Pop it into your hitch and tow - no assembly required! We designed this ball mount with 2 layers of rust protection and included a pre-torqued, black nickel-plated ball for a long-lasting hitch that looks great.
Features:
Specs:
Most ball mounts have just 1 layer of paint or powder coat to protect them from the outside world. Scratch this away after towing just a couple times, and the raw metal underneath will start to rust before you know it. Some folks take pride in that rusty, worn-in look. After all, rust is proof that you've had plenty of road-worn adventures.
But we prefer something that works hard and looks like it's barely broken a sweat. That's why we added a layer of e-coat underneath the matte black powder coat to give you an extra layer of rust protection. So while others might be driving around with a flaking, rusted-out hitch, yours will be looking great for the long haul.
Quick Tip: As for the hitch ball itself, if you really want to make sure that black nickel stays looking fresh for longer, we suggest greasing it up before you tow.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this etrailer Pre-Torqued Ball Mount for a two inch hitch receiver. Has a two inch diameter ball, offers a four inch drop or a two and three quarter inch rise and has a 7,500 pound gross towing weight capacity. Now this heavy duty ball mount will provide everything you need to embark on your towing journey with confidence. The ball mount itself will let you hook up your trailer to your tow vehicle. The shank right here is what'll slide into your vehicle's two inch hitch receiver and they do include this five eighths inch diameter pin and clip and that's designed to fit into the hitch pin hole when you slide this in your hitch receiver to secure it to your receiver, they include the pin and clip for that.
Now this ball mount does offer a four inch drop, like it is right there. And if you flip it over, change the ball around, it does offer a two and three quarter inch rise. And that measurement is measured from the top of the shank to the top of the ball platform. So you can see in the rise position, if you put a ruler on that, it's two and three quarter inch rise. If we flip it back over and measure the drop again, top of the ball platform, top of the shank, there's your four inch drop.
Now the two inch hitch ball right here provides the connection point for your trailer's coupler. As we mentioned, the ball is pre-torqued to the factory specs in the drop position. Now if you don't wanna remove this and put it in the rise, we do also sell this same ball mount with the ball torque in the rise position. And that's a part number E38NR. And we do sell that separately on our website.
Now this is a sturdy steel with rust resistant finishes. You can see the ball mount itself is a matte black powder coat over an e-coat. And then the ball is a nice looking black nickel plated hitch ball. And it's nice as the pin and clip they include is also matching black nickel finish on the pin and on the clip. Application is designed to slide into a two inch by two inch trailer hitch receiver.
Gross towing weight capacity, again is 7,500 pounds. Tongue weight capacity of 750 pounds. Again, ball diameter of two inches. And the last thing I wanna do is just give you the measurement from, the length of this ball mount goes from the center of the hitch pin hole to the center of the ball hole. So you can see if we hold a ruler on that, center to center, that's right at eight inches. But that should do it for the review on this etrailer Pre-Torqued Ball Mount for the two inch hitch receiver with the two inch diameter ball.
Average Customer Rating: 5.0 out of 5 stars (1 Customer Reviews)
Pop it into your hitch and tow - no assembly required! We designed this ball mount with 2 layers of rust protection and included a pre-torqued, black nickel-plated ball for a long-lasting hitch that looks great.
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.