bing tracking image
  1. Custom Fit Vehicle Wiring
  2. Chevrolet
  3. Equinox
  4. 2011
  5. Tekonsha
FITS 2011 Chevrolet Equinox
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

Item # 118494
Retail:$87.11
Our Price: $74.91
You Save: 14%
Custom Fit Vehicle Wiring
Confirmed to Fit
2011 Chevrolet Equinox

without factory Tow Package

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
In Stock
118494 - Custom Fit Tekonsha Trailer Hitch Wiring
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Call etrailer.com at 1-800-940-8924 for expert service. We are your Chevrolet custom fit vehicle wiring experts, and offer a great price. etrailer.com carries a complete line of Tekonsha products for your Chevrolet Equinox 2011. T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part 118494 from Tekonsha can be ordered online at etrailer.com. Complete custom fit vehicle wiring installation instructions and technical support.
  • All Info
  • Reviews (162)
  • Q & A (0)
  • Photos

2011 Chevrolet Equinox - T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

  • 4 Flat
  • Trailer Hitch Wiring
  • Tekonsha
  • Powered Converter

Quickly and easily install a 4-way trailer connector on your Chevrolet Equinox with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.


Features:

  • Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
    • Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
  • Connects quickly and easily
    • Locate connection points in rear cargo area
    • Plug in T-connector
    • Run hot lead to car battery
  • Includes ModuLite to ensure that your vehicle's wiring matches that of your trailer
    • Powered module connects directly to battery to avoid overloading vehicle's electrical system
  • Constructed of 16-gauge bonded wire
  • Comes with dust cap for 4-way flat connector


Specs:

  • Maximum amperage:
    • Stop/turn lights: 2.1 amps per circuit
    • Tail lights: 5.6 amps per circuit
  • 1-Year limited warranty


Installation

This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side interior trim panels in your rear cargo area. Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery and insert the provided fuse.


Once installation is complete, the 4-way flat connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.


It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.


ModuLite Powered Tail Light Converter

A ModuLite power module is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. This power module functions as a tail light converter to combine the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.


With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.



118494 Tow Ready T-1 T-Connector - 4 Wire - Modu-Lite

Installation Details 118494 Installation instructions

California residents: click here


Customer Satisfaction Score:


Customer Reviews

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118494

Average Customer Rating:  4.7 out of 5 stars   (162 Customer Reviews)

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.

by:
ChevroletEquinox

I've been a customer of etrailer for many years, and purchased a variety of items. This wiring harness was just what we needed when adding a hitch to our recently-rehabbed salvage vehicle ('15 Chevy Equinox). Now it's worth more than twice what we paid for it! etrailer made sure we got the right harness the first time. Great service and prices!



by:
2015 ChevroletEquinox

it works but had to remove fender lights could not handle the load. but I had 22 tail and running lights. they were vary dim. removed fender lights [4 of them] not needed for reg. or inspection. now all 18 are bright as should be. And trailer is legal . fender lights can live with out. now at least I can set on them.

James G.

9/26/2021

Great no complaints here. very satisfied with product.



by:
2016 ChevroletEquinox

The wiring kit (118494) went together flawlessly, everything hooked up perfectly. I also installed a draw-tite hitch (76028) which also went in flawlessly. This should work great to pull my enclosed trailer and to hook my bicycle rack to. Thanks for a great product.



by:
2014 ChevroletEquinox

Have had it for a year now with no issues. Easy to install and works great.

Robert H.

10/18/2023

Still working with no issues!

Etrailer Expert

Mike L.

11/9/2023

@RobertH We're happy to hear that, thanks!


by:

Went super easy. Did it over my lunch break at the shop I work at. Ran a tap through the 4 weld nuts from the factory and everything fit together like it should. Way easier on a lift then on the ground but it can be done.



by:

Product worked as it should! Easy to in stall.



by:
2013 ChevroletEquinox

This is my second wiring order for two different vehicles. Both wiring systems were great. The first one I ordered was not the right one because I ordered the wrong one but they exchanged it promptly.



by:
2010 ChevroletEquinox

I replaced a similar wiring harness because the module had failed. New harness is working great. Installation on an Equinox a bit tricky but doable. As pointed out by other reviewers, wiring length could be a bit longer to help with installation. Suggest buying a tester so do not find out when renting a trailer there is a problem.

George L.

8/23/2017

After a year the module replaced is still working great.



by:
2014 ChevroletEquinox

The wire harness was extremely simple to install because of the directions provided. Although I don't pull my trailer on a regular basis when I do I never have any issues with my lights. I would recommend this product to anyone wanting to add towing capabilities to their equinox.

Sergeant C.

7/30/2018

A year later and still no issues with it.



by:
2014 ChevroletEquinox

Overall this is an OK wiring harness. I bought this for my 2014 Chevy Equinox and to put it bluntly it didn't fit. The control unit on the left side worked fine but to get the right side green wires to connect to the passenger side blinker the wire simply wasn't long enough, fortunately I was able to solder an 12" extension into the wire however I feel I really shouldn't have to do that. I was routing it according to the instructional video provided on etrailer.com.

Secondly, I find it a little weird that this unit requires a battery feed at all, it's really just acting as a relay, I have used other harnesses before that didn't require a hot power source...seemed weird and unnecessary for a 4 pole wiring harness that is just doing flashers and brakes lights...

If you can't find anything else get this



by:

Best price, fast delivery and the absolutely best instructional videos available.



by:
2016 GMC Terrain

This is an excellent product and has all the required parts for installation. I would recommend quite a few more nylon wire ties, but most of us have lots of them anyway. Just to mention that, if you get the wires in the wrong position when fishing them through the "boxed" part of the body, they can get severely stuck. I found the same issue when fishing the bolts through that same place for the hitch. This is on my 2016 GMC Terrain. There is a bolt and a metal "tab" that could make fishing a real nightmare. The video instructions are great, but not the printed version included in the kit.



by:
2010 ChevroletEquinox

Installed on 2010 Chevy Equinox that did not have factory tow package. Spent a little extra on flexible tubing and ran power wire inside tubing from converter to battery.
Followed the brake lines from from to rear. Instead of mounting power converter under the vehicle as shown in video and instructions, I mounted the converter in the left side tail light bay. The wire harness to the right side tail light was now too short so spliced in a length of wire and was able to run the right side harness inside the square tubing that the rear bumper attaches to. Also ran the right side harness in flex tubing.

For the price, they should add a few feet to the right side harness. Other than that, install was easy.



by:
2013 ChevroletEquinox

I first heard of etrailer while searching for a video on installing a trailer hitch on my suv...The video was very informative and also had links for all the parts needed along with other accessories available for my equinox. With the help from there website link I had my order completed in less then 5 minutes. I highly recommend you take a look at there site. best part is after watching there video on installation I completed the trailer hitch and lighting harness in less then 30 minutes.

thanks etrailer,

Mike



by:
2012 ChevroletEquinox

The printed instructions and video are spot on. Good product, pretty easy to install if you are comfortable and/or familiar with minor electrical work (splicing and crimping). The only reason I did not rate as excellent is because I could not mount the T-connector black box behind the taillight (where the instructions suggested) because the wiring harness was not long enough. I had to mount on the undercarriage and may I may need to retrofit with some sort of securing device because I am not sure how long the double side tape will last. My only other challenge was deciding where I wanted to route the wire running from the battery terminal back to the driver side taillight. Additionally, you may want to have some extra and longer zip ties on hand. I used several more than what was supplied and found that I need some longer zip ties based on where I routed the wire along the frame.

Overall I am satisfied with the end result, they work perfectly!



by:

Fairly easy to install. The only issue is that the etrailer video shows the the modulite being mounted using double sided stickey tape on the undercarrige of the vehicle. When you do this the white ground wire does not reach up to the spot behind the driver side tailight where the instructions say to drill the grounding screw through the double sheet metal light. The white wire is only 12" long. I made other arrangements.
I have no picture yet as I have to gather the crew to go and stock up on wood pellets for the winter.



by:
2010 ChevroletEquinox

The product works perfectly on my 2010 Chevy Equinox. It is a bit of a pain to run the power wire from the back of the vehicle to the front. However, it just takes a bit of time to make sure the wire is routed and secured properly.

Joe

12/11/2015

did you end up just routing it under the vehicle?



by:
Ford Flex

Got this in short order and in good shape.
It's
a long and tedious process to get this installed.
Not because of the kit but because of the process.
Removing both tail lights wasn't too bad. But getting the
power wire from the rear to the engine bay is a pain. You
have to be careful if you want a decent looking job. If I did
another one I would use split corragated flex conduit all
the way from the back to the battery.
Can't really say anything bad about etrailer or this kit.



by:

Fairly easy installation. Works like a charm.



by:
2017 ChevroletEquinox

I emailed a question regarding pertains to products I need for my 2017 Equinox. Jameson promptly returned my email with links to each of the products.
I placed the order, received everything in great condition. Installations instructions were spot on, with videos posted for additional help if needed.
I’m very pleased with strainer, my start to finish experiance was superb.
Thanks etrailer, great work. You have nailed the lost art of customer service and satisfaction.



by:
2012 ChevroletEquinox

Too bad there is not a rating higher thanExcellent. This product worked well. The installation video on YouTube was most excellent and VERY helpful. Watching the videos helped me decide to buy from etrailer.com on both the Curt hitch and trailer wiring module package. I installed my hitch in about 45 minutes on 2012 Equinox and the trailer wiring kit in about the same time.
Also I had occasion to call and speak with one of the agents at trailer.com, she was very helpful and cordial. Great place to order from and to deal with, the best !!! I do not have any photos to post but the YT Videos do a great job of showing how it really looks.



by:

Instructions should include exact placement of the module behind the tail light. Green wire harness going to the right tail light could have been six inches longer. I had to tuck it behind the weatherstripping at the bottom of the tailgate opening to have enough. Otherwise it worked out fine.



by:
2016 GMC Terrain

Hitch is great! Installation was easy because of kit included in kit. Cost was great! Shipping was very quick! also wiring in the light kit was not to bad besides running power wire from front of car other than that... excellent!



by:
2013 ChevroletEquinox

This wiring kit was extremely easy to install. The informational video that eTrailer made on instillation is the reason why I bought from them. Between the experience of their experts and how detailed their videos and explanations are, it makes instillation a breeze for someone who doesn't do this on a regular basis!



by:

After many years of splicing trailer wiring, I started using harnesses for the right vehicles. Etrailer has been great with videos and customer service. I highly recommend Etrailer to everyone.


25
162
Show More Reviews

See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring

  • Tow Bar Lighting and Trailer Wiring Recommendation for 2016 Chevy Equinox
    For trailer wiring for your 2017 Chevy Equinox you would want the Tekonsha Kit part # 118494 which is a custom fit. Then for tow bar wiring you would want to go with a diode kit since the harness style kits can't be used with trailer wiring installed. For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle....
    view full answer...
  • Which Trailer Hitch Will Be Least Visible on a 2011 Chevrolet Equinox
    All the hitches we offer for your 2011 Chevrolet Equinox have similar designs, and they are actually going to fit in nearly the same location. There is a center panel in the center of your vehicle bumper that will be removed for the hitch installation, and the hitch receiver opening will fit up into the space that is left when the panel is removed. Because of this, the hitches for your vehicle are all going to be mostly hidden. The same hitches that fit your vehicle also fit some similar...
    view full answer...
  • What is the Correct Trailer Wiring Harness For A 2010 Chevrolet Equinox
    At this time there is not a vehicle specific wiring harness for the 2010 Equinox. You can wire your vehicle with the Upgraded Circuit Protected Modulite with 4 Pole Harness and Hardwire Kit, item # 118494. With this kit you will get everything needed to install a 4-pole trailer connector for towing. The Modulite kit uses a wire that is ran to the battery with a inline fuse to power the trailer lights, you will then use the included circuit tester to find the vehicle wiring, at the rear...
    view full answer...
  • Can 2016 Chevy Equinox with Draw Tite Hitch Tow 1,800 lb Trailer
    Yes, the etrailer hitch # e98865 and your 2016 Chevy Equinox would easily be able to handle towing a trailer that weighs right at 1,800 lbs like you mentioned. Then for trailer wiring the Tekonsha kit part # 118494 is the easiest to install and most reliable option.
    view full answer...
  • Replacement Hitch Installation Hardware for etrailer Trailer Hitch # e98865
    Hitch installation hardware is intended for a single use, so you are wise to obtain new hardware for installing your etrailer Trailer Hitch # e98865 in your 2014 GMC Terrain. All you need to do is enter the part number # RHK into the search box on our site, then enter your hitch number e98865 and we will prepare you a complete hardware kit. I have linked an installation video for this hitch in a 2014 Terrain as well as two articles that will provide useful tips for hitch installation. If...
    view full answer...
  • Trailer Hitch and Wiring Recommendation for 2012 GMC Terrain
    Basically the higher the hitch Class the more towing capacity it has. But the big difference between Class II and III is that III is a 2 inch hitch which is the most popular size due to capacities and accessories made for it and Class II is a 1-1/4 inch. If you plan to do any towing with your 2012 GMC Terrain I'd recommend going with the Class III. For that you'd want the etrailer part # e98865 which is a custom fit and our most popular option. It's also priced great too. For trailer wiring...
    view full answer...
  • Comparing Trailer Wiring Harnesses # 56094 and # 118494 for a 2011 Chevy Equinox
    The Curt T-Connector Vehicle Wiring Harness with 4 Pole Trailer Connector, # 56094, will fit your 2011 Chevy Equinox and will work to operate the trailer stop, turn, and tail lights. But, it does not have a circuit protected or powered converter to protect your vehicle wiring. If given the option, I will always recommend the circuit protected powered converter, # 118494, because it is designed to protect your vehicles sensitive wiring. What it does is virtually eliminate the extra power...
    view full answer...
  • Hitch and Accessories for Towing Dirt Bikes on Trailer With 2010 Chevy Equinox
    The Draw-Tite Class II Trailer Hitch, item # 36408, would work great for towing a small trailer, as long as it does not weigh more than 3500 lbs (trailer + load). However, I usually recommend that people at least consider going with a Class III hitch when they have the choice. A Class III hitch, like item # e98865, would allow for greater flexibility in the future, as you will have a better selection of accessories, such as a cargo carriers and bike racks. You'll also need a trailer wiring...
    view full answer...
  • How to Install a Brake Controller on a 2016 Chevrolet Equinox
    I do have a solution for you, but from the information that I could gather, it does not look like the 2016 Chevrolet Equinox has a built-in harness that you directly plug your brake controller into. Typically on any vehicle it would be in plain sight under the dash on the driver's side. To install a brake controller on your Equinox you will need to use the Universal Installation Kit # ETBC7. This kit does require you to do some splicing, but it will get you the connections that you are...
    view full answer...
  • Are Trailer Brakes Brakes Needed for 1000 lb Pop-Up Camper
    It will depend on what state you are located in. In most states, trailer brakes aren't required unless the trailer weighs 3500 lbs or more. This being said, if your pop-up is already equipped with them, it's not a bad idea to use them. If your popup is equipped with brakes, and you'd like to use them, the easiest way to make that happen if you have a smart phone would be by using the Curt Echo # C51180. If your Equinox has a 7-way trailer connector, the controller install would be plug...
    view full answer...
  • Installing etrailer Class III Trailer Hitch on 2011 Chevy Equinox
    The etrailer Class III Receiver Hitch # e98865 referenced in your question is confirmed to fit your Chevy Equinox and will use existing holes in its frame for a bolt-on, no-drill installation. I looked through the installation instructions and for your 2011 there is absolutely no vehicle modifications or trimming that needs to be done. This is indeed a direct, bolt-on fit. This etrailer, Class III hitch is an excellent choice and exactly the hitch I would have recommended. It will provide...
    view full answer...
  • How Does Brake Controller Install in 2014 GMC Terrain
    Yes, the install info you found for your 2014 GMC Terrain is accurate for the Denali and non-Denali versions. You'll need the brake controller, like the # 5504 you were looking at, or a proportional controller like the Primus # TK90160. A proportional controller has an internal sensor that can determine how quickly the tow vehicle is braking. It will then send the appropriate amount of voltage to the trailer brakes so the vehicle and trailer stop at the same rate. This provides safe,...
    view full answer...
    Image 1 for
  • Recommended Trailer Brake Controller for 2017 Chevy Equinox
    We have everything you need to get you set up to use a brake controller with your 2017 Chevy Equinox so you can pull your Rockwood camper. I assume you do not have the factory 7-way or tow package on your 2017 Chevy Equinox so you need to start by adding a 4-way, the T-One Harness # 118494. You will also need the Universal Installation Kit for Trailer Brake Controller # ETBC7, which will give you a 7- and 4-way trailer connector, circuit breakers and the rest of the hardware needed to...
    view full answer...
  • Recommended Replacement Trailer Wire Harness For 2016 Chevrolet Equinox
    It sounds like your vehicle was getting some electrical backfeeding from the Curt harness you had installed and that was causing the issues you said your Equinox is experiencing. We do have a solution that will work for you. I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector, part # 118494. We haven't had the same backfeeding problem with this harness. The included Modulite draws the power directly form the battery to eliminate a power draw on the vehicle...
    view full answer...
  • Does etrailer Trailer Hitch for 2014 Chevy Equinox Come with Installation Hardware
    Yes. Custom fit trailer hitch # e98865 includes all of the necessary hardware for installation on your 2014 Chevy Equinox. I have included links to the instructions and a video showing an example installation for you. If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage...
    view full answer...
  • Installation Hardware Included with Curt Class III Receiver for 2011 Chevy Equinox
    The Curt Class III Receiver Hitch, part # 13591, includes all necessary installation hardware. The 2010 and 2011 model year of the Equinox use the same hitches. If you were planning on using the hitch for towing purposes, we offer some additional products that you might need such as a ball mount, part # C45010, the wiring harness to provide lighting functions to the trailer part # 118494, a 2 inch trailer ball, part # 19247, or a 1-7/8 inch ball, part # 19260. I will include a link to...
    view full answer...
  • etrailer vs. Curt Hitch on a 2013 GMC Terrain
    In terms of quality both etrailer and Curt make very reliable trailer hitches and honestly neither is going to wilt under the elements in the northeast U.S. When choosing a hitch what people generally look at is capacity and, like you asked, if modifications are going to be made to their vehicle. The etrailer # e98865 and the Curt # 13591 are basically identical hitches except for their finishes. The Curt has a glossy black finish and the etrailer has a matte black finish which I think...
    view full answer...
  • Recommended Trailer Hitch for 2012 Chevrolet Equinox
    We have several Class II and Class III trailer hitches that are confirmed fits for your 2012 Chevy Equinox, but the Class I hitch you referenced, is not a fit. The closest hitch to the one you referenced is the Draw-Tite Class II trailer hitch with a 1-1/4 inch receiver # 36408. The hitch includes the ball mount and pin and clip. The wiring harness for your Equinox would be the Curt T-Connector Vehicle Wiring Harness, part # 118494. If you have the towing package you will want # 118264. For...
    view full answer...
  • Will Trailer Light Wiring for the 2011 Chevrolet Equinox Work Without Reprogramming the Computer
    The Tow Ready Custom Fit Vehicle Wiring, item # 118494, for the 2011 Chevrolet Equinox, will not affect the vehicle computer system. This is a powered converter that draws the power to activate the trailers stop, turn, and running lights from the vehicle battery. the connectors that plug inline with the vehicles tail light wiring only require a very small amount of power to signal the converter box to activate the correct signal. In this way the vehicle circuitry is not effected. We have...
    view full answer...
  • Recommended Trailer Hitch Receiver for a 2013 Chevrolet Equinox
    You are on the right track with the way that you are thinking. If you can install a 2 inch trailer hitch receiver on your vehicle then you have a higher weight capacity for your hitch and you have access to more accessories. In the case of your 2013 Chevrolet Equinox, you will want to install the etrailer Trailer Hitch Receiver # e98865. This hitch has a 2 inch receiver and has a Max Tongue weight of 350 lbs and a Max Gross Trailer Weight of 3,500 lbs. Be sure to check your owner's manual...
    view full answer...
  • Recommended 4-Way Trailer Connector for a 2015 GMC Terrain
    The color of the wires inside the vehicle connector will not always match the color of the wires inside the trailer connector. There is a standard wire color to function reference chart which I have attached for you, but this is not always the same on every vehicle. You will need to use a circuit tester like part # PTW2993 in order to determine wire function as this is the only sure-fire way to tell. In order to add a 4-way trailer connector to your 2015 GMC Terrain, you will want to...
    view full answer...
    Image 1 for
  • Trailer Hitch Receiver Recommendation For 2017 Chevy Equinox
    While there is a trailer hitch fit for your 2017 Chevy Equinox, the part you mentioned won't work because it is a fit for pickup trucks with step bumpers, which your Equinox does not have. So instead, I recommend a hitch from etrailer: - etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e98865 I really like this hitch for your Equinox because it is concealed but for the receiver, which will help ensure your Equinox keeps its clean look. This 2 inch hitch...
    view full answer...
  • Comparison of Trailer Wiring Harnesses for 2013 Chevrolet Equinox without the Factory Tow Package
    You're correct that both the Curt # 56094 and the Tekonsha # 118494 wiring harnesses are fits for your 2013 Chevrolet Equinox. There are 2 (Actually there's more than just those two) because they're versions of the same product made by differenct companies. The harnesses serve the same purpose: to provide a 4-way trailer connector to power the trailer's lights. However, like you pointed out, they aren't identical. The Tekonsha has the powered converter which connects directly to the...
    view full answer...
  • Fit and Installation of T-One 4-Pole Wiring Harness 118494 on 2013 GMC Terrain
    The T-One 4-Pole Wiring Harness Kit # 118494 is a confirmed fit for your 2013 GMC Terrain. This harness fits the 2010 through 2017 Terrain and also the same years of the Chevy Equinox. This harness will deliver stop, turn and tail light signals to a trailer or other 4-pole-equipped device, such as a lighted hitch cover like # CR-007G. Installation consists of plugging in the connectors at the vehicle tail lights, attaching a ground wire and running one single wire up to the engine compartment...
    view full answer...


< Previous
123. . .6



Do you have a question about this Custom Fit Vehicle Wiring?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Reno H
Expert Research:
Reno H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Zack K
Video Edited:
Zack K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Nicholas E
Test Fit:
Nicholas E
Employee Jared G
Test Fit:
Jared G
Employee Matthew S
Test Fit:
Matthew S
Employee Brent H
Test Fit:
Brent H
Employee Shane H
Test Fit:
Shane H
Employee Robert C
Test Fit:
Robert C
Employee Kathleen M
Video by:
Kathleen M
Employee Jonathan Y
Video by:
Jonathan Y
Employee Cole B
Installed by:
Cole B
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.