Vehicle Wiring Harness For a 2022 Ford F-150 Without Factory Tow Wiring Harness

Question

Question:

I have a 2022 Ford F150. It doesn’t have a wiring harness installed and looking to put one on. Wanted to verify which harness is best for the year make and model. I would also like to have a harness that has a 4 point and 7 point connection together. Thank you for the help greatly appreciated it!

asked by: Andres B

0

Expert Reply:

I recommend adding the Tekonsha Universal 7-Way # 22551 on your 2022 Ford F-150 as there is not an aftermarket custom fit wiring harness. You will be able to switch out the included 7-way connector for the 7- and 4-Pole Trailer Connector Socket # HM40975 so you will be able to have both connectors without needing an Adapter # 78118.

If you are needing a brake controller the Prodigy P3 # 90195 is a very user friendly controller that is easy to read and customizable. It will plug into the universal 7-way kit linked above so you will not have to use an adapter or custom splice into the harness.

Our etrailer Trailer Hitch Receiver # e63TR is a great option if you do not already have one. This uses a matte black powder coat finish leaving a clean factory appearance.

expert reply by: Bud M

0

Answer 1

For your 2022 Ford F-150 I recommend the etrailer Trailer Hitch Receiver #e63TR. This is a Class III hitch with a 2" receiver. It features a bolt-on installation and comes with a limited lifetime warranty. The maximum gross trailer weight…

view full answer...

Answer 2

We'll start out making sure your RV has a hitch and wiring harness in case you don't already have them installed. To add a hitch to your 2000 Newmar Mountain Aire RV, you will want the Curt Adjustable Trailer Hitch Receiver item…

view full answer...

Answer 3

No, the Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter #TK74CR will unfortunately not work with your 2023 Kia Telluride with LED lights. Your best bet would be to use a universal wiring harness #C59236 which will work…

view full answer...

Answer 4

To install a 7-Way harness on your 1996 Dodge Ram without the factory connector, you will need two separate wiring harnesses because they don't make just one that'll do the job. The first harness you'll need is the Curt T-Connector…

view full answer...

Answer 5

Currently the Vehicle Wiring Harness #C45FV is the only custom fit wiring harness available for your 2023 Mazda CX-50. This harness is for a 4-way flat connector that will fit most of the smaller trailers you may tow. This will likely be the most…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

For your 2007 Chevy Kodiak C4500 Bus I recommend the Curt Adjustable Trailer Hitch Receiver - 18"-51" Wide - 2" Drop - Class III - 2" Item #C13701. This hitch is a universal hitch for RVs. It is bolt on or weld on and fits frames…

view full answer...

Answer 8

There are a number of factors involved when converting a semi 7-way to an RV 7-way. Semis generally use a 7-pin round pin socket, similar to #PK11720. And RV style 7-way uses blades, like #PK12706. We do not offer any pre-made adapters to make this…

view full answer...

Vehicle Wiring Harness For a 2022 Ford F-150 Without Factory Tow Wiring Harness

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching