Will Brophy Clamp On Camper Tie-Downs # HSSF Fit a 2014 Nissan Titan King Cab?

Question

Question:

will these work on a 2014 nissan titan king cab 6.5 ft bed

asked by: David C

0

Expert Reply:

The Brophy Clamp On Camper Tie-Downs # HSSF are a great option for securing your camper to your truck. To make sure these tie-downs will fit your 2014 Nissan Titan, you need to take some measurements on your truck. First, measure the width of the top rails on your truck bed to make sure they are less than 5-1/2". Next, make sure you have at least 2" of space beneath the lip of the bed rail.

Note that these are not compatible with drop-in bed liners, plastic bed rails, double-walled beds, or side-step beds.

Check out the video linked below for more details on this product.

expert reply by: John R

0

Answer 1

The correct Replacement Key for FIC Locks key number 336 is #GL48FR. If that is for the front door, you'll need to find the key code for the rear. The key code is sometimes on a sticker that is on the handle, or in some cases can be on a sticker…

view full answer...

Answer 2

Yes, the Happijac Qwik-Load turnbuckles are very similar to the Torklift Turnbuckles like the #TLS9529-2-LK so they would work fine.

view full answer...

Answer 3

If your Fan-Tastic Roof Vent is leaking it's going to be a sealant issue between the vent assembly and the roof of the trailer. So you'd need to have the base of the vent resealed to the roof with sealant like the part #34427034145-1 and that…

view full answer...

Answer 4

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 5

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 6

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 7

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Answer 8

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 9

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 10

To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…

view full answer...

Answer 11

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 12

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Will Brophy Clamp On Camper Tie-Downs # HSSF Fit a 2014 Nissan Titan King Cab?

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching