Replacement 20 x 3 Inch Replacement Step Bar Pads

Question

Question:

I have 3” bars need new pads 20x3”. Need 4peg. Distances from outer peg to inner 6 ish. Inner pegs are 6-1/2 ” between... can you help me

asked by: Bonnie G

0

Expert Reply:

Do you know the brand of step bars?

From your description, it sounds like you're needing the Westin replacement step pad, part # 25-0001.

The pad is just shy of 20 inches long by a little over 3 inches wide. The pin spacing is exactly what you described, so it might be worth checking out the photo I've provided showing the dimensions and measuring your existing peg spacing just to make sure you had an accurate measurement the first time. Our dimensions represent the distance from the CENTER of one pin to the CENTER of the adjacent pin.

expert reply by: Mike L

0

Dimensions of Westin 25-001 Replacement Step Pad
(click to enlarge)

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 3

Hey Jason, I spoke with Furrion and they stated that the Furrion Chill Cube is OEM only currently and should be released to the aftermarket distributors later on this year (2024), but there is no solid date. That says to me that they're probably…

view full answer...

Answer 4

I was not able to find a step pad with the matching dimensions that you've provided, unfortunately. The closest I was able to find to what you're looking for is the Replacement Step Pad for Westin Platinum Series Nerf Bars #26-0001 which…

view full answer...

Answer 5

The #25-0001 replacement pads are too short for your bars. The bars on your 2009 Hummer H3 are part #23-2865. So what you need instead is part #23-0001 for the correct step pad. It's 21 x 3 inches and has 5 posts. The 5 barrel clips are included…

view full answer...

Answer 6

I'm really not sure why they're so hard to find, but we do have a number of step pads that might work. It looks like the closest one we've got available is going to be the Replacement Step Pad for Westin Platinum Series Nerf Bars -…

view full answer...

Answer 7

The closest replacement pad we have to what your mentioned is the Replacement Step Pad for Westin Signature Series Nerf Bars - 19-3/4" Long - Qty 1 #26-0001. I have attached 2 photos of one of this replacement pad. One photo shows the outside…

view full answer...

Answer 8

We do have a 21x3 inch replacement pad. It is the Replacement Step Pad for Westin E-Series Nerf Bars - 21" Long x 3" Wide - Qty 1, #23-0001. Unfortunately this pad has 5 posts. The closest 4 post replacement pad we have is the Replacement…

view full answer...

Answer 9

The Replacement Step Pad for Aries 3" Wide Oval Nerf Bars #AA86FR measures 6.496” apart center-to-center for the inner pins, and the two outer pins measuring 17.795” apart center-to-center. It's not uncommon for replacement pads to fit from…

view full answer...

Answer 10

While we don't carry a hinge with the exact leaf setup as what you have pictured, the Replacement Controlled Motion Hinge for RV Entry Door - 6 Leaf - Black #LC95VR is still a viable replacement option. Since the leaf configuration is slightly…

view full answer...

Replacement 20 x 3 Inch Replacement Step Bar Pads

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching