Recommended Wheel Tie-Downs For Securing a Jeep Wrangler To a Trailer For Towing

Question

Question:

Need part numbers for wheel nets and anchor points to fit 18 inch wheels on jeep. Anchor points mount in floor of trailer..Like to have two nets and all hard wear

asked by: Cecil A

0

Expert Reply:

I find using the Erickson E-Track Tie-Down Kit # EM58523-09162-4 makes for the simplest way to secure your 2019 Jeep Wrangler to a trailer. This kit provides you with 4 ratchets with roller idlers and 2 wheel chocks. It is designed to mount to etrailer Horizontal E-Track # e62VR which will also allow for different vehicle lengths and tire sizes to be used.

The etrailer E-Track Backing Plates w/ Hardware # e66RR allows you to mount them on surfaces up to 2" thick.

expert reply by: Bud M

0

Answer 1

Powder coating and galvanization are both about the same in terms of rust resistance. If you like the black of the part #e42VR it would work just as well as a galvanized version #e62VR.

view full answer...

Answer 2

E-track like the part #e62VR will easily handle being driven over. It will not crush the track. Since it's a wood floor application I would recommend the Snap Loc Etrack Wood Screws part #SL49FR. I would use a screw in every screw hole.

view full answer...

Answer 3

It looks like your strap will work with many car dollys. It will work with the Demco #DM9713045 and the Roadmaster #RM-2050-1 as well as the other options we carry. The 18 inch wheels may work with your strap but will not work with the Roadmaster…

view full answer...

Answer 4

We have the Bulldog Winch Ratcheting Wheel Tie-Down Strap for Extra-Wide Tire - Vertical Mount - 3,335 lbs #BDW20362 which is very similar to a wheel net and is compatible with diameters up to 37 inches. It is 9 inches wide so it won't fit…

view full answer...

Answer 5

The etrailer E-Track Roller Idler #e67HR is 3" from the top of the e-track to the bottom of the roller.

view full answer...

Answer 6

The Bulldog Winch Ratcheting Wheel Tie-Down Strap #BDW20362 is designed to connect to a D-Ring type of connection point so you wouldn't need to install an e-track on your trailer. For your application I recommend installing the Brophy D-Ring…

view full answer...

Answer 7

Yes we do have backing plates for the e-tracks. I recommend going with etrailer E-Track Backing Plates w/ Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 4 #e66RR which is a nice kit that includes 4 plates and all the necessary…

view full answer...

Answer 8

For your Dodge Challenger I recommend using the Erickson E-Track Tie-Down Kit #EM58523-09162-4. With this kit you get 4 e-track wheel straps that will provide you a great way of securing your Challenger. The straps will be easier to route around the…

view full answer...

Recommended Wheel Tie-Downs For Securing a Jeep Wrangler To a Trailer For Towing

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching