When Brakes are Applied
  I would suspect a poor ground connection on the trailer. Most trailers use a ground connection at the front of the trailer, with each lamp picking up its ground connection by its physical contact with the trailer frame, in effect, using the trailer itself as part of the ground circuit. Take a look at the grounding point for the trailer connector, it can usually be found on the trailer tongue near the coupler. Make sure that this ground connection is tight, and connected to clean metal....
  view full answer...
• Turn/Brake Trailer Lights Not Working After 4-Way Install
  Thank you for your purchase from etrailer of the # 118384 connector. There are a number of issues to check if your brake lights/turn signals on your trailer are not working, which is what I assume the results are that you were referring to. You mentioned a 4-pin tester and I'm not sure if that means a circuit tester or plug-in tester but to troubleshoot you'll need Circuit Tester # PTW2979. Then what you'll do is take a look at your owner's manual to locate any trailer fuses or relays...
  view full answer...

Do you have a question about this Custom Fit Vehicle Wiring?