Steel Band Kit for Tuson Tire Pressure Monitoring System Internal Sensor - 12"-17-1/2"

Video Transcript for Review of Tuson RV Brakes Tire Inflation and Repair - TPMS Sensor - TUS54FR

Michael: Hi there, I'm Michael with etrailer.com. Today, we're going to take a quick look at the steel band kit for your Tucson tire pressure monitoring system. This is going to attach to your Tucson's tire pressure monitoring system's sensor right here on the bracket, and that's going to fit onto your vehicle's tire. This is designed to work for when your wheel's valve stem diameter is not compatible with the Tucson's interchangeable valve stems. This will wrap around the inner rim of your wheel. It fits with a rim diameter from 12 inches to 17-and-a-half inches.

Our stainless steel cradle here, as I said, is where you'll mount your sensor. This is going to be looped into your band so that it's going to always be attached. But then on the backside there, it also has some 3M tape to attach to the rim so that it's not sliding along the band here.This kit is going to include one band, one cradle bracket, and screw there, that's going to attach your sensor to the bracket. So if you do have a wheel with a rim diameter from 12 to 17 and a half inches, and your wheel's valve stem diameter is not compatible with that Tucson interchangeable valve stem, this is going to be the piece that you'll need. Obviously, you'll need one for each tire that you're putting a sensor on.

But overall, I think this is going to be a great option for you to use that Tucson tire pressure monitoring system.There is another band that is a little bit larger, so if your wheel is a little bit bigger than that 17 and a half, the next one starts at 18. So that might be a better option for you if your tire rim diameter is larger than that.So that's going to complete our look for today. Again, I'm Michael with etrailer.com. Thanks for watching.