Torque Needed When Installing 12 Inch Trailer Brake Assemblies
Question:
What should the five nuts holding the brake assy be torqued to
asked by: Michael J
0
Expert Reply:
According to Dexter Axle, the attachment bolts for a 5-bolt brake assembly that is 12 inches in diameter should be torqued to 30-50 foot/lbs. If you need a torque wrench you'd also need the part # ALL644044.
expert reply by:
Jameson C
0
Products Referenced in This Question
Powerbuilt Beam-Type Torque Wrench - 1/2" Drive - 0 to 140 ft-lb
- Automotive Tools
- Wrenches
- Torque Wrench
- 140 ft/lbs
- 1/2 Inch Drive
- Powerbuilt
more information >
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 12 x 2 Inch Drum
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Wiring Diagrams
- Article: How Long Can You Boondock in an RV?
- Q&A: Seal With Dimensions to Replace 171255UC
- Q&A: Replacement Hub Recommendation for Dexter Hub 8-250
- Q&A: Replacement LED Top Command Clearance Light With SAE-AP2-16 On Lens For 2018 Sunseeker Motorhome
- Q&A: Hanger Spacing for 3500 LB. Tandem Axle Trailer
- Article: Trailer Tire Sizing
- Q&A: Adding Brakes to a Mobile Home Axle
- Q&A: Installation Information for the Replacement Cables for Enclosed Trailer Ramp Spring # ERS160D96
- Q&A: Hanger Spacing Dimensions for Installing Double-Eye Leaf Springs on a Trailer
- Article: Gooseneck Trailer Hitch Information and Review
- Article: What To Look For When Buying Ratchet Straps
- Article: Most Popular Wheel Bearings