etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
(305 reviews)
Price: $169.93
In Stock
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
Item # e98905
Retail:$218.71
Our Price: $169.93
You Save: $48.78
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (305)
- Q & A (0)
- Photos
- Used (1)
etrailer Trailer Hitch - e98905
- Class III
- 2 Inch Hitch
- 6000 lbs GTW
- etrailer
- 900 lbs TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer
- Matte black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
- Made in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 6,000 lbs
- Maximum GTW when used with weight distribution: 8,000 lbs
- Maximum tongue weight: 900 lbs
- Maximum TW when used with weight distribution: 900 lbs
- Maximum gross trailer weight: 6,000 lbs
- Limited lifetime warranty
Rugged, Matte Black Finish
The sturdy steel construction is protected with a matte black finish for added durability. This unique powder coating gives etrailer hitches a carbide-like appearance and a rugged look that sets them apart from traditional glossy hitches. In addition to being rust and corrosion resistant, the tough matte coating hides dirt, scuffs, and dings better than a glossy finish.
etrailer Technical Support
At etrailer we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
e98905 etrailer Class 3 Trailer Hitch Receiver - 2" - Matte Black Carbide
Installation Details
This Product Fits The Following Vehicles
- 2016 - 2023 Toyota Tacoma
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" - e98905
Average Customer Rating: 4.8 out of 5 stars (305 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.by: Jim03/12/2024
2023 Toyota Tacoma
Great hitch. Well made!
After unboxing, I noticed an area where the matte black paint was rubbed off down to the base metal of the hitch. I cleaned this area and used black, metal rust proof spray paint and corrected it. The finished product is unnoticeable but more importantly, it won’t rust.
I’m going to paint the 2 bolts going into bumper black. It’ll give a cleaner look to the install.
Great product and I’m very satisfied with my purchase!
by: Mark 03/21/2024
Toyota Tacoma
This is my second receiver for a 2021 Tacoma from etrailer. Excellent quality and fit twice. The first Tacoma was a lease and I left it on the truck never thinking of purchasing a used 2021 Tacoma, the reason I purchased a second receiver. The two bolts you need to feed into the frame can be interesting, first went well second one not so easy.
by: Michael 03/26/2024
2023 Toyota Tacoma
This was an easy install. Watch the video. The trick for snaking the hitch bolts is key. That was the most time consuming part. I was able to complete the by myself, it would have been really easy with a second person and a lift but I improvised with a couple milk creates and clamps.
by: Jim 02/07/2024
Toyota Tacoma
Perfect fit and I installed it within an hour. Snaking the carriage bolts through the frame was a small challenge but patience pays off.
Like that the receiver part of the hitch is supported to the frame, my last Tacoma the receiver did not have this extra support. More heavy duty then the picture appears. Very pleased with purchase.
by: Linda02/25/2024
2021 Toyota Tacoma
The video makes it look like it's going to be difficult to do. I had it installed in 15 minutes. The most frustrating part was the bolts in the tube but if you get the right angle it goes in smooth. Quality is great.
by: Frank10/28/2023
The key to getting the fish bolts through the holes in the bumper, is to work the flat bolt retainer up at angle with a screwdriver through the hole it is going in as you pull the bolt through it. I spent an hour with retainer laying over hole and trying to get bolt to stand up and drop through. That won't work. Watch the video right before you attempt this and do it exactly like the guy in the video. You will definitely need a dead blow hammer. The hitch fits tight but I kept jack stands under it as I adjusted it to bolt it to the frame.
by: Cathi12/05/2023
2022 Toyota Tacoma
Took this to my garage peeps to install- they showed me how poorly it was designed with the fishing nuts and bolt provided. And I saw how useless it was when it was up on the rack. Other reviewers have mentioned this same issue.
As I don't intend to haul anything heavy like a trailer, it will be enough to hold my kayaks or bikes.
by: Phil01/30/2024
2023 Toyota Tacoma
Fast delivery.
It's good that you tape the hardware to the hitch because the box arrived with 2 large holes in it and if the hardware was in a loose package it probably would have fallen out of the box.
by: Terry 03/27/2024
Easily navigated website. Super fast delivery. Great product that looks and Fit like it came from the dealer! I will definitely use them again for anything trailer related.
by: John02/21/2024
2017 Toyota Tacoma
Was able to install it myself without much trouble fishing the bolts through was tricky was going to give up but watched the video and had to tilt the spacer just so great price
by: Michael 09/30/2023
The hitch was delivered as promised; installation instructions were concise, and install went well. I plan to have it help anchor rear bumper step, and provide protection to back of vehicle.
by: David 04/29/2024
Shipped faster than others and fit perfectly. It has to be pushed/pulled in between 2 vertical frame pieces (a tight/snug fit), so I couldn't do it alone without a jack -- used my neighbor instead and the 2 of us had no trouble bumping it into place.
by: Christian09/23/2023
Product is very good quality and it looks great.
I was able to install it myself (and with the help of a jack to keep the hitch in place while I put the screws in)
I had trouble with the fishwiring process initially. It has to be done in a very specific way or it won't work. My advice: Read the manual at least five times and just follow the exact instructions.
Overall, I highly recommend this product.
by: Harvey 02/21/2024
Ease of installation and works
by: Keith12/22/2023
Fits perfectly and installation was easy. Great option if your truck needs a hitch.
by: Scott 11/30/2023
2023 Toyota Tacoma
I had an extra hour today so I put it on truck. Heard horror stories about fishing the plate and bolt but did both in less than minutes.
Still need to torque the nuts but very happy with the product and install.
by: Robert 01/03/2024
2023 Toyota Tacoma
The tracking process is great. Came in at the date specified and received a follow up email. Great service!
by: Kim 11/06/2023
Toyota Tacoma
Ordered for my son's '22 Tacoma, easy installation and fit as advertised.
by: Don06/05/2022
Extremely difficult to fish/thread the two bolts through the frame. Other than that, I think the hitch is well constructed and will be great.
by: Eugene 12/27/2022
Just what I needed.
Eugene
12/28/2023
just fine, it was easy to put on and has worked out great.
by: Christopher09/03/2019
It was a tight fit but in the end it fit perfect! This thing is heavy duty too. I couldn't have purchased anything better. I recently purchased a universal reese hitch and it was not working out at all. Thanks etrailer for the perfect hitch receiver!
Christopher L.
9/4/2020
Awesome
by: Peter 04/13/2023
The trailer hitch receiver worked perfectly. the installation instructions were easy to follow, and the the trailer hitch is of excellent quality.
by: Jeff 03/06/2024
Placed the order and talked with a representative it was very helpful, received the order very quickly and everything was good. Thank you.
by: Nate05/25/2023
Hitch is nice but it didn't come with the hardware needed to mount it to my truck. I have messaged etrailer about sending me the hardware and they have been kind about their mistake, but its a bit of a PITA with a big trip planned in a couple days.
by: Colin 01/25/2024
Held up very well, no rust, no problems whatsoever
25
303
Show More Reviews
See what our Experts say about this etrailer Trailer Hitch
- How Much Does the etrailer Hitch for a 2021 Toyota Tacoma WeighThe etrailer Trailer Hitch Receiver part # e98905 which is a fit for a 2021 Toyota Tacoma weighs around 35 lbs.
view full answer... - What Does A Hitch Look Like On A 2023 Tacoma?Yes, here is a photo of our etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e98905 installed on a 2023 Toyota Tacoma.
view full answer... - What is the Maximum Tongue Weight of the etrailer.com Hitch e98905?Tongue weight has to do with the downward pressure being put on the hitch. With the etrailer.com hitch # e98905 having a maximum tongue weight of 900 pounds, it can technically handle a bike rack or cargo carrier combined with bikes or other gear weighing up to 900 pounds. However, hitches are typically rated higher than the vehicle and the maximum tongue weight of the vehicle should be checked before loading to this weight. This can easily be checked by looking at the inside door jamb...
view full answer... - Does etrailer Hitch e98905 Fit 2018 Toyota Tacoma 4 CylinderThe etrailer hitch part # e98905 that you referenced fits all models of the 2018 Toyota Tacoma including the 4 cylinder models so it would work great for you.
view full answer... - Does etrailer Hitch for 2022 Toyota Tacoma Come with Install Hardware and FishwireYes, the etrailer hitch part # e98905 for your 2022 Toyota Tacoma that you referenced does come with all needed hardware to install including the fishwire and bolts.
view full answer... - Availability Of Replacement Nut For etrailer Trailer Hitch Receiver e98905The nut you referenced for the etrailer Trailer Hitch Receiver # e98905 for your 2017 Toyota Tacoma is a grade 8 1/2"-13 hex flange nut. While we do not offer them by themselves, the are included in the Replacement Hardware Kit # RHK. All you will need to do is select etrailer from the drop down menu, and enter e98905 as the hitch item number.
view full answer...
- Replacement Mounting Hardware for etrailer Trailer Hitch on a 2022 Toyota TacomaTo replace the mounting hardware that comes with the etrailer Trailer Hitch Receiver # e98905 for your 2022 Toyota Tacoma you just need part # RHK. Add the hitch number prior to placing your purchase and you'll be good to go!
view full answer... - Hitch and Wiring that Will use the Factory 7 and 4 Way Plug on the Bumper for 2019 Toyota TacomaThe etrailer Trailer Hitch Receiver part # e98905 is a custom fit hitch for your 2019 Toyota Tacoma. It is easy to install and looks good when on the truck. As for wiring the Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter part # 22117 will work out well and allow you to use your already existing plug. It uses the standard factory type connector and will plug right in to the back of your plug.
view full answer... - Trailer Hitch Recommendation for 2018 Toyota Tacoma for Towing CamperFor your 2018 Toyota Tacoma the etrailer.com hitch part # E98905 is a really great choice and what I recommend for you to tow your camper. It has plenty of capacity, is easy to install without requiring drilling, and come with a limited lifetime warranty. For trailer wiring then we have the 7-way kit part # 22117 as a confirmed fit which will work great. It comes with everything needed to install. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900....
view full answer... - Difference Between Curt and etrailer Trailer Hitch for 2020 Toyota TacomaThe main difference between the Curt # C13264 and the etrailer # e98905 hitch receivers lies in the superior matte black powder coat finish of the etrailer hitch versus the traditional glossy finish of the Curt hitch. I recommend # e98905 because the matte finish will hide dirt, scuffs and dings better, and many people just like the more rugged look of the matte black finish. As you mentioned, they are both proudly made in the USA, they share the same towing capacities and can be used...
view full answer...
- How Can I Get The Most Payload Capacity Out Of My 2016 Toyota Tacoma?You are on the right track with calculating your payload. It sounds like you will be at about 875 lbs including fuel. There is no way to effectively increase your max payload rating. One suggestion I do have would be to install a trailer hitch like our etrailer Trailer Hitch Receiver # e98905. The hitch itself weighs only 35 lbs and is rated for up to 6,000 lbs towing. This should allow you to stay just under capacity. We are going to be pushing your truck near capacity, so anything we...
view full answer... - Hitch Recommendation for 2020 Toyota TacomaYou're correct, except for the fact that the # e98905 etrailer branded hitch uses a matte finish and the Curt # C13264 has a glossy finish, both hitches look alike and install in the same manner The Curt and etrailer brand have an identical 900 lbs tongue weight/6000 lbs towing capacity. The actual capacity of your truck will vary according to the engine, transmission and rear differential gearing, so you'll need to abide by whichever capacity is lower, be it the hitch or that of the vehicle...
view full answer... - Comparison of Curt and etrailer Brand Class III Hitch for 2022 Toyota TacomaThere are two differences between the Curt # C13264 and the etrailer # e98905 Class III hitch for the 2022 Toyota Tacoma. • The manufacturer's sticker • The powder coat finish applied to the hitch Curt manufactures the etrailer hitches for us. The only difference between the two is that the Curt hitch has a glossy powder coat finish, while the etrailer hitch has a matte finish. Other than the name on the sticker, this is the only difference. Both hitches are US made, both have the same...
view full answer... - Difference Between the Curt and etrailer Trailer Hitch for a 2022 Toyota TacomaThe main difference between the Curt # C13264 and the etrailer # e98905 hitch receivers lies in the matte black powder coat finish of the etrailer hitch versus the traditional glossy finish of the Curt hitch. I recommend the # e98905 because the matte finish will hide dirt, scuffs and dings better, and many people just like the more rugged look of the matte black finish better on their vehicle. Like you pointed out, they are both made in the USA, have the same towing capacities and bolt-on,...
view full answer...
- Replacement Fishwire for etrailer Hitch that Fits 2022 Toyota TacomaYes we do carry replacement fishwire for the 1/2 inch bolts of the etrailer hitch part # e98905 with the part # 80101-1 which is same size.
view full answer... - Will my 2021 Giant Talon1 Fit on a Thule Helium 1 Platform Bike Rack?The Thule Helium # TH44VR will accommodate the 2.40 inch width on your Giant Talon tires. Although, the Thule Helium fits a maximum wheel base of 50 inches and a wheel diameter of 26 inches - 29 inches. If you need a hitch for the Thule Helium, I recommend the etrailer Trailer Hitch Receiver - 2" # e98905.
view full answer...
- Recommended Trailer Hitch Receiver and 7-Way Trailer Connector For A 2020 Toyota TacomaA solid hitch option to get you started is the etrailer Trailer Hitch Receiver # e98905. This hitch provides your chain loops and a 2" receiver to provide a variety of accessories you can use like a bike or cargo carrier as well as for towing. The matte black finish resists corrosion and blends in well with the rear undercarriage of the Toyota Tundra. For the 7 way connector, the Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter - 7 Way Trailer Connector # 22117...
view full answer... - Trailer Hitch and Wiring Recommendation for 2021 Toyota TacomaYes, I recommend the etrailer Trailer Hitch Receiver, # e98905 for your 2021 Toyota Tacoma. This is a confirmed fit Class III hitch with a 2" receiver and rated for max trailer weight of 6,000 lbs. with a 900 lb. tongue weight. This fully welded trailer hitch receiver bolts onto your Toyota Tacoma's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look. If you need a wiring harness, I suggest the Curt T-Connector...
view full answer... - What is Difference Between Curt & etrailer Trailer Hitch For 2022 Toyota TacomaThe only difference between the Curt Trailer Hitch Receiver # C13264 and etrailer Trailer Hitch Receiver # e98905 for your 2022 Toyota Tacoma is the finish; apart from that, the two hitches have the same installation, capacities, and look. The best hitch for you really depends on the look you prefer for your '22 Tacoma. If you want the hitch to have a glossy finish, then the right hitch is the Curt Trailer Hitch Receiver # C13264. Of if you prefer a matte black finish then go with the...
view full answer... - Recommended 4-Way Trailer Wiring Harness for 2022 Toyota TacomaFor a 4-way wiring harness for your 2022 Toyota Tacoma I recommend the Tekonsha Curt Vehicle Wiring Harness # C56349. This wiring harness plugs into existing wiring located behind the tail lights and will give you the connection you need to power your trailer's signal lights. Should you decide to upgrade to a 7-way in the future, I recommend the Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat # ETBC7. This comes with everything you need to add a 7-way...
view full answer... - Differences in Curt and etrailer Hitches for a 2022 Toyota TacomaThe main difference between the Curt Trailer Hitch Receiver item # C13264 and the etrailer Trailer Hitch Receiver item # e98905 is the matte black powder coat finish of the etrailer hitch versus the traditional glossy finish of the Curt hitch. Other than that these hitches are identical. Both are custom fit and bolt directly to your 2022 Toyota Tacoma's frame with included hardware. I recommend the etrailer # e98905 hitch because the matte finish will hide dirt and paint chips better. I...
view full answer... - Replacement Fish Wire Bolt Leader For Curt Trailer HitchThe Curt Fish Wire Bolt Leader - 1/2 inch # C58400 is the correct fish wire needed to help install the Curt Hitch # C13264 on your 2022 Toyota Tacoma. I attached a review video link below.
view full answer... - Recommended Trailer Hitch Receiver and Wiring for 2022 Toyota TacomaFor your 2022 Toyota Tacoma I recommend the etrailer Trailer Hitch Receiver # e98905. This is a custom-fit Class III hitch with a 2" receiver. It features a matte black finish for a rugged look and corrosion resistance. It has a maximum gross trailer weight of 6,000 lbs, tongue weight of 900 lbs, and is compatible with weight distribution. This hitch is made in the USA. For wiring, I recommend the Curt T-Connector Vehicle Wiring Harness # C56349. This will provide you with a 4-way connection...
view full answer... - Parts Needed to Tow Trailer with Tractor Loaded with 2019 Toyota Tacoma The weight of a 1710 Ford tractor is very manageable for the towing products we offer for your 2019 Tacoma like the etrailer.com hitch part # e98905 which has a towing capacity of 6,000 lbs. Then to install a 7-way trailer connector for the wiring you'd need the kit part # 22117 and you'd be set. For a brake controller I'd recommend the Curt Echo Mobile part # C51180. Basically this just plugs into an active 7-way and once you sync it to your phone it's ready to go. This brake controller...
view full answer...
Do you have a question about this Trailer Hitch?
Used Items Available
Condition: Like New
Notes: May have damaged packaging or minor cosmetic blemishes.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Lindsey S
Video Edited:
Jacob T
Video Edited:
Chris R
Updated by:
Wilson B
Video by:
Jonathan Y
Video by:
John S
Written by:
Kristina F
Test Fit:
Aidan B
Test Fit:
Bradley B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Don S.
6/6/2023
Absolutely great. It will outlive me and my truck.