Brophy Slide In Camper Tie-Downs - No Drill Bed Mount - Qty 4
(218 reviews)
Price: $202.85
In Stock
Brophy Slide In Camper Tie-Downs - No Drill Bed Mount - Qty 4
Item # HSSF
Retail:$220.09
Our Price: $202.85
You Save: $17.24
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (218)
- Q & A (0)
- Photos
- Used (1)
Brophy Truck Camper Tie Downs - HSSF
- Bed-Mounted
- Front and Rear Tie-Downs
- Brophy
- Powder Coated Steel
Steel brackets clamp onto the side rails of your non-dually, full-size pickup with no drilling required. Creates a dependable anchor point for securing your lightweight camper to the bed. Simple to install and to remove.
Features:
- Creates attachment points for securing your camper to your truck bed
- Wide clamps provide superior holding strength
- Turnbuckles (sold separately) required to attach camper to tie-downs
- Protects your truck's paint with neoprene pads attached to the brackets
- Resists corrosion and rust with black powder coated steel
- Clamps securely onto your bed rails - no drilling required
- Includes 4 camper tie-downs with clamp plates, 12 neoprene pads, and installation hardware
- Made in the USA
Specs:
- Application: for exact fits, enter in your vehicle's year/make/model above
- Minimum 2" needed between sidewall and lip of bed rail
- Not compatible with drop-in bed liners, aftermarket bed rails, double-walled beds, or side-step beds
- Dimensions: see diagrams below
- 1-Year limited warranty
No-Drill Installation
These clamp-on tie-downs install quickly and easily, with no drilling or modification to your truck required. Because they're mounted in the bed instead of on the frame or body of your truck, you don't need any kind of fancy mechanical background to get this job done. You just need to slide the hold downs over the rails of your truck and clamp them down with the included T-bars and hex bolts.
The fact that they simply clamp on means that you can remove these tie-downs when you're not hauling your camper, leaving no trace. Use the provided neoprene pads on the T-bolts and tie-downs where they make contact with your truck to make sure no scratches or dents will be left behind either.
It's important that the tie-downs on your truck line up with the anchors on your camper at the correct angle to ensure a secure hold. Ideally the tie-downs should be on the outside of your camper's anchor points, but they can be on the inside as well, just as long as they're not lined up with each other.
Securing your Camper
To secure your camper to your truck, you'll also need a tie-down hardware package consisting of turnbuckles, S-hooks, and chains (TDHP - sold separately). This hardware attaches the anchors on your camper to the tie-downs on your truck to keep your camper safely mounted. Once you tighten the turnbuckles to the correct level of tension (not too tight!), you'll be good to hit the road.
HSSF CR Brophy Truck Camper Tie Downs for Slide In Truck Camper - Camper Hold Down - No Drill Tie Down - 4 Pack
Installation Details
Customer Satisfaction Score:
90% were satisfied with this product
10% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Brophy Slide In Camper Tie-Downs - No Drill Bed Mount - Qty 4 - HSSF
Average Customer Rating: 4.6 out of 5 stars (218 Customer Reviews)
Steel brackets clamp onto the side rails of your non-dually, full-size pickup with no drilling required. Creates a dependable anchor point for securing your lightweight camper to the bed. Simple to install and to remove.by: TheAvionNomad01/18/2024
I used these to mount a vintage 1970 Avion C-11 to a 1993 D250. They worked great and were much stronger than I expected - and it was a huge cost savings (and a much more attractive look) than some of the frame mounted options of more than $1000. There were some oddities that I noticed. It was impossible to mount them exactly the way the instructions suggested because of where on the wings near the cab,. The brackets also could not stay on with the camper unloaded because they would hit the jack mounts, meaning they had to me bolted in after the camper was in the truck but before lowering the jacks, making the access to the bolts a frustrating 'feel for it' experience.I'f suggest the manufacturer secure the bolt so that you don't need to hold both sides when tightening/loosening, and also refine it to need less turns to do so. It took me 2 hours to mount the first time, and not much less when removing them with the limited access. The pads also came off in the first use.
I gave it a 5 star because I realize there are limited options for older campers and anything universal is going to have issues with some thing - so that's just my input and experience. Overall pretty reasonable for the price and functionality.
by: Pat03/20/2023
The product was shipped extremely quickly, it arrived 3 days after I ordered them. As far as the product goes I was extremely pleased that they were as easy to install as the product video showed them to be. I had been looking for
a tie down system that would work for my 2018 Ford since I purchased my camper in 2020 and after much research I found these at etrailer. One word of advice is that if your camper has a shower or other design that allows the camper to extend across the bed behind the wheel wells, either move the rear tie downs forward or shorten the leveling stud before you attempt to load your camper. On mine it turned out that once the tie downs were placed and attached I had to cut off about 3 inches of the threads.
Other than that it was an easy install although the bolts that attach the tie downs to the under lip clamp are a challenge to install but take your time and they will go on. I will post an update once I have been on the road for a few trip and see how they are working.
Thank you etrailer for your super fast shipping and online product videos.
by: Ed B.05/21/2019
Purchased the Brophy camper tie down set of four for the Palomino truck camper I just purchased. These are my second set as the first set were sold with my Hallmark camper. Easy to install and hold the camper in the truck with no worries.
by: Jeff Smith10/22/2023
These tie downs work great. It holds my 3k lb Cabover camper in place without issues. And I live in my camper, so not losing my home is very important to me!!
by: James 05/20/2024
Ordered these for new camper. Very easy to install and does the job without the high cost of frame mount.
by: Shelly12/13/2023
The products arrived on the time scale as stated. The packaging did not hold up and the box with the metal tie downs was broken open. There was too much weight for the box and it just split open. Not sure if anything is missing. Packaging of items that are heavy should be more secure and sturdy.
Jenny N.
12/14/2023
Oh no! I will have our Customer Service team reach out to you. If anything is missing we can take care of it.
by: Ron W07/02/2016
As far as I'm concerned these are junk. Wasted my money. Do not mount in proper location on a 2011 Chevy Silverado 6.5' Bed. Because of the design of the bed rail the mounts cannot be installed in the proper locations for securing camper. The photos show the maximum forward and back that these can be mounted. Not at all made for the 6.5 foot bed 2007 or later Siverado. The Black Powder Coated Steel isn't that great either. Paint missing, dinged up from storage and shipping probably.
by: Allen.08/22/2022
These wont work for my truck and camper. The box on a 2018 gmc 2500 short bed does not lend well to placement of these in order to get the correct geometry i needed for the tie-down points on my Palomino maverick 6601. I had high hopews of not having to buy the frame mounts, but i will have to.
Mike L.
8/31/2022
The HSSF tie downs have specific fit parameters as mentioned in the product specifications above: External bed rail width cannot exceed 5-12 Requires at least 2 of space beneath lip of bed rail Not compatible with -in bed liners, bed rails, double-walled beds, or side-step beds
Allen.
8/23/2023
In response to the etrailer comment response, they fit on the bed fine, with plenty of clearance and would work for a smaller camper. they just did not fit in the right spots for my truckcamper combo.
by: . George01/03/2024
The tie downs are great no problems.Very easy to install.I keep them on my truck all year long Thank you
by: Terry08/08/2023
Order arrived quickly, priced ok. Box was broken open by shipper NS the 4 T-bolsts bolts ere missing. Etrailer shipped ou the missing parts a few days later, but in the meantime I fashioned t-bolts I could use for my trip. Many customer comments on this camper Brophy tie-down match my experience. Etrailer follow up was great, but surely must be aware that their packing is sub-standard. Perhaps zip-tying the T-bolts to larger pieces would eliminate the loss even in case of breakage. Functionally the tie-dows were easy to install and seem quite adequate for off-road use of my in-bed camper. Will continue to use etrailer because of their excellent customer service.
by: captkirk02/15/2021
These tie-downs worked awesome for our pop up camper on our 1998 F150. Super snug, haven't loosened up or moved on the truck, camper hasn't budged either. I was leary at first not having the camper tied to the frame but now I have total faith in these tie downs.
by: Mike S05/23/2020
These Brophy tie downs have worked great over the past year. I leave the camper on the truck and it is my daily driver as well as RV. The camper weighs in at 1500 dry and about 2000 loaded. I do not do any radical 4x4 but I have taken some backwoods off road logging trails.
by: Bing09/23/2019
I received this tie downs on July, and first used it yesterday.
My Camper ‘s dry weight is about 1600 lb, and the products are good for my truck camper.
The problem was the position where tie downs were fitted on my truck. I tried several times to fitted tie downs to my truck.
by: Brent 08/08/2019
I bought these for our brand new 2019 GMC Sierra 1/2 ton because no custom options were available. I was happy that they were easy to install, and look great. I’ve used them in the past and have been happy with how they hold campers. Sure I’d rather have custom mounts from the frame, but for the price and because these are my only option that’s what I got. These will work just fine, and I like that I can swap these out on trucks.
The one thing I wish was different was that the threaded T handle portion would have a longer option. I had to fancy up a 2”x6” to run inside the side of my p/u bed so they would touch something.
As always another great shopping experience with etrailer. They haven’t let me down yet. Especially Lori, what a great customer service rep.
by: Matt04/14/2015
These camper hold-downs appear to be manufactured from good steel stock and should do the job nicely. I did have one piece that was slightly damaged but was not caught when packaged (the damage was not due to shipping). I was able to take a hammer to the bent steel and straighten it sufficiently to use the part. It was a little disappointing however, and should have been caught prior to shipping.
Overall I am pleased with the quality and price
by: Regan06/25/2019
Using on 2013 Ford F150 for a smaller cabover. Great quality product, shipped fast, works great. Had to turn bolts around to clear inside of bed. Held camper solidly over rough trails!
by: Patrick04/02/2020
These things are solid although i put duck tape on the T pads....installed 2014 Chevy Silverado 6.5 ft bed for 1200lb Starcraft.
Patrick
4/6/2021
Still have not moved! Great design and cost savings.
by: Bryce05/10/2022
Fits well on a First Gen Tundra. I was extremely unsure about fitment for my truck but they work great! Install only takes 5-10 minutes. I would definitely recommend. Steel is quite thick and seems very strong.
by: John05/25/2020
Easy to install and have done what’s expected. Keep the camper in place!!
by: JAMES K09/24/2012
ORDER ON TUESDAY RECIEVED ON FRIDAY NOON SAME WEEK ONLY PROBLEM WAS 4 7/ 16 NUT WERE 4 1/2 NUT HAD TO BUY 4 NUTS OTHER THEN THAT I WOULD BUY OFF ETRAILER AGAIN VERY GOOD SERVICE
by: Neil08/04/2021
Arrived on a rainy day with the box falling apart. Too much heavy steel to be loosely packed. Fortunately, the hardware bag was still there. Some bare metal showing. I had some emails with MacKenzie B. and they were responsive and without asking they offered me a 5% refund for the damage. After my first trip, they performed well on some very bumpy roads. Held strong and didn't move. I did have to re-adjust the lower standoffs after the first week. Taking them on/off is frustrating because the 2 nuts are in the small gap behind the clamp against the inner bed wall. Too tight for all but an open end wrench. 1/6 turn times too many fumbling tries, arg! Also, I was nervous not having a locking feature (lock washer, locknut, etc). I bought 8 locknuts (pinch type) and welded them to the inner plate. Then bought 8 round head hex bolts (grade 8). So now I can install easily with an Allen socket. See pictures. Recommend eTrailer consider this modification.
Neil
8/5/2022
After my mount bolt mod, Ive used these multiple times and they are working great! Very stout and no visible marks on my F250 bed.
by: Chuck11/13/2012
Found easy to install, I placed lock washers on the 8 3/8" bolts. Sold at Menards for 89 cents (pkg of 8) not in kit. Placement was a little restrictive with dealer installed bed liner. Takes 30 minutes to install all 4. Great buy.
by: Jason S.06/05/2019
These tie downs were a great budget solution in leu of a permanent installation of my camper shell and/or frame mounted tie downs. Aside from needing to plan their placement (they can hang in front of the gas cap if you don't plan it right the first time around... no, I didn't accidentally block my gas cap... maybe I did) and take into consideration they also need a little bit of internal clearance as well, they work just fine. I haven't noticed any cargo shifting nor warping of the truck bed around where they are installed. My camper shell is under 1K lbs and it holds just fine.
Jason S.
6/8/2020
A year later & they still hold strong.
by: Dayton12/15/2023
Awesome customer service my new fav pl ace
by: dave07/08/2016
Its a good product for a light camper. I personally would not use it on anything heavier than 1000lbs. But then iam not an engineer. I sold mine and my camper and bought frame mounted tie downs
Dave
7/11/2017
Did not work for me. Tried to send them back but shipping would cost a bundle so i would get less than half of what i paid. Sold them same day on-line. Not good for a larger camper.
Rachael H.
7/12/2017
25
218
Show More Reviews
See what our Experts say about this Brophy Truck Camper Tie Downs
- Which Brophy Tie Downs Will Fit a 2002 Dodge Dakota? When we are unable to measure we recommend going with the larger Brophy Tie Down # HSSF which has a 5-7/16" measurement from the lip to the bend. The Zinc Plated # HSBP one you found has a 5" measurement from the lip to the bend. We have not attempted to fit these on a Dakota in our shop and Brophy builds these as a universal option and only has to do a redesign when the market changes which is why you see wider options since the rails have gotten wider on newer trucks.
view full answer... - Do Brophy Camper Tie Downs HSSF Fit 2015 Ram 2500Yes, the Camper Tie Downs part # HSSF that you referenced are a fit for your 2015 Ram 2500. You will also need the hardware kit part # TDHP to attach the tie downs to the camper.
view full answer... - Troubleshooting Too Much Play With Brophy Clamp On Camper Tie-Downs The Brophy Clamp On Camper Tie-Downs # HSSF will have a very slight amount of play since there is a compressible pad to prevent scratches on the bedrails, but it sounds like you're having much more significant play. I've attached a picture from an install of this part and you can see that the bolt is at its limit on threads. If you're seeing the same with your install then I recommend picking up longer T-Bolts with part # BR2007 to close the gap and tighten it down more to your bedrails.
view full answer...
- Recommended Clamp On Bed Mounted Camper Tie Downs for a 2001 Dodge Ram PickupFor a set of clamp on camper tie downs that have been confirmed to fit your 2001 Dodge Ram Pickup I recommend using the Brophy Clamp On Camper Tie-Downs part # HSAB. I have attached a photo for you on a truck from the same generation to show fit. The Brophy Clamp On Camper Tie-Downs part # HSSF should also fit but we have not yet tested this. It looks like you may need the angled lip to clear the bed sides so I do recommend using part # HSAB. The angled lip is the only difference between...
view full answer...
- Will Brophy Camper Tie Downs # HSSF Work With 2009 Dodge Ram 1500 Quad Cab 2WD TruckThe Brophy Camper Tie Down, part # HSSF is a universal fit item and will work on your 2009 Dodge Ram 1500 2WD Quad Cab. There is not a weight capacity for the hold downs, and will work with any camper that fits your truck. Part # HSSF works with trucks that have spray-in bedliners. If your truck has a drop-in bed liner, it will need to be trimmed or removed to use part # HSSF. The Brophy Tie Down mounts over the sidewall of the truck bed. The recommended hardware kit to install part #...
view full answer... - Difference Between The Brophy Camper Tie-Downs HSAB And HSSF The Brophy # HSAB and # HSSF are essentially the same thing with the exception that the # HSAB has a small bend in it to make connecting to your turnbuckles easier. If you're still needing turnbuckles you can use part # TDHP.
view full answer... - Camper Tie Down Recommendation for a 2013 Ram 3500The camper tie downs # HSSF fit most domestic pickups. The only exclusions are as follows: Will not fit step side beds or some double-wall beds Will not fit some Dually beds Will not fit some import trucks Will not fit 2004-2008 Ford F-150 Pickups They should be no problem on your 2013 Dodge Ram 3500HD Short Bed. I have linked a video and the instructions for the tie downs for you. I also recommend the hardware package to match the tie downs, # TDHP. The part # TDSF is not recommended...
view full answer... - In Need Of Camping Tie-Downs For My 2022 Ford F-450 The only tie-downs we offer to fit your 2022 Ford F-450 are by TorkLift. Unfortunately, I would need more information to get you setup with the correct fit. For example, if you have running boards, or a step underneath truck bed, and a Torklift SuperHitch Magnum 30K, you would need the following items: TorkLift Custom Frame-Mounted Camper Tie-Downs - Front, part # TLF2021 TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear, part # TLR3504 There are still some caveats. If you have factory...
view full answer... - Recommended Camper Tie-Downs for 1997 Toyota TacomaI do have a solution for you, however the TorkLift Custom Frame-Mounted Camper Tie-Downs # TLT2306 referenced in your question are designed for later model year Toyota Tacomas and will not fit your 1997 Tacoma. There are not any custom-fit camper tie downs available that are confirmed to fit your truck. For your 1997 Toyota Tacoma, I instead recommend looking at clamp on tie-downs like the Brophy # HSSF. These tie-downs are designed to fit the bed side rails on most trucks and will provide...
view full answer...
- Will Brophy Camper Hold Downs # HSSF Fit a 2011 Chevrolet Silverado Extended Cab, Long BedThe Brophy Camper Hold Downs, part # HSSF, will fit your 2011 Chevrolet Silverado extended cab, long bed as long as you do not have a slide-in bed liner. They will work with a spray-in bed liner. There is not a weight capacity rating for these hold downs and they are designed to work for any camper that is a correct fit for your vehicle. The hold downs do not fit in the stake pockets but wrap around the bed rails and are mounted inside the bed. If you are wanting to use a stake pocket...
view full answer... - Camper Tie-Downs for 2002 Ram with Truck Bed Camper of a Different SizeThe Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 # HSSF are not ideal if the camper won't be resting on them. The amount of torque if the camper is not resting on them may cause them to deform or the bed rail of your truck where they connect to have issues. If however the camper rests on the rails and is raised off the bed, that could be a different issue with all the weight on the rails. In that instance, the Brophy tie-downs will work well to secure...
view full answer... - Hardware Needed to Mount a Camper in the Bed of a 2002 Ford F-150To mount your camper in the bed of your 2002 Ford F-150, you can use the Brophy Camper Tie Downs, # TDSF, as long as your camper is not longer than 8 ft. These tie downs will install in the stake pockets on the top of your truck bed walls. If your camper is longer than 8 ft, then I recommend using the Brophy Camper Hold Downs, # HSSF. These hold downs will not install in your stake pockets, but clamp around the inside lip of the bed rail (see photo). The underside of the bed rail must...
view full answer...
- Will Brophy Camper Tie Downs # TDSF Fit a 1996 Ford F-150The Brophy Camper Tie Downs, part # TDSF, you have referenced are a universal application for full-size trucks and they will fit a 1996 Ford F-150. The hardware to mount the tie downs to the vehicle are included. These tie downs will fit campers up to 8 feet in length. If you have a larger camper I would recommend the Brophy Camper Tie Downs, part # HSSF which is a more heavy duty tie down. The tie downs wrap around the bed, not in the stake pockets, and are mounted inside the bed. They...
view full answer... - Camper Tie Downs for a 2007 Chevy Silverado Extended Cab 4x4The Camper Hold Downs, # HSSF, is a fairly universal kit and will fit your 2007 Chevy Silverado if it is not a step side bed, double wall bed, or a dually. You would use hardware package # TDHP also. Installation is not very difficult or involved as you can see in the installation instructions I have linked for you.
view full answer... - Will Brophy Clamp On Camper Tie-Downs # HSSF Fit a 2014 Nissan Titan King Cab?The Brophy Clamp On Camper Tie-Downs # HSSF are a great option for securing your camper to your truck. To make sure these tie-downs will fit your 2014 Nissan Titan, you need to take some measurements on your truck. First, measure the width of the top rails on your truck bed to make sure they are less than 5-1/2". Next, make sure you have at least 2" of space beneath the lip of the bed rail. Note that these are not compatible with drop-in bed liners, plastic bed rails, double-walled beds,...
view full answer... - Can Zinc Plated Brophy Tie-Downs be Used with Aluminum Bed on Ford PickupYou can use the Brophy Clamp On Camper Tie-Downs # HSBP with the aluminum bed on your Ford pickup but you would want to remove them frequently. If you are planning on keeping them installed for a long period of time then you will want to go with part # HSSF instead which is the exact same tie-down just with a black powder coat finish. The zinc plating on the steel will react with the aluminum a lot quicker than the black powder coat will wear off of the other tie-downs. If you will be...
view full answer...
- Will Brophy Camper Tie-Downs # HSSF Fit 2008 Tundra CrewMax 4x4 5-1/2 Ft Bed and Factory HitchThe Brophy Camper Tie-Downs, # HSSF, are designed to be a universal type fit and will work for most pick-up trucks. Unfortunately there is not a specific vehicle list that they will fit so you will have to go by the measurements of the tie downs and the installation instructions to determine if they will work for your 2008 Toyota Tundra. For a custom design that is confirmed to fit your Tundra, take a look at the TorkLift Custom Frame-Mounted Camper Tie-Downs, # TLT2307 and # TLT3304.
view full answer...
- Will the Camper Hold Downs Fit a 2013 GMC Sierra Long Bed and 1500 Pound CamperThe Camper Hold Downs, # HSSF, will fit your 2013 GMC Sierra provided that it is not a step side, does not have a double wall bed, and is not a dually. You are correct, these hold downs do not fit in the stake pockets, they wrap around the bed as you can see in the pictures below the description. I have also included the pictures here. I have also included a link to the installation details. Provided the camper fits the bed and carrying capacity of the truck the hold downs will accommodate...
view full answer...
- Camper Tie Downs for 2015 GMC Sierra Short Bed that Attach to Bed RailsFor a set of camper tie downs that attach to the bed of your 2015 GMC Sierra 1500 I recommend the # HSSF. These tie-downs use a clamp-on mounting system that grabs the underside of your bed rails. I have attached a photo that shows how this system is mounted on a truck. I have attached a link to an installation video for these tie-downs you can check out. If you decide on the # HSSF tie-downs you will need the Camper Tie Down Hardware Package, part # TDHP. This package includes the turn...
view full answer...
- Why are Frame Mounted Camper Tie Downs for 2018 Ford F-250 More ExpensiveBrophy has a stake pocket mounted tie down setup that fits your 2018 Ford F-250 short bed with the part # HSWB but the # HSSF you referenced is not listed as a fit. Stake pocket tie downs are more universal in the trucks they fit, are a simpler design, and not quite as secure as the frame mounted styles which is why the cost of them is lower. They work but in general people prefer the frame attachment style since it's a much more secure attachment as the frame of the truck is much stronger...
view full answer... - Is the HSSF or the TDSF Slide In Camper Tie Down a Fit for 2012 SilveradoAccording to CR Brophy, the TDSF camper tie-down you refer to is not compatible with GM trucks after the 1988 model year. My contact tells me that the HSSF tie downs are indeed compatible with a 2012 Silverado. If you look at the provided photo, you will get a better idea of how the tie downs attach to the top of the bed rail. The tie downs do not have a specified weight rating, but they are more than strong enough to handle any slide-in camper that will physically fit in your truck bed.
view full answer...
- Stake Pocket Camper Tie Downs for 2003 Toyota TundraFor stake pocket tie-downs that will work in your 2003 Toyota Tundra you will want the Brophy Clamp On Camper Tie-Downs # HSSF. These tie-downs are compatible with the turnbuckles # TDHP that you'd need to complete your camper tie down setup for your truck. This provides the connection from the tie down to the camper. I attached a review video for more info as well.
view full answer...
- How to Determine if the Brophy Clamp On Camper Tie-Downs # HSSF Will Fit a 2008 Chevy Silverado 2500The Brophy Clamp On Camper Tie-Downs # HSSF are actually a universal item so there isn't really a "fit guide" for which pickups that it fits. I did add some pictures of the dimensions as well as the installation instructions though so that you can compare what your 2008 Chevy Silverado 2500 bed side look like to determine a fit. If you find that these will not fit your Chevy just let me know and I can help you find one that will work for you.
view full answer...
- Will the Camper Hold Downs, # HSSF Fit a 1969 Ford F-250The Camper Hold Downs, # HSSF, are a universal fit item that will fit most full size trucks. This should include your 1969 Ford F-250. In order to be sure, take a look at the last 2 pictures on the product page. These pictures show the dimensions of the hold downs so you can compare them to your truck bed. I have also included a picture that is actually the instructions. You can click on it to make it larger. If you determine based on the dimensions and instructions that these hold downs...
view full answer...
Do you have a question about this Truck Camper Tie Down?
Used Items Available
Condition: Surface Scratches
Notes: Parts are scratched up, seems to be some signs of instalation, otherwise fine.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Brandon M
Expert Research:
Adam R
Expert Research:
Jeffrey L
Expert Research:
Sarah H
Video Edited:
Zack K
Video by:
Patrick B
Installed by:
Matthew K
Installed by:
Cole B
Updated by:
Rachael H
Updated by:
Amanda M
Updated by:
Manda E
Updated by:
Amanda K
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Ed B.
5/22/2020
No problems. Would buy again. Very easy to take on and off the truck.