7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
Item # HM40975
Our Price: $36.33
Confirmed to Fit
2020 Chevrolet Silverado 1500
with factory 7-Way
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (2379)
- Q & A (0)
- Photos
2020 Chevrolet Silverado 1500 - 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- 7 Round - Blade
- 4 Flat
- Trailer Hitch Wiring
- Hopkins
- No Converter
This 7- and 4-pole trailer connector eliminates the need for an adapter and allows you to tow a trailer with either a 7- or 4-pole plug. Socket connects to your Chevrolet Silverado 1500's OEM wiring system and mounts with included bracket.
Features:
- 7- and 4-Pole trailer connector with mounting bracket
- Has high-impact, ABS plastic construction
- Stainless steel spring for easy cover operation
- Rubber gasket provides weather-resistant design
- Includes mounting bracket for easy, snap-in socket installation
- Black, epoxy-coated steel construction
- Mounts to bumper with included screws
Specs:
- Application:
- Replaces factory 7-way connector on Chevrolet, Ford, GMC and Nissan trucks and SUVs
- Can be used to add a connector to 2003 and newer GM pickups and SUVs
- Bracket dimensions: 4-3/4" long x 3-1/16" tall x 1-3/4" deep
- Distance between mounting holes (center to center): 2-3/8"
- 1-Year limited warranty
Note: Only one connector - a 4-way or a 7-way - can be used at a time because the covers on this socket will not open far enough to allow use of both plugs at the same time.
Similar to 11775, PK11893
40975 Hopkins 7- and 4-Way Trailer Connector Socket with Mounting Bracket - Chevrolet Silverado 1500 End
Installation Details
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End - HM40975
Average Customer Rating: 4.8 out of 5 stars (2379 Customer Reviews)
This 7- and 4-pole trailer connector eliminates the need for an adapter and allows you to tow a trailer with either a 7- or 4-pole plug. Socket connects to your vehicle's OEM wiring system and mounts with included bracket.by: ChrisP05/05/2024
This connector and bracket is a great product giving both 7 pin and 4 pin connections. I was able to reverse the bracket (making new holes) to allow it to fit behind the bumper cover piece that hides the hitch when not in use. The only drawback is that a wiring harness that fits the round 7 pin to the Buick Enclave rectangle plug is not available as a separate purchase. Had to buy an additional 7 pin outlet that came with the correct plug assembly and use that for my combo plug.
by: Michael07/12/2023
The box arrived opened and damaged. My wiring harness was missing. When I called to tell them my wiring harness was missing they told me that it was shipping separately but could not tell me when it would arrive. I later got an email telling me all of my items were delivered and asked me to leave a review. I still don't have my wiring harness and will not have the hitch installed by this weekend like needed because I don't know if I am ever getting my wiring harness.not to mention the box had no padding around the hitch so it's all scratched up.
by: 2006 Silverado 2500HD08/03/2023
Worked exactly how described, great replacement for my risty only bracket and 7 pin connector. Fits my 2006 Chevy Silverado 2500HD perfect, plug and play. Bought specifically because the bracket is included. And with both 4 and 7 pin connectors, I don't have to use an adapter anymore!
by: Jason06/24/2023
I am not sure how this bracket passed quality control. It sure is a good thing I'm not planning on using it. Really disappointing to see how quality is overlooked during the packaging process. This should have never left in this condition.
Jenny N.
6/30/2023
Oh! It is definitely not how we want the bracket to arrive to you. I will have our Customer Service team reach out.
by: Thomas 05/20/2024
This company is an absolute pleasure to work with. Item was delivered fast and exactly as described. This is the second item I’ve bout from etrailer the first being a 9000lb rated hitch. Will order again from these folks when if I need stuff for my truck.
by: James 02/28/2023
2021 ChevroletSilverado 1500
Easy installation and very helpful installation video.
James
3/8/2024
One year later and no issues
by: Jim04/17/2024
It was easy to install and took care of the issue I had of one of the trailer light segments not working.
by: JimH05/13/2024
Very high quality connectors and bracket. Just what I needed.
by: Brad 04/11/2024
I bought this because I needed the bracket and it was the quickest way to get it they do not stock the bracket alone. We where installing tommy lifts and needed t move the original connector which was installed on the bumper.
by: William 05/06/2024
took longer to remove the factory cover than to instal the connector. worked as advertised. I would buy this again if ever needed
by: Ali 12/30/2022
This thing couldn't be better. Easy mounting. Plug and play. I can now connect any trailer I want. Love it, love it, love it!
Ali
1/7/2024
This was a major upgrade for me at the time. A year later, Ive hauled massive loads across the country, and this connector harness works perfectly every time
by: Ron P03/17/2014
2014 Chevrolet Silverado
Here's some snaps of my Hopkins #40975 installation. I can confirm that it's an identical replacement for the 2014 Silverado 1500 trailer-light blank insert, no bracket required. It took me 30 seconds to plug the Silverado's OEM 7-pin round connector (located inside the blank insert) into the #40975 Wiring Kit and snap it into the cutout. Then I tested the flat 4-pin outlet of the #40975 with a 5 dollar 4-pin LED tester from West Marine, and all light functions tested good. Shweet! To remove the OEM blank plug, it helps to reach behind it and pinch the two spring clips holding it in place... same with the #40975 if it needs to be removed for some reason. When I ordered the part from eTrailer, your site had a comment, "This will not fit your vehicle. See below for compatible parts," or words to that effect. Maybe take a look at that and remove the comment, as the #40975 is an exact fit for 2014 Silverado 1500, no bracket needed. Thanks, eTrailer team!
Ron P.
3/19/2015
Although I havent towed since installing the Hopkins Pollak wiring kit since I installed it a year ago, I have tested the 4-pin connector for proper function using a 4-pin LED tester from West Marine and it checks out okay. Recently I inspected the kit for water intrusion mentioned by one of the raters, and I found no evidence of moisture inside the dual-connector compartment. On installation, I did make liberal use of the dielectric grease that accompanies the kit. Good product, easy installation, and great price.
by: Russell 05/21/2024
Plug and play baby! 2 minute install. Finally an easy fix to something!
by: Matt W07/07/2018
2017 Nissan Pathfinder
It came with it's own bracket, which is a plus. It was compatible with etrailer.com's part number C56357, which is also a plus. The self tapping screws being the only hardware coming with the item was a disappointment. I just installed etrailer.com's part number 76301 hitch receiver which has a mounting plate for brackets like this. The self tapping screws, which might have been effective, wouldn't have looked "professional." After finding some hardware which worked, it went on smoothly and fits well with the rest of the assembly.
Matt W.
7/7/2019
This product has been working well for the past year. I feel this was a smart purchase.
by: Rob09/22/2018
2015 Audi Q7
Scratched my head for a while, trying to find a quality way to connect this vehicle end 4/7 wire socket to my trailer ready (almost) 2015 Audi Q7. Finally decided that it really didn’t need to be bolted, but could be hose clamped to the existing heavy duty Audi bracket.
Mounted it sideways with a 1” diameter and a 3” diameter hose clamp. Be sure to use a 3” clamp with lots of serrations that all it to tighten it down a lot.
You’ll need to drill out the small hole of the supplied bracket to allow a clamp to fit through it. The other hole is a slot, and works unaltered. Small clamp on bottom, large clamp on top.
You’ll also need to relieve a small spot on the trim piece to make room for the 4-wire door to o-en freely. This is marked as red on one of the pictures.
Looks good and should work good!
Rob
9/22/2019
Good installation approach for q7’s. Keeps water from collecting in wiring junctions.
by: Dennis 02/08/2024
2010 Ford Van
This dual connector adds a professional looking touch to our tow wiring installation
by: Mike07/15/2023
7 and 4-Pole Trailer Connector Socket does not fit my towing vehicle.
Today I just received my etrailer order #114979486, that consisted of: Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector (ITEM # C56431) and 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End (ITEM # HM40975) for my 2020 Ford Ranger. I easily installed the harness, but the Trailer Connector Socket does not seem to fit on the rear bumper, next to the license plate.
Last week, I chatted with etrailer customer support rep and I was assured that the connector Socket (ITEM # HM40975) would fit on my 2020 Ford Ranger.
This etrailer customer support representative referenced a previous Q&A Topic titled, "Can the HM40975 be used on a 2021 Ford Ranger". I was also assured that 2020 and 2021 Rangers have identically constructed rear bumpers.
Today, I spoke with a different etrailer customer support representative. This rep told me 7-Way Trailer Connector (ITEM # C56431) was not compatible with the 2020 Ford Ranger recommend reaching out to the manufacturer directly for more information.
I'm very frustrated!!!! Can I please get a solution to this issue ASAP.
Jenny N.
7/19/2023
I am sorry that this has been a frustrating experience, however I do have an answer for you. The Hopkins connector part # HM40975 is technically not a fit on its own for a 2020 Ford Ranger. The short reason why is that the Ford Rangers do not have the round US Carr type of connector to plug into. Now by adding the Curt harness part # C56431 like you did, does make that round connector that you can plug into the back of the Hopkins connector that will give you the 7 and 4 way you want. Since it is using two different manufacturer products together, I do encourage you to test the 4 and 7 way to make sure all the signals are working correctly. In theory they work together, however they are not tested. The issue is going to be that the bracket that comes with the Hopkins connector is not going to match with anything on the Ford Ranger to connect to. It would just be bolted to the bumper or you could also consider using part # C57202 to install it on your hitch.
by: Mark 03/20/2024
2018 ChevroletSilverado 1500
Item received as described. It was simply plug and play. Out with the old, and the new was an exact replacement. Very satisfied.
by: Bert 03/28/2024
The self tapping screws that come with the mount are junk,
The product is Good.
by: Lonnie04/08/2024
Great product, it was just what I was needing to complete my project.
by: Bill04/07/2024
2020ChevroletSilverado 1500
Another easy installation old one out doing in 15 minutes
by: Doug 11/02/2022
Fit and works fine. My old one was just the 4 plug so now I don’t have to use the adapter for 7 prong anymore.
Doug
11/3/2023
Works fine- no issues.
by: Steven 04/21/2024
2022 Nissan Titan
Came in on time. The parts were in good shape and fit perfectly.
by: Guy05/22/2022
2003 GMC Sierra
Top quality trailer connector that fir original wiring harness perfectly.
Installed in under 15 minutes.
John C.
7/26/2022
Works great and looks great. Get compliments on the hitch.
by: 1957okie04/03/2014
Great product at a great price. It was an exact fit and looks great. I like having the ability to plug in my 7-prong plug on my travel trailer or the 4-pin plug on my boat, without needing an adaptor. Got super fast shipping too. Buying from etrailer.com was a win- win-win.
Bob R.
5/31/2014
What year is your silverado
Rachael H.
6/4/2014
Randy S.
6/6/2014
Its a 2014 Silverado 1500 Double Cab
25
2378
Show More Reviews
See what our Experts say about this Hopkins Custom Fit Vehicle Wiring
- Trailer Wiring Harness Adapter for a 2014 Chevrolet Express VanThe 2014 Chevrolet Express Van if equipped with the factory tow package would have come with a US-Car connector which you can see in the attached video at about the 1:30 mark. In order to use this US-Car connector you will need an adapter to go from this to the end of the bumper, the Hopkins Plug-In Simple Wiring Harness part # 41155 for a 4-way or the 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket part # HM40975 for a 7-way. The 2014 Chevrolet Express Van if not equipped...
view full answer... - 7-Way and Trailer Hitch Recommendation for 2019 Chevy Express VanSince you have the factory tow package wiring all you'd need for a 7-way is the part # HM40975 which attaches to the round connector you have at the rear of your vehicle and provides both a 7-way and a 4-way plus comes with a mounting bracket. Then for a hitch the etrailer hitch # e98861 is also a fit for your 2019 Chevy Express van. It's a really great option as it has higher towing capacities, installs very easily, and is priced great too. I attached an install video for this for you...
view full answer... - How Visible is Curt C26HR Trailer Hitch Installed on 2019 Ford F150As you can see in the provided photo, the Curt # C26HR Class IV trailer hitch receiver is well concealed behind the truck's bumper. The only visible portion of the hitch is the receiver tube and the bracket that would receive the hooks on the trailer safety chains. The rest of the hitch will be hidden behind the rear bumper. If you need the trailer connector, use part # HM40975 (which is the exact same as the OEM connector.) If you click the provided link, you can see an install video...
view full answer...
- 12-Volt Feed at Trailer Connector Not Active on 2016 Ram 3500We've ran into this before, you've either got a blown or a missing 30A fuse in position # F30 in the fuse box in the engine compartment. Also check # F87 for a 10A. Once the fuse is installed, that circuit should power up and work fine for you.
view full answer... - How to Activate 12 Volt Accessory Circuit of 7-Way on Truck without Factory WiringSounds like you hardwired the install of a 7-way like the # HM40975 to a vehicle that didn't have trailer wiring prior. So to activate the 12 volt accessory circuit of the connector you'll just need to run a wire from the 1:00 pin of the 7-way with 10 gauge wire like part # 10-1-1 (sold by foot) through a 40 amp breaker # 9510 to the positive pin of the battery and you'd have the circuit active. Even on some vehicles that have factory 7-way wiring this method is required as they don't...
view full answer...
- Tekonsha # TK90160 Brake Controller NC or OC Error Message on 2018 Nissan PathfinderIf you find significant corrosion you may need to replace the connector with # HM40975 for the vehicle wiring or # H20042 for the trailer end. However, if cleaning the 7 way connector on your 2018 Nissan Pathfinder doesn't correct the errors then it's likely that you have a short on the electric brake circuit or there is a problem with the brake magnets themselves. What we first want to do is isolate either the vehicle or the trailer as the source of the problem. Using a circuit tester...
view full answer...
- Is the 7- and 4-Pole Trailer Connector Socket a Fit for Ford TrucksThe 7-Pole and 4-Pole Trailer Connector Sockets w/ Mounting Bracket and Wiring # HM40975-11998 is a hard wire application, as you can see in the linked installation video we made of this being put on a 2008 Ford F-250. If you only need to connect the plug, which is 7- and 4-Pole Trailer Connector Socket # HM40975, that is a direct replacement for many different years, makes and models of Ford trucks with a factory 7-way; for example it is a fit for a 2018 Ford F-150. If you let me know...
view full answer... - Troubleshooting a 2000 Chevy Silverado with No Brake Lights on the Trailer PlugThe first thing I would do is inspect the front and back of your trailer plug for corrosion on the brake light circuit and clean as necessary. Typically when the problem you described arises its because of corrosion. Next I would use a circuit tester like our part # 3808 and and test the back side of the connector to see if the voltage is making it to the connector. If there is voltage there then you know the problem lies somewhere in the trailer plug and should be inspected for loose...
view full answer... - Adding a 7-Way Trailer Connector to a 2006 Ford F-150 with a Factory 4-Way Flat ConnectorThe 7-Way connector # HM40975 is designed as a replacement for an OEM 7-Way on a 2006 Ford F-150. What you will need is # 37185 and do a little hardwiring. What you will do is follow the factory 4-Way forward on the vehicle where it plugs into another connector along the driver side frame rail. This connector has more wires going into it than coming out to the 4-Way side. If you peel back the covering on the forward connector you will find some additional wires. There should be an orange...
view full answer... - Parts Recommendation for Adding 7-Way to 2022 Ford Transit T250I like the way you think! To get everything you need in a nice bundle I recommend the Tekonsha OEM Replacement Wiring Kit # 22114. This tees in behind the tail lights on your 2022 Ford Transit T250 and then comes with everything to get you that fully functioning 7-Way. It even includes a brake controller harness that fits directly to a Draw-Tite, Reese, Pro Series, or Tekonsha brake controller like the popular Prodigy P3 # 90195. To get the most out of your wiring setup I recommend also...
view full answer...
- Troubleshooting Tail Light Not Working When Connected to TrailerIf your taillight does not work when your trailer is connected you will need to follow some troubleshooting steps. in order to determine the specific problem you will need to use a circuit tester such as # PTW2979 to test the connector on your Silverado after disconnecting it from your trailer. Check the wiring going into your harness from your tail lights to see if those wires are carrying the correct signals, if not then the issue is with the vehicle wiring. If the signals going to...
view full answer... - Vehicle Wiring Harness For a 2022 Ford F-150 Without Factory Tow Wiring HarnessI recommend adding the Tekonsha Universal 7-Way # 22551 on your 2022 Ford F-150 as there is not an aftermarket custom fit wiring harness. You will be able to switch out the included 7-way connector for the 7- and 4-Pole Trailer Connector Socket # HM40975 so you will be able to have both connectors without needing an Adapter # 78118. If you are needing a brake controller the Prodigy P3 # 90195 is a very user friendly controller that is easy to read and customizable. It will plug into the...
view full answer... - Replacement 7-Way/4-Way Plug For 2017 GMC Sierra 1500While we do not make the factory replacement, we do sell the replacement 7-way/4-way plug for your 2017 GMC Sierra 1500. The correct part number is the following: - 7- and 4-Pole Trailer Connector Socket # HM40975 While this does come with a bracket it's not something you'll be using, it's just only sold with the bracket. Also, to help prevent shorts, when installing the socket I do highly recommend using Dielectric Grease # 11755.
view full answer... - Recommended Trailer Hitch and Brake Controller for 2021 Ram 1500 The trailer hitch I recommend for a 2021 Ram 1500 is the Draw-Tite Max-Frame Trailer Hitch Receiver part # DT37MR which offers an easy bolt-on fit and has a towing capacity up to 6,000 lbs. It also comes with a cap to fill the hitch ball hole in the bumper which is not something the other options offer. In regards to wiring, the 7- and 4-Pole Trailer Connector Socket part # HM40975 is our best option as the plug will fit the factory cutout in the bumper. The included bracket will be discarded....
view full answer... - Wiring Needed To Install A Redarc Trailer Brake Controller On a 2018 Ford Transit 250Since you have that harness with your 2018 Ford Transit 250 you may have the wiring for a tow package and just not have the connector on the back. You can look behind your rear bumper for a round connector like the # 20147. If you have this you can simply plug in the Connector # HM40975 to have both a 7-way and 4-way on the back of your Transit. The connector for the brake controller is going to be located under the cup holders on your center console. This would allow you to splice in...
view full answer... - Recommended Trailer Hitch and 7-Way for a 2015 Chevrolet Express VanThe Draw-Tite Ultra Frame Trailer Hitch Receiver part # 41946 is a great option for a 2015 Chevrolet Express Van. It will allow you to tow pretty much any trailer within reason due to the Class V rating. I have attached an install video below. In order to complete your setup you'll need wring as well, the T-One Vehicle Wiring Harness part # 118392 would start you off with a 4-way which could then be adapted to a 7-way using the 4 to 7-Way with 4-Way Adapter part # ETBC7. It does not sound...
view full answer... - 4-Pole/7-Way Trailer Connector for 2019 Nissan FrontierWe don't offer a kit that will do exactly what you're wanting to do, but there are some mix-and-match options that can get you the trailer connector setup you're wanting. By all-in-one, I assume you're speaking of something like part # HM40975. If your Frontier is a Canadian market vehicle, you can use the # 118282 and replace the provided 7-way connector with the # HM40975. If it's a US market vehicle, you'd unfortunately have to go with the full # 118266 kit, and replace the provided...
view full answer... - Recommended Trailer Hitch for a 2020 Ford RangerThe trailer hitch that I recommend for a 2020 Ford Ranger is the Curt Trailer Hitch Receiver part # C13417 which is a custom bolt-on fit that does not require any cutting or drilling. The process should actually only take you around 20 to 40 minutes. I have attached an install photo for you as well. For a trailer wiring harness, the T-One Vehicle Wiring Harness part # 22124 is your best option as it does not require any splicing therefore is almost entirely plug and play. I also recommend...
view full answer...
- Will Hopkins Combo Plug Fit 2013 Ram 3500 and Troubleshooting ConnectorYes, the 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket # HM40975 is the correct part to replace the factory 7-Way on your 2013 Ram 3500. As far as troubleshooting wiring goes it is always best to start off by checking the fuses on your vehicle. I looked in the online owner's manual for your pickup and it looks like you need to check fuse locations F28, F29, F30, F53, and F81 in your power distribution panel (in your engine compartment). If those look good then your next step...
view full answer...
- Replacement 7-Way/4-Way For Toyota TundraLooks like you are looking for just the 7-way and 4-way connector from the picture you sent in which we have the exact one you have now with part # HM40975 for an easy replacement. This will plug right into the round connector you have and will also easily attach to the bracket.
view full answer...
- Troubleshooting Trailer Running Light Circuit Not Active on Truck But Tester Shows VoltageIf you have power to the taillight pin of the 7-way on your truck but you can't get the circuit to activate with a connected trailer this commonly is caused by corrosion preventing the connection from being made or the pin being bent back which also prevents the connection from being made. I also attached a help article on troubleshooting trailer wiring for you to check out as well.
view full answer... - Will 7- and 4-Pole Connector Work With Custom Fit Vehicle Wiring for 2004 Ford F-150 HeritageYes, the Pollak 7- and 4-Pole Trailer Connector # HM40975 will work with your Tow Ready Harness # 118242. The 7- and 4-way connector will plug into the harness the same as the 7-way connector that came with the harness.
view full answer... - No Running Lights from 4-Pole on Factory Connector of 2008 Dodge DurangoIt sounds like your 2008 Dodge Durango has a factory-installed combination 4-way/7-way trailer socket like # 30955 or # HM40975. Both of these replacement parts install using a round 7-pin U.S. Car connector that plugs in to the back of the socket. Please refer to the linked photo to see the rear of part # HM40975 that shows the round plug. First, test without your adapter. Make sure the main ground wire on the truck AND trailer is securely attached to a clean bare metal surface, one...
view full answer...
- 4-Way to 7-Way Adapter Recommendation for a 2010 F-150 without Tow PackageSince you have a factory 4-way you are going to need a brake controller installation kit part # ETBC7 to convert your 4-way to a fully functional 7-way. This kit comes with everything you would need, I attached an installation video and installation instructions for this product for you to check out also. If you only need the tail light functions you could get a Adapter 4 Pole to 7 Pole # 30717. You would just need to tape off the extra wires that would not be used. I attached a review...
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Shane T
Test Fit:
Randy B
Test Fit:
Joe B
Test Fit:
Andrew S
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
Jacob H
Test Fit:
Ryan G
Test Fit:
Adam E
Test Fit:
Matthew B
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Lori W
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Andrew L
Video Edited:
Kathleen M
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
John S
Video by:
Andrew K
Video by:
Alan C
Video by:
Zach D
Video by:
Jonathan Y
Video by:
David F
Video by:
Aidan B
Video by:
Thomas T
Written by:
Tyler C
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Alexander C
Installed by:
Cole B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Katrina D.
8/3/2023
I am sorry to hear that your order arrived in this condition. I see that our customer service department is currently working on a solution for you.