Brophy Slide In Camper Tie-Downs - No Drill Bed Mount - Qty 4
(218 reviews)
Price: $204.07
In Stock
Brophy Slide In Camper Tie-Downs - No Drill Bed Mount - Qty 4
Item # HSSF
Retail:$220.64
Our Price: $204.07
You Save: $16.57
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (218)
- Q & A (0)
- Photos
- Used (2)
Brophy Camper Tie-Downs - HSSF
- Front and Rear Tie-Downs
- Brophy
- Bed-Mounted
- Powder Coated Steel
Steel brackets clamp onto the side rails of your non-dually, full-size pickup with no drilling required. Creates a dependable anchor point for securing your lightweight camper to the bed. Simple to install and to remove.
Features:
- Creates attachment points for securing your camper to your truck bed
- Wide clamps provide superior holding strength
- Turnbuckles (sold separately) required to attach camper to tie-downs
- Protects your truck's paint with neoprene pads attached to the brackets
- Resists corrosion and rust with black powder coated steel
- Clamps securely onto your bed rails - no drilling required
- Includes 4 camper tie-downs with clamp plates, 12 neoprene pads, and installation hardware
- Made in the USA
Specs:
- Application: for exact fits, enter in your vehicle's year/make/model above
- Minimum 2" needed between sidewall and lip of bed rail
- Not compatible with drop-in bed liners, aftermarket bed rails, double-walled beds, or side-step beds
- Dimensions: see diagrams below
- 1-Year limited warranty
No-Drill Installation
These clamp-on tie-downs install quickly and easily, with no drilling or modification to your truck required. Because they're mounted in the bed instead of on the frame or body of your truck, you don't need any kind of fancy mechanical background to get this job done. You just need to slide the hold downs over the rails of your truck and clamp them down with the included T-bars and hex bolts.
The fact that they simply clamp on means that you can remove these tie-downs when you're not hauling your camper, leaving no trace. Use the provided neoprene pads on the T-bolts and tie-downs where they make contact with your truck to make sure no scratches or dents will be left behind either.
It's important that the tie-downs on your truck line up with the anchors on your camper at the correct angle to ensure a secure hold. Ideally the tie-downs should be on the outside of your camper's anchor points, but they can be on the inside as well, just as long as they're not lined up with each other.
Securing your Camper
To secure your camper to your truck, you'll also need a tie-down hardware package consisting of turnbuckles, S-hooks, and chains (TDHP - sold separately). This hardware attaches the anchors on your camper to the tie-downs on your truck to keep your camper safely mounted. Once you tighten the turnbuckles to the correct level of tension (not too tight!), you'll be good to hit the road.
HSSF CR Brophy Truck Camper Tie Downs for Slide In Truck Camper - Camper Hold Down - No Drill Tie Down - 4 Pack
Installation Details
Customer Satisfaction Score:
90% were satisfied with this product
10% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Brophy Slide In Camper Tie-Downs - No Drill Bed Mount - Qty 4 - HSSF
Average Customer Rating: 4.6 out of 5 stars (218 Customer Reviews)
Steel brackets clamp onto the side rails of your non-dually, full-size pickup with no drilling required. Creates a dependable anchor point for securing your lightweight camper to the bed. Simple to install and to remove.by: TheAvionNomad01/18/2024
I used these to mount a vintage 1970 Avion C-11 to a 1993 D250. They worked great and were much stronger than I expected - and it was a huge cost savings (and a much more attractive look) than some of the frame mounted options of more than $1000. There were some oddities that I noticed. It was impossible to mount them exactly the way the instructions suggested because of where on the wings near the cab,. The brackets also could not stay on with the camper unloaded because they would hit the jack mounts, meaning they had to me bolted in after the camper was in the truck but before lowering the jacks, making the access to the bolts a frustrating 'feel for it' experience.I'f suggest the manufacturer secure the bolt so that you don't need to hold both sides when tightening/loosening, and also refine it to need less turns to do so. It took me 2 hours to mount the first time, and not much less when removing them with the limited access. The pads also came off in the first use.
I gave it a 5 star because I realize there are limited options for older campers and anything universal is going to have issues with some thing - so that's just my input and experience. Overall pretty reasonable for the price and functionality.
by: Pat03/20/2023
The product was shipped extremely quickly, it arrived 3 days after I ordered them. As far as the product goes I was extremely pleased that they were as easy to install as the product video showed them to be. I had been looking for
a tie down system that would work for my 2018 Ford since I purchased my camper in 2020 and after much research I found these at etrailer. One word of advice is that if your camper has a shower or other design that allows the camper to extend across the bed behind the wheel wells, either move the rear tie downs forward or shorten the leveling stud before you attempt to load your camper. On mine it turned out that once the tie downs were placed and attached I had to cut off about 3 inches of the threads.
Other than that it was an easy install although the bolts that attach the tie downs to the under lip clamp are a challenge to install but take your time and they will go on. I will post an update once I have been on the road for a few trip and see how they are working.
Thank you etrailer for your super fast shipping and online product videos.
by: Ed B.05/21/2019
Purchased the Brophy camper tie down set of four for the Palomino truck camper I just purchased. These are my second set as the first set were sold with my Hallmark camper. Easy to install and hold the camper in the truck with no worries.
by: James 05/20/2024
Ordered these for new camper. Very easy to install and does the job without the high cost of frame mount.
by: Jeff Smith10/22/2023
These tie downs work great. It holds my 3k lb Cabover camper in place without issues. And I live in my camper, so not losing my home is very important to me!!
by: Shelly12/13/2023
The products arrived on the time scale as stated. The packaging did not hold up and the box with the metal tie downs was broken open. There was too much weight for the box and it just split open. Not sure if anything is missing. Packaging of items that are heavy should be more secure and sturdy.
Jenny N.
12/14/2023
Oh no! I will have our Customer Service team reach out to you. If anything is missing we can take care of it.
by: Ron W07/02/2016
As far as I'm concerned these are junk. Wasted my money. Do not mount in proper location on a 2011 Chevy Silverado 6.5' Bed. Because of the design of the bed rail the mounts cannot be installed in the proper locations for securing camper. The photos show the maximum forward and back that these can be mounted. Not at all made for the 6.5 foot bed 2007 or later Siverado. The Black Powder Coated Steel isn't that great either. Paint missing, dinged up from storage and shipping probably.
by: Allen.08/22/2022
These wont work for my truck and camper. The box on a 2018 gmc 2500 short bed does not lend well to placement of these in order to get the correct geometry i needed for the tie-down points on my Palomino maverick 6601. I had high hopews of not having to buy the frame mounts, but i will have to.
Mike L.
8/31/2022
The HSSF tie downs have specific fit parameters as mentioned in the product specifications above: External bed rail width cannot exceed 5-12 Requires at least 2 of space beneath lip of bed rail Not compatible with -in bed liners, bed rails, double-walled beds, or side-step beds
Allen.
8/23/2023
In response to the etrailer comment response, they fit on the bed fine, with plenty of clearance and would work for a smaller camper. they just did not fit in the right spots for my truckcamper combo.
by: . George01/03/2024
The tie downs are great no problems.Very easy to install.I keep them on my truck all year long Thank you
by: Terry08/08/2023
Order arrived quickly, priced ok. Box was broken open by shipper NS the 4 T-bolsts bolts ere missing. Etrailer shipped ou the missing parts a few days later, but in the meantime I fashioned t-bolts I could use for my trip. Many customer comments on this camper Brophy tie-down match my experience. Etrailer follow up was great, but surely must be aware that their packing is sub-standard. Perhaps zip-tying the T-bolts to larger pieces would eliminate the loss even in case of breakage. Functionally the tie-dows were easy to install and seem quite adequate for off-road use of my in-bed camper. Will continue to use etrailer because of their excellent customer service.
by: captkirk02/15/2021
These tie-downs worked awesome for our pop up camper on our 1998 F150. Super snug, haven't loosened up or moved on the truck, camper hasn't budged either. I was leary at first not having the camper tied to the frame but now I have total faith in these tie downs.
by: Mike S05/23/2020
These Brophy tie downs have worked great over the past year. I leave the camper on the truck and it is my daily driver as well as RV. The camper weighs in at 1500 dry and about 2000 loaded. I do not do any radical 4x4 but I have taken some backwoods off road logging trails.
by: Bing09/23/2019
I received this tie downs on July, and first used it yesterday.
My Camper ‘s dry weight is about 1600 lb, and the products are good for my truck camper.
The problem was the position where tie downs were fitted on my truck. I tried several times to fitted tie downs to my truck.
by: Brent 08/08/2019
I bought these for our brand new 2019 GMC Sierra 1/2 ton because no custom options were available. I was happy that they were easy to install, and look great. I’ve used them in the past and have been happy with how they hold campers. Sure I’d rather have custom mounts from the frame, but for the price and because these are my only option that’s what I got. These will work just fine, and I like that I can swap these out on trucks.
The one thing I wish was different was that the threaded T handle portion would have a longer option. I had to fancy up a 2”x6” to run inside the side of my p/u bed so they would touch something.
As always another great shopping experience with etrailer. They haven’t let me down yet. Especially Lori, what a great customer service rep.
by: Patrick04/02/2020
These things are solid although i put duck tape on the T pads....installed 2014 Chevy Silverado 6.5 ft bed for 1200lb Starcraft.
Patrick
4/6/2021
Still have not moved! Great design and cost savings.
by: Matt04/14/2015
These camper hold-downs appear to be manufactured from good steel stock and should do the job nicely. I did have one piece that was slightly damaged but was not caught when packaged (the damage was not due to shipping). I was able to take a hammer to the bent steel and straighten it sufficiently to use the part. It was a little disappointing however, and should have been caught prior to shipping.
Overall I am pleased with the quality and price
by: Regan06/25/2019
Using on 2013 Ford F150 for a smaller cabover. Great quality product, shipped fast, works great. Had to turn bolts around to clear inside of bed. Held camper solidly over rough trails!
by: Bryce05/10/2022
Fits well on a First Gen Tundra. I was extremely unsure about fitment for my truck but they work great! Install only takes 5-10 minutes. I would definitely recommend. Steel is quite thick and seems very strong.
by: John05/25/2020
Easy to install and have done what’s expected. Keep the camper in place!!
by: JAMES K09/24/2012
ORDER ON TUESDAY RECIEVED ON FRIDAY NOON SAME WEEK ONLY PROBLEM WAS 4 7/ 16 NUT WERE 4 1/2 NUT HAD TO BUY 4 NUTS OTHER THEN THAT I WOULD BUY OFF ETRAILER AGAIN VERY GOOD SERVICE
by: Chuck11/13/2012
Found easy to install, I placed lock washers on the 8 3/8" bolts. Sold at Menards for 89 cents (pkg of 8) not in kit. Placement was a little restrictive with dealer installed bed liner. Takes 30 minutes to install all 4. Great buy.
by: Neil08/04/2021
Arrived on a rainy day with the box falling apart. Too much heavy steel to be loosely packed. Fortunately, the hardware bag was still there. Some bare metal showing. I had some emails with MacKenzie B. and they were responsive and without asking they offered me a 5% refund for the damage. After my first trip, they performed well on some very bumpy roads. Held strong and didn't move. I did have to re-adjust the lower standoffs after the first week. Taking them on/off is frustrating because the 2 nuts are in the small gap behind the clamp against the inner bed wall. Too tight for all but an open end wrench. 1/6 turn times too many fumbling tries, arg! Also, I was nervous not having a locking feature (lock washer, locknut, etc). I bought 8 locknuts (pinch type) and welded them to the inner plate. Then bought 8 round head hex bolts (grade 8). So now I can install easily with an Allen socket. See pictures. Recommend eTrailer consider this modification.
Neil
8/5/2022
After my mount bolt mod, Ive used these multiple times and they are working great! Very stout and no visible marks on my F250 bed.
by: Jason S.06/05/2019
These tie downs were a great budget solution in leu of a permanent installation of my camper shell and/or frame mounted tie downs. Aside from needing to plan their placement (they can hang in front of the gas cap if you don't plan it right the first time around... no, I didn't accidentally block my gas cap... maybe I did) and take into consideration they also need a little bit of internal clearance as well, they work just fine. I haven't noticed any cargo shifting nor warping of the truck bed around where they are installed. My camper shell is under 1K lbs and it holds just fine.
Jason S.
6/8/2020
A year later & they still hold strong.
by: Dayton12/15/2023
Awesome customer service my new fav pl ace
by: dave07/08/2016
Its a good product for a light camper. I personally would not use it on anything heavier than 1000lbs. But then iam not an engineer. I sold mine and my camper and bought frame mounted tie downs
Dave
7/11/2017
Did not work for me. Tried to send them back but shipping would cost a bundle so i would get less than half of what i paid. Sold them same day on-line. Not good for a larger camper.
Rachael H.
7/12/2017
25
218
Show More Reviews
See what our Experts say about this Brophy Camper Tie-Downs
- Camper Tie Down Recommendation for 2013 RamYes, the stake pocket camper tie downs, # TDSF, will work on the 2013 Dodge Ram, as long as the overall length of the camper you are using them with is 8 feet long or less, this measurement includes the overhang over the cab of the truck. You will need to drill one 11/32 inch hole and two 7/32 inch holes for this installation, and there are spacer tabs on the tie downs that may need to be pried off for a proper fit in your stake pockets. If your truck campers overall length is longer...
view full answer... - Camper Tie Down Recommendation for 2015 Chevy Silverado 3500 with Wheel to Wheel Nerf BarsSince you have wheel to wheel step nerf bars the only solution for camper tie downs would be a Brophy kit like the part # HSSF which attaches to the stake pockets. The Torklift kits would interfere. Then for a hardware kit to attach the camper to the truck bed you would also need the part # TDHP.
view full answer... - Camper Tie-Downs for 2013 Ford F150According to CR Brophy, the TDSF is not a fit for your F150. They recommend using the # HSSF, which will work with your truck as long as there is two inches of clearance under the lip of the bedside, as shown in the provided diagram. Full dimensions of the TDSF are available in the thumbnail photos shown on the product page.
view full answer...
- Camper Tie Down Recommendation for a 1997 Ford F-350 DuallyYes, the Camper Hold Downs part # HSSF will work on your 1997 Ford F350. There is no weight capacity rating on the camper tie downs and they will work for any camper size that is properly sized for your vehicle. The weight capacity will be on the Brophy Camper Tie Down Hardware Package, part # TDHP that is used to attach the camper to the tie downs. The hardware package has a weight capacity of 3,000 lbs.
view full answer... - Recommended Camper Tie-Downs for 2009 Dodge Ram with 5-1/2 Foot BedThe Brophy Clamp On Camper Tie-Downs # HSSF referenced in your question are a universal item and designed to fit most full-size, non-dually pickup trucks. These will work great on your truck as long as there is two inches of clearance under the lip of the bedside. I have attached an image showing this dimension. The external bed rail width on your Ram 1500 can also not exceed 5-1/2 inches. These tie-downs will provide attachment points for securing your lightweight camper to your truck...
view full answer...
- Brophy Camper Tie Down Setup for 2002 Toyota TundraFor tie-downs that will work in your 2002 Toyota Tundra with a 6-1/2 foot bed you will want the Brophy Clamp On Camper Tie-Downs # HSSF. These tie-downs are compatible with the turnbuckles # TDHP that you'd need to complete your camper tie down setup for your truck.
view full answer...
- Camper Hold Down Recommendation for a 2011 Ford F-150The Brophy Camper Hold Down Brackets, part # HSSF are a universal-fit item that will work on most full-sized trucks, including your 2011 Ford F-150 as long as the camper is designed to fit on your truck. The brackets wrap around the bed rail, instead of using the stake pockets. The brackets include the hardware for fastening the bracket to the truck, but we also offer hardware to attach the camper to the brackets, the kit is part # TDHP. The kit includes 4 turnbuckles, 4 S hooks and 4...
view full answer... - Will the Camper Hold Downs, # HSSF Fit a 1975 Rancho El Rae and Ford F-250The Camper Hold Downs, # HSSF, will work with any camper that is a fit for your truck. These hold downs do have some limitations as to what trucks they will fit. If your truck bed is a step side or has a double wall, they will not fit. However it is likely that it will work for you. Take a look at the installation pictures I have included for you. I also recommend using the camper tie down hardware package, # TDHP.
view full answer...
- Camper Hold Down Availability for a 1989 Nissan HardbodyThe Camper Hold Downs, part number HSSF may work on your 1989 Nissan Hardbody. The hold downs do not fit in the stake pockets (which it doesn't look like you have) but wraps around the bed rails and are mounted inside the bed. There is no weight capacity rating on the hold downs and the will work for any camper size that is properly sized for your vehicle. I added a couple of dimension pictures of these hold-downs for you to compare to your truck bed to see if they will fit. I also added...
view full answer...
- Availability of Camper Tie Downs for 2012 Ram 3500 DuallyThe fit of the HSSF bracket will depend on the sidewall construction of your truck bed. Take a look at the provided photo. In the center panel, you can see that the bracket attaches under the lip of the truck bed, and the foot meets the inside of the truck bed in a raised area. My contact at CR Brophy, the manufacturer of the tie downs was unable to tell me if these particular tie downs would work with your truck. There might possibly be a Tork Lift system that would work for you. If you...
view full answer...
- Will Brophy Camper Tie Downs # HSSF Work With 2009 Dodge Ram 1500 Quad Cab 2WD TruckThe Brophy Camper Tie Down, part # HSSF is a universal fit item and will work on your 2009 Dodge Ram 1500 2WD Quad Cab. There is not a weight capacity for the hold downs, and will work with any camper that fits your truck. Part # HSSF works with trucks that have spray-in bedliners. If your truck has a drop-in bed liner, it will need to be trimmed or removed to use part # HSSF. The Brophy Tie Down mounts over the sidewall of the truck bed. The recommended hardware kit to install part #...
view full answer... - Camper Tie Down Recommendation for a 2015 Ford F-250The Brophy Camper Tie Downs, part # TDSF are a universal application for full-size trucks and they will fit a Ford F-250 Super Duty. The hardware to mount the tie downs to the vehicle is included. I would also recommend the Brophy Camper Tie Downs, part # HSSF which is a more heavy duty tie down. The tie downs wrap around the bed, not in the stake pockets, and are mounted inside the bed. They will not work with a slide-in bed liner. There is no weight capacity rating on the camper tie...
view full answer... - Camper Tie Down Recommendation for a 2011 Ford F-150 HSSF and TDSF ComparisonThe Brophy Camper Tie Downs, part # TDSF can be used on campers that have a total length of up to 8 feet in length. The Brophy Camper Tie Downs, part # HSSF can be used on any size campers. There is no weight capacity rating on the camper tie downs and they will work for any camper size that is properly sized for your 2011 Ford F-150. The Brophy # TDSF mounts into the truck bed stake pocket, where as the Brophy # HSSF tie downs wrap around the bed, not in the stake pockets, and are...
view full answer... - Camper Tie Down Recommendation for a 2006 Ford F-350 DuallyThe # HSSF should work well as a tie down system for your 2006 Ford F-350. But you may want to check out # TDSF to see which would work better for your application. I contacted our representative at Brophy about the differences between the Tie Down Anchor, part # TDSF, and the Camper Tie Down, part # HSSF. Part # TDSF can be used on campers that have a total length of up to 8 feet in length. Part # HSSF can be used on any size campers. Part # TDSF mounts into the stake pocket, where...
view full answer... - Camper Tie-Down Fit For 2007 Toyota TundraThe Brophy Camper Hold Down # HSSF is a more universal fit style camper tie-down. We unfortunately do not have test fit information on them, and have not had the chance to install them ourselves on a 2007 or same generation Toyota Tundra. We did have a customer purchase the # HSSF for his 2000 Tundra, and he did not have any issues with them fitting over the sidewall of his truck bed. The # HSSF comes with 4 camper tie-downs. We do offer custom fit camper tie-downs for your 2007 Toyota...
view full answer... - Will the Camper Hold Downs, # HSSF Fit a 1969 Ford F-250The Camper Hold Downs, # HSSF, are a universal fit item that will fit most full size trucks. This should include your 1969 Ford F-250. In order to be sure, take a look at the last 2 pictures on the product page. These pictures show the dimensions of the hold downs so you can compare them to your truck bed. I have also included a picture that is actually the instructions. You can click on it to make it larger. If you determine based on the dimensions and instructions that these hold downs...
view full answer...
- Do Brophy Camper Hold Downs Black Powder Coat, Part # HSSF, Stress Truck Bed Top Rails?The Brophy Camper Hold Downs, Part # HSSF, install without drilling and use the included padded T-bar hardware to evenly distribute forces downward and inward toward the inside of the truck bed. The top rail itself bears only some of the load from the tie-down points since most stress is distributed to the inside of the bed. I have attached the installation instructions for this item for your review. You will want to review this part for compatibility with your specific year/make/model...
view full answer... - Availability of Truck Camper Tie Downs for 2011 Dodge Ram 1500 with 5 foot 7 inch BedThe Tork Lift camper tie-downs we offer are all meant for the 6-1/2 foot bed, not the 5 foot 7 inch bed on your truck. CR Brophy offers the # HSSF which would work with your truck, as long as there is 2 inches of clearance under the bed lip as shown in the photo I provided. You'd also need the tie-down hardware package, part # TDHP. The HSSF would actually clamp to the underside of the lip on the bed side rail.
view full answer...
- Camper Tie Down Recommendation for a 2014 Ram 1500 with Running BoardsTorklift does not have a custom fit tie down for the front of your vehicle because of the running boards. Tie downs # HSSF are an option. I have included a link to the installation instructions plus a review video so you can determine if they would be compatible with your truck since there is no fit guide for these tie downs. You will also need the # TDHP.
view full answer... - Recommended Camper Tie Downs for a 2015 Chevrolet Silverado 1500 Out of all the Brophy Camper Tie Downs we carry, I recommend the Brophy Clamp On Camper Tie Downs # HSSF. I recommend these tie downs as they can fit beds with spray in liners and are the most popular Brophy Tie Downs we offer. To make sure these tie downs will fit your truck bed you will need to take a few measurements. The width of your bedrail cannot be larger than 5-1/2" and you need at least 2" of space beneath the lip of the bed rail. You also cannot have plastic bed rails, double-walled...
view full answer... - Will Stake pocket Mount Camper Tie Downs Fit a 2014 Chevy SilveradoThere are no stake pocket camper tie downs that we carry that will fit your 2014 Chevy Silverado. You would need to use # HSSF with hardware package # TDHP or you could use custom, frame-mounted tie downs. The custom tie downs are going to be the best option since they attach to the truck frame and not just the bed. To view the custom options I would need to know if the truck is a 1500, 2500, or 3500.
view full answer... - Brophy Camper Tie-Down Recommendation for a 2001 Dodge Ram 2500The Brophy camper tie downs are a great budget friendly option that would work well. The Brophy Camper Hold Down Brackets, part # HSSF are a universal-fit item that will work on most full-sized trucks, including your 2001 Ram 2500. The brackets wrap around the bed rail, instead of using the stake pockets. The brackets include the hardware for fastening the bracket to the truck, but we also offer hardware to attach the camper to the brackets, the kit is part # TDHP. The kit includes...
view full answer... - Camper Tie Downs for Lance Lite 1025 Camper on a 1986 Chevrolet 3500 Dually Crew CabThe Brophy Camper Hold Downs, part # HSSF are a universal fit item and will work on most full-sized trucks, but the bed of your 1986 Chevrolet 3500 Dually truck might interfere with the installation. They will not work with a slide-in bed liner. The hold downs do not fit in the stake pockets but wrap around the bed rails and are mounted inside the bed. There is no weight capacity rating on the hold downs and they will work for any camper size that is properly sized for your vehicle. The...
view full answer... - Camper Tie Down Recommendation for a 1992 Dodge DakotaThe Brophy camper tie downs # HSSF do not have a specific truck fit list, just some possible exclusions. They will not fit the following: Will not fit step side beds or some double-wall beds Will not fit some Dually beds Will not fit some import trucks Will not fit 2004-2008 Ford F-150 Pickups Your 1992 Dodge Dakota does not fit into these categories so you would look at the video review and instructions linked to the right and compare them to your truck bed to determine if they will...
view full answer...
Do you have a question about this Camper Tie-Down?
Used Items Available
Condition: Installed
Notes: Item has been installed/test fit.
Condition: Surface Scratches
Notes: Parts are scratched up, seems to be some signs of instalation, otherwise fine.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Brandon M
Expert Research:
Adam R
Expert Research:
Jeffrey L
Expert Research:
Sarah H
Video Edited:
Zack K
Video by:
Patrick B
Installed by:
Matthew K
Installed by:
Cole B
Updated by:
Rachael H
Updated by:
Amanda M
Updated by:
Manda E
Updated by:
Amanda K
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Ed B.
5/22/2020
No problems. Would buy again. Very easy to take on and off the truck.