Troubleshooting Tail Light Not Working When Connected to Trailer
Question:
on 2005 silverado taillight works but when brake is to trailer nothing what could the problem with hopins or curt
asked by: Landis B
Expert Reply:
If your taillight does not work when your trailer is connected you will need to follow some troubleshooting steps. in order to determine the specific problem you will need to use a circuit tester such as # PTW2979 to test the connector on your Silverado after disconnecting it from your trailer. Check the wiring going into your harness from your tail lights to see if those wires are carrying the correct signals, if not then the issue is with the vehicle wiring.
If the signals going to your harness are okay, you'll need to test the signals coming out of the harness, and if they are correct then your issue is likely going to be with the trailer side wiring. You will also want to check both your vehicle and trailer connectors for corrosion, which can be green or white in color. A build-up of corrosion can interfere with the signals getting through the connectors so if it is present you will need to either replace the plug or clean the corrosion and be sure to use Dielectric Grease # LT37534 to help stop any future corrosion.
As I mentioned above, an important issue you will want to take a look at are the ground connections, as they can be the cause of numerous lighting problems. You'll want to make sure your grounds are securely attached to bare metal surfaces free of any paint, dirt or corrosion of any kind. Also check your wiring thoroughly to ensure there are none that are crimped, broken or otherwise damaged.
I have added links to a pair of help articles on trailer wiring, including a troubleshooting guide which I highly recommend taking a look at.
Products Referenced in This Question
Loctite Bulb, Lamp, and Electrical Connection Dielectric Grease - 0.33-Oz Tube
- Accessories and Parts
- Wiring
- Dielectric Grease
- Loctite
more information >
Product Page this Question was Asked From
7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 7 Round - Blade
- 4 Flat
- Hopkins
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: How to Choose the Right Trailer Hitch Class
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: My Trailer Hitch Doesn't Fit
- Article: Brake Controller Installation: Starting from Scratch
- Article: How to Measure for Trailer Hitch Drop
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Availability Of Hub/Drum Kit With Brakes And Hardware Similar To Part BPH1206EPR
- Q&A: Availability of Trailer Hitch and Wiring for 2020 Ford Transit T350 With Extended High Roof
- Q&A: Parts Needed To Add a Tow Package To a 2024 GMC Canyon
- Q&A: How Does the Hopkins 7-Way part # HM40975 Wire to a Vehicle
- Q&A: Does Trailer Hitch For 2023 Chevy Colorado Have a Hidden Crosstube