Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replace the step pad for your Westin Platinum Series 3" diameter, round step bar with this non-slip polymer pad. The UV-resistant material will not crack or fade. Barrel clips are included.
Features:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there, I'm Michael with etrailer.com. Today we're gonna take a quick look at this Westin replacement step pad. This is going to replace one step pad for your Westin Platinum Series three inch diameter round step bar. This is constructed of non-slip polymer plastic, so it is going to give you a nice, firm step surface, and that it's going to be UV resistant, so you're not gonna have to worry about it cracking or fading. And this will fit on the front or rear step pad area. They do include barrel clips to help get this installed, as well as instructions to walk you through that installation process.
Give you a few measurements here just to give you some extra reassurance. You can see this is 19 and three quarters of an inch long by approximately three and one eighth of an inch wide. But because this is a direct replacement from Westin, you can trust that it is going to fit with your Westin step bar. So, no worries about fit issues or compatibility problems or anything like that. We do have a graphic on our product page that will give you more measurements as far as the spacings for your studs here.
So, if you are needing that to verify that it's gonna work for you, we do have that available here at etrailer.com. So, that completes our look for today. Again, I'm Michael with etrailer.com. Thanks for watching.
Average Customer Rating: 4.7 out of 5 stars (119 Customer Reviews)
Replace the step pad for your Westin Platinum Series 3" diameter, round step bar with this non-slip polymer pad. The UV-resistant material will not crack or fade. Barrel clips are included.I have a Westin nerf bar and ordered the Nerf bar pads that fit perfectly and I am extremely pleased with the outcome.
did not fit properly. discription and and diagram measurements not accurate
Perfect fit and great price
I ordered 2 of the replacement step pads for my Westin nerf bars. After at least 11 years they 2 started to break free.
When my pads arrived, I installed the first with no problems. The second one seemed to have softer pegs and squished on install.
I contacted etrailer and the pad was replaced without any hassle at all. I installed that one and am very happy with the product and with etrailer and their superb customer service.
Joel C.
7/19/2017
Still solid and looks great
I'm happy to found this step replacements now me truck back to the road.
I had a little difficulty keeping the ends of the pads secure in the holes. They seemed not to hold sufficiently enough. Sometimes they would pop up and become loose. I finally got them all secure but I hope that they stay secure. No big thing I wasn't sure if the clips were the correct ones, but I finally was able to get them in the proper place.
Andy G.
10/29/2014
I installed the pads and everything was holding pretty good. Every once and while one will loosen on the ends but if I push hard or hit them with a hard rubber mallet they work for a while longer. Thanks for checking up on your product. Thanks again Andy Greer
I searched for a couple of years for the replacement pad. I was happy to find the pad. The quality of the product and the service of etrailer.com was excellent.
Olivia
6/16/2022
This pad fit perfectly and one year later delivers the same quality results.
Just what I needed
I was pleased with how easy it was to order and how quickly the product was delivered.
The one step pad installed with no challenges, however, on the second one the middle two pegs are squishy and move up and down when you step on it. I'm not sure if we need different/bigger barrel clips.
Heather A.
2/25/2019
I have contacted Westin and sometimes the holes can become elongated in the pad. If this is the case you will need to double clip the step pad on the hole that is no longer holding. You will need part # 60-0244.
Helpful Links
While the part is correct for my application, the fit is very poor. What you will find is that because the contour of the part does not match the contour of the running board, one of the fasteners will not hold and that side of the part will lift up. After a year I can say it is still frustrating trying to force the part into place only to have it pop back up. It is more than a cosmetic problem in that it can catch your foot on entry to the vehicle. It also allows water to get into the running board. There is not an alternative to this part and there is not a good way to 'fix' it. I guess the upside is that it kind of covers the area and mostly stays in place.
Item fit perfect,and took care of my problem.Will return, Thanks
etrailer.com service is the best you'll find anywhere! These pads replaced my Bully pads, but only after enlarging (drilling) the holes in the step bar. The packaging was good and shipping was fast.
Great choice, this fit perfect and cleaned up the look of the step bar also installed simple and fast.
I will be purchasing my truck accessories through you guys from now on.
Thanks for a great deal.
Dan R.
7/11/2014
Good morning back to you Patrick, In reply to you question, I like the product better then the original part and it is working good, I have your website saved in my truck folder in Favorites on my computer if and when I need other parts.Thanks for great products that are easy to install,look good and function flawlessly.Have a great day.
I had been to the dealer where I had my step bars installed and inquired about replacement steps. Four times over the course of a year, they said "they're just not available". Found etrailer.com, ordered the pads, and put them in...too easy! Thanks etrailer.com. I'll be back when I need other parts.
I was very pleased with the running board replacement step I purchased from etrailer. With my truck being over 10 years old I thought I was going to have to buy new running boards, but the replacement step fit perfectly.
Order arrived a day earlier than expected, and the service was fantastic as usual.
Greg
10/26/2017
I would like the Westin step pads better if the barrel clips would hold them down to the Nerf bars. It amazes me that i never had this problem with the original pads, only with the replacements. This is a Westin problem. The clips dont grip the pads good enough.
The two replacement pads went in so easy, fit so well and look better than the rest of my 2005 Tundra. The contrast is so bothersome to me that I am going to have it detailed for the first time.
I am looking forward to the total appearance improvement started by installing a couple of new step pads.
RCK, Missoula, MT
It seems that Westin doesn't make a great product. The step pads don't want to stay down on one end if the rest of the pad is down and in the barrel clips. Either both ends stay down and the middle bows, or the front three stay down but the back one comes up. I measured the existing step pads and they measure identical to the ones I received.
That being said, they were received quickly and the price was right. Westin may be junk, but I will definitely consider another purchase with etrailer.com.
GREAT CUSTOMER SERVICE.
HELPED ME FIND THE BEST REPLACEMENT STEP PAD FOR A DISCONTINUED STEP BAR.
GAVE ME GOOD ADVICE AS TO WHAT MIGHT FIT STEP BAR THE BEST.
SHIPPED IT TO ME SAME DAY I PLACED ORDER.
I RECOMMEND ETRAILER.COM FOR ALL THERE PRODUCTS
VERY PLEASANT PEOPLE TO DO BUSINESS WITH.
Product and packaging were excellent. But installation instructions were backwards. I followed directions for the first 2 pins, both of which failed to seat properly. Then I placed the little metal piece on the rubber pins before pushing them into the holes. That worked perfectly for the remaining 14 pins. The first two pins never did seat properly.
I needed a replacement step pad for our trucks step bar. I had a question regarding proper order number and eTrailer's customer service rep responded in a timely manner with the proper information. Additionally, the product arrived in less than a week, and fit perfectly. I will definitely order from them again!
After ordering from 2 other sites and getting the wrong barrel clips to install this pad etrailer delivered fast and had the correct hardware dont waste your time with universal parts etrailer had the exact factory replacement(BTW) when you install this place the clips in the holes and make sure you have all 4 anchors lined up and press down from front to back easy peasy!
First of all the FAQ helped me to figure out exactly which replacement step pads I needed for my Weston Platinum stepbars. Then the shipping cost was very reasonable and the entire purchase process could not have been more easy, smooth, efficient. My order arrived in a matter of days and I received immediate follow-up and shipping updates all along the way. I highly recommend etrailer to anyone and will purchase from them again.
Part (Westin step pad for a nerf bar) was easy to install... delivery was fast... l will definitely order parts again... l highly recommend.
The Westin Platinum Replacement foot pad fit my old 1996 Truck nerfbar perfectly. My old ones were starting to slowly come off and become dangerous. Ordering and shipping was quick. Thank you!
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
12/5/2023
I wanted to ask how the pads did not fit for you?