Replacement Yakima 1A Raingutter Tower (QTY 1)
(55 reviews)
Price: $74.76
In Stock
Replacement Yakima 1A Raingutter Tower (QTY 1)
Item # Y8810137
Our Price: $74.76
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (55)
- Q & A (0)
- Videos (1)
- Photos
Yakima Accessories and Parts - Y8810137
- Roof Rack
- Tower Parts
- Towers
- Yakima
Replace one 1A Raingutter Tower for your vehicle's roof-rack system with this kit. Tower provides the base for your system, attaching to traditional rain gutters and holding crossbars (sold separately) in place.
Features:
- Clamp onto vehicle rain gutters
- Provide base for Yakima roof-rack crossbars
- Adjust to non-parallel rain gutters
- Are lockable with Same Key System (SKS) Cores (sold separately)
- Cores lock towers to vehicle roof
- SKS Cores can be changed out to make all your Yakima locks keyed alike
- Constructed from tough Zytel nylon
Specs:
- Quantity: 1
- SKS Cores required: 1
- Height: 7-1/4"
- Can be increased by 3-1/2" by 1A HiRise Spacers (Y01101), sold separately
8810137 Replacement Yakima 1A Raingutter Tower (QTY 1)
Video of Replacement Yakima 1A Raingutter Tower (QTY 1)
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Yakima Replacement Yakima 1A Raingutter Tower - Y8810137
Hello neighbors, Steve here with etrailer.com. Today we're looking at this replacement Yakima 1A rain gutter tower. Now folks, if you're watching this, more likely you're either replacing a worn out or broken part, or maybe you bought a used kit and you're missing a few parts and you need to get 'em, well, either way, we got you covered here at etrailer, this guy will clamp onto the vehicle rain gutter with the provided lip here that is adjustable. Once you tighten everything, it'll clamp on and it provides a nice base for the Yakima roof rack crossbars, and those will go through there. It does adjust to non-parallel rain gutters and it is lockable if you purchase the same key system or SKS cores, which are sold separately. Now with those cores, you can lock the towers to the vehicle's roof, so the attachment point here and everything will be locked where no one could get it on or off without a key.
Everything here is constructed from a tough Zytel nylon. Again, it's a height of seven and a quarter inches. And folks, you can purchase separately what's called 1A HiRise Spacers to then also increase the lift here that you're getting from the roof of your vehicle to the bar by another three and a half inches. That HiRise Spacer is sold separately and it's part number Y01101. Folks, that's gonna wrap it up for our look at this replacement Yakima 1A rain gutter tower.
I'm Steven, thanks for watching. Stay safe out there.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
Customer Reviews
Replacement Yakima 1A Raingutter Tower (QTY 1) - Y8810137
Average Customer Rating: 4.8 out of 5 stars (55 Customer Reviews)
Replace one 1A Raingutter Tower for your vehicle's roof-rack system with this kit. Tower provides the base for your system, attaching to traditional rain gutters and holding crossbars (sold separately) in place.by: Kj09/10/2017
I purchased a single Yakima 66" round cross bar and a pair of gutter mount towers.
The Yakima mega warrior cargo basket and cross bar set up I have was super easy to install, very user friendly. The extra cargo space is great,
Customer service at etrailer is great. Shipment of my order was slightly delayed. I was made aware of the shipping status by email consistently until I received the products. Answers to my questions we're prompt and courteous.
by: Bret C.03/22/2017
I bought this part to replace a broken Yakima Rack Tower on the family tent trailer. One of the towers has been broken for a couple years and finally gave out completely. After looking around, found this on etrailer.com, the price was right, so i ordered it. Part was delivered exactly when promised and it was exactly what I ordered (and needed!) Looked brand new to me and fit just as it should. I almost want to order 3 more now, as this one makes the other 3 look bad :-). I will certainly look to etrailer.com for any future camper needs!
by: Janice 09/21/2020
I needed this Yakima replacement tower for a trip. Etrailer had one in stock and got it to me super fast. I was able to fix the roof rack and hullavator! Thanks so much.
by: Brian T06/16/2017
Shipped quick. Direct swap out for my broken 1A Tower. Note: You must reuse the stud from original tower. This tower does not come complete and ready to bolt up. Not a big deal as long as you still have your old tower in hand.
by: Richard10/10/2018
Looks good now I just need a way to secure it with out the knob, and bolt.
Richard
10/11/2019
with my son in Washington state no complaints
by: Christopher05/19/2018
Great parts , and they were all the right parts , delivered to your door !
by: Rheal10/01/2023
by: Cory 08/12/2022
by: Sandy05/30/2022
by: Wayne 07/20/2021
by: Brad 02/26/2021
by: George 09/04/2021
by: steve Z06/16/2012
roof racks showed up in great condition, and showed up as one package.... I should have ordered the J racks from here but I found them cheaper locally so Thule J racks compliment the whole setup and i am just about ready to hit the water :)
by: Wayne 12/07/2023
As always E trailer handled my order extremely well. Kept me updated on shipping also. Very professional!
by: Todd04/06/2022
Thank again, etrailer. You always have what I’m looking for. I already had the bars, but I needed the towers.
by: Shaun05/16/2020
etrailer never disappoints! Every product I need, I check that etrailer has it before purchasing anywhere else. Thank you for the excellent service, the fast delivery, and the email updates on order status.
by: Keith05/10/2020
Fits awesome on my 2016 jeep unlimited. Some wind noise but not a problem.
by: Barry 02/20/2024
Fit the 79 Dodge van perfectly
by: John07/06/2020
I received the Rain gutter riser, 66' round bars, boat loader and SKS lock cores all well packaged and in good shape. These are for a 2020 Jeep Wrangler JLU Rubicon. The products were easy to install and will work great for loading and transporting my Hobie Outfitter Kayak. The Outfitter is a heavy kayak at 75 lbs unloaded. The Yakama Boat loader makes it easy for one person to load and unload the kayak. The rain gutter mounts and round bars securely hold the kayak for transportation. When not transporting the kayak the whole system quickly removes.
A big plus with ordering through etrailer is the excellent custom service, they will be my go to for future orders.
by: Blaine 09/19/2021
I chose the Yakima A1 raingutter towers for mounting a 96" Yakima crossbar for my Humvee wildfire rig rooftop gear rack. The towers are sturdy and able to handle the constant jarring expected in wild land fire fighting in rugged terrain.
by: Tom03/19/2023
These Yakima towers just work. They go on easily and stay tight. No issues whatsoever. They are a little pricey, but it's nice to have something that just works well without any drama.
by: Carl12/03/2019
Yakima rack arrived a day earlier than expected. All the parts were there instructions were clear took about half hour to install. The rack is a little noisy at highway speed. Darn, guess I'll have to take the back roads! Thumbs up to both etrailer and Yakima.
by: Steven02/24/2021
Awesome Company!
In the time of COVID doing business with this company was a great experience. I was kept informed by email by their CSR team as to when they would ship product and when it would arrive. Worked like a champ. Product fit my 1974 VW Baja as promised and now I can finally add the much needed Roof Rack System.
Thanks etrailer for being there and taking such care of your customers.
Steve
by: Richard 09/21/2021
I have used Yakima products for decades and never have had issues. Even now I still trust them thus still purchase their products. This was for a gift so spreading the product name and trust.
by: Jay F.12/21/2013
Did an excellent job guys. The Yakima towers arrived on time and in good shape. Mounted right up to the canopy clips, installed the existing bars, kayak racks, and lock cores without any issues. All is ship-shape now. Will definitely come back to you guys again.
Thanks!
25
55
Show More Reviews
See what our Experts say about this Yakima Accessories and Parts
- Replacement Yakima Towers for 2021 Jeep Wrangler Hard Top with Rain GuttersThe Replacement Yakima 1A Raingutter Tower # Y8810137 are the Yakima towers we carry that fit your 2021 Jeep Wrangler hard top with rain gutters. The whole system would be the Yakima 1A Raingutter Towers # Y00101 and use the Round 58" CrossBars for Yakima Roof Rack System # Y00409. The Replacement Yakima Q Tower without Cam Cover Assembly # Y8880048 provides the base on vehicles without rain gutters or factory racks so they would not be the correct part for your Jeep. If you know the...
view full answer... - Recommended Yakima Roof Rack with Additional Bar for 2004 Ford VanThe Yakima Round 66" CrossBars for Yakima Roof Rack System (QTY 2) # Y00410 and Yakima 1A Raingutter Towers (QTY 4) # Y00101. You can then add tower # Y8810137 (each) with bar # Y8810025 with end caps # Y8007026. Then I recommend using locks # Y07206 to secure your investment. You can see the total in your online cart.
view full answer... - Are Thule and Yakima Rain Gutters Basically the Same ThingThe reality is that both the Yakima and Thule artificial rain gutters were designed to mimic the same thing so they would work between each other. The rain gutters they tried to emulate is a universal design. So either the # TH542 or # Y08002 would work well.
view full answer... - Yakima 1A Raingutter Tower Fit On A 1995 Ford F-150The Yakima 1A Raingutter Towers (QTY 4) # Y00101 will fit your 1995 Ford F-150 per our own fitguide but I also referenced Yakima's assuming your F-150 was standard cab and long cab. The # Y8810137 is a single tower replacement and will also work great for you if you need less than the full set.
view full answer... - Parts Needed to Install 3-Crossbar Yakima Roof Rack on 1989 Toyota Land CruiserYes, you can use 2 of Yakima Replacement 1A Raingutter Tower # Y8810137 to add a third round crossbar # Y8810025 to the roof of your 1989 Toyota Land Cruiser. You will want to order the following items and quantities to get your 3-bar rack system. # Y00410 = 1 # Y00101 = 1 # Y8810137 = 2 # Y8810025 = 1 # Y8810136 = 1 These items will give you a total of three bars and six towers.
view full answer... - How to Pick Out Yakima Roof Rack for a Truck for a Crossbar on the Roof of Truck and One on CamperFor a set of Q-towers you would want the part # Y00124. The raingutter towers are sold individually so you would need a quantity of two of the part # Y8810137. For a pair of artificial rain gutters you would need the part # Y08002. Since I don't know the year of your Toyota Tacoma I can't really recommend a fit kit. So your best option would be to run your truck through our roof rack fit guide so that you can see what the correct fit kit would be for your vehicle. Also, the correct length...
view full answer... - Does the Single Replacement Yakima RainGutter Tower Come with the Knob and ScrewThe replacement Rain gutter tower # Y8810137 does not include the knob and screw. Yakima only makes them available in the hardware bag, # Y8810136, and not individually. The good news though is that with the hardware bag you will have some spare parts should you need them.
view full answer... - Availability of Replacement Yakima 1A Raingutter TowerYes we do offer the part you are looking for with the # Y8810137.
view full answer... - What Are Yakima Shear Blocks Y8810006 and Yakima Shear Block Bases Y8810007 Made Out OfThe Yakima Shear Block # Y8810006 you mentioned are made out of aluminum, and the Shear Block Bases # Y8810007 are made out of a tough Zytel nylon. You may be able to modify these to secure your Yakima round bars to the side of your trailer, but these towers were designed to attach to rain gutters like what you would find on some Jeeps. You may be able to modify these components to allow them attach to a flat surface but I do not have any information on what would need to be done. To...
view full answer... - Enclosed Ladder Rack Recommendation that Attaches to Rain GuttersWe sell a ladder rack that is designed to fit the gutters of an encloses cargo trailer like what you have. For that you'd want the Rack'Em part # RA-28 which is a confirmed fit and will work well. I attached an install video for this rack for you to check out as well.
view full answer...
- Replacement Parts for Yakima 1A Raingutter Roof Rack TowersIt sounds like you are talking about the shear block bases # Y8810007 for the Raingutter towers such as # Y8810137. This is a set of 4. Other replacement parts for the Yakima Raingutter 1A towers include: Boot set # Y8810008 Another shear block set # Y8810006 Hardware kit # Y8810136
view full answer... - Load Stop Brackets For Yakima Roof RackYou can use the LoadStop Brackets for Yakima RoundBar Crossbars # Y05000 on the Round 66" CrossBar for Yakima Roof-Rack System # Y8810025. You may also want the Replacement EndCaps for Yakima Round CrossBars # Y8007026. Depending on the style racks that are on your vehicle, you will need either Replacement Yakima Q Tower # Y8880047 or Replacement Yakima 1A Raingutter Tower # Y8810137 I have included a demonstration video for the loadstop brackets # Y05000.
view full answer... - Alternating Sides When Installing Yakima Raingutter Towers On 1987 Volkswagen VanagonOne problem that many folks have when installing a roof rack is that they will work on one side of the vehicle to tighten it down and then move to the other side only to find that they cannot get it to tighten up as they need. When installing the roof rack it is recommended to tighten each side evenly which means you will need to tighten one side a little and then move to the other side and tighten that side the same amount, alternating until the roof rack is secure, much like tightening...
view full answer... - Will Thule Artificial Rain Gutters # TH542 Work with Yakima 1A Raingutter Tower # Y8810137The Thule Artificial Rain Gutters # TH542 are roughly similar to the Yakima Side Loader Mounting Brackets for Yakima 1A Raingutter Towers, part # Y08002, but since neither Thule nor Yakima test or approve their own products for use with other manufacturers', compatibility is unknown. You will be better served using the Yakima Side Loader Mounting Brackets for Yakima 1A Raingutter Towers # Y08002.
view full answer... - How To Mount One Yakima Round Crossbar On a Camper ShellThe most cost effective option I have for you to install one Yakima Round Crossbar like part # Y8810023 on a camper shell will be with the following: Yakima 1A Raingutter Tower part # Y8810137 (2) Replacement Hardware Bag part # Y8810136 (1) Side Loader Mounting Brackets part # Y08002 (1) This will give you more parts than you will need but it is your only option as they don't offer all the hardware you need separately sold as a quantity of one or two.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Written by:
Tyler C
Expert Research:
Jameson C
Expert Research:
Adam R
Installed by:
Steven C
Updated by:
Wilson B
Updated by:
Brian T
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Kj
9/10/2018
Works great, keeps bulky stuff out of the living quarters while we’re on the road.