The torque wrench with a 1/2" drive is a quick and easy way to tighten down nuts and bolts without overtightening. This wrench measures torque readings with the needle gauge from 0 to 140 ft-lb and from 0 to 20 meter-kilogram.
Features:
Specs:
To use a needle-type torque wrench, you must first know how much torque you wish to apply to your nut or bolt. Add your 1/2" socket on the end of your wrench and begin to slowly tighten the nut or bolt. Make sure nothing is in the way of the needle as it is gauging the amount of torque that is being applied. Once the needle reads your desired amount of torque, take the wrench off and apply the same amount to all surrounding nuts or bolts. This will build the correct tension all the way around your object for the safest results.
Average Customer Rating: 4.7 out of 5 stars (52 Customer Reviews)
Bought this to install a trailer hitch on my 2016 Acura MDX myself. It worked great to make sure the bolts were properly tightened. One suggestion is to make sure you have socket extension rods when using this to install a trailer hitch.
I got this to be sure the nuts/bolts on the hitch receiver are torqued down correctly.Works well for this and other stuff I have.Cant go wrong for the price.IMO these old school torque wrenches are better and more reliable than the other type.
Old school torque wrench with no batteries to replace. I love it! Works as advertised, E trailer never disappoints. Quality products and outstanding customer service. George J and Carol C always follow up and I appreciate that as a consumer. Keep up the good work and I’ll be a customer for life!
Great tires so far...customer service and shipping was great.
Just what I needed.Shipping was alot faster than I thought.Thank you
Good product, and inexpensive!
Used it once and already broke. The locking nut will not move
You sent it in a box large enough for my whole tool box. What a waste!
Total quality and extremely accurate and easy to adjust. My old one went right to the recycler after I put this one to work, primarily checking my tire dealer torques and my four wheel travel trailer lugs on a regular basis. I have run two Suburbans a total of 680,000 miles so maintenance checks are mandatory and I expect this tool will be riding along for many more.
Worked great and easy to use
This review is relevant to my purchase of this tool to aid in correctly solo-installing a Draw-Tite hitch on my new Mazda CX-5, with the wheels on the ground. If you're unfamiliar with torquing, then you would be surprised at how much force is required to set the mounting nuts on the cone washers to 75 ft-lbs. It would have been pure guesswork and nearly impossible to get that torque with a standard ratchet wrench. Even with the long lever arm of this wrench, you need to apply a solid 50 pounds of force from an awkward position under the vehicle. Hearing the solid "CLICK" at the set-point gave me confidence that I'd done it right.
The scale is a bit hard to read and doesn't line up exactly, so I knocked off 1 star.
Multi-drive size torque wrench was exactly the tool that I needed to install a suspension enhancement kit on my truck. Tool came in a nice package that protected it well during shipment. Worked great right out of the box.
Torque wrench is well made and gets the job done. I use the wrench for torquing the lug nuts on our RV to 120 PSI. In the past I quessed at the correct torque.
Well made torque wrench. Feels solid. Used it to install a new hitch on my 2018 Jeep Wrangler JL Rubicon. Handled the job well for 75lbs torque. Price feels right compared to similar ones elsewhere
Tork wrench worked great installing my new running boards.
Tried to use it at lower tension and could clearly hear a "click" telling me when to stop. At 86 foot-lbs that were recommended for my specific application, I could not hear a thing. I was afraid to apply too much force and just stopped as I was already using weight of my body.
I needed a torque wrench to properly put tension on my wheels/rims. This is a very sturdy wrench that was easy to use. This will do the job!
Worked perfectly to torque bolts to 76 pounds/foot while installing my draw-tire class III on my Honda Odyssey. The right tools make the job a lot easier.
It's a torque wrench...it works fine.
Great service to find the right part coupled with good instructions to install it!
The torque wrench performed as expected and delivered when expected.
Love the product and service. Recieved as shown. Use it often, before I travel. Works great.
Awesome tool to keep my tire lugs properly torqued.
Do you have a question about this Automotive Tool?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.