Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This wheel holder replaces a lost or damaged wheel holder for your Swagman G10 or E-Spec platform-style, hitch-mounted bike rack.
Features:
Fits:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there, I'm Michael with etrailer.com. Today we're gonna take a quick look at this Swagman replacement wheel holder and this is going to replace one lost or damaged right-hand side wheel holder for your Swagman G10 or E-Spec platform-style hitch mounted bike rack. If you do have any of the part numbers that you see on the screen there or model numbers, you can trust it is gonna be an exact replacement for you, so it's going to allow you to safely transport your bikes. Again, this does have a nice sturdy construction so it will be great for supporting your e-bikes and that sort of thing. You can see we do have the 1-3/16th inch by 1-3/16 inch opening there. That's going to allow this to slide over the horizontal arm on your bike rack and will adjust along the bar to accommodate different bicycle links.
So if you are needing to replace that original right-hand side wheel holder, this is gonna be exactly what you need. And that completes our look for today. Again, I'm Michael with etrailer.com. Thanks for watching.
Average Customer Rating: 4.7 out of 5 stars (32 Customer Reviews)
This wheel holder replaces a lost or damaged wheel holder for your Swagman G10 or E-Spec platform-style, hitch-mounted bike rack.G10’s fit a bike rack I manufactured for my Tacom truck bed utilizing the existing rail system
These are great wheel cradles, all metal construction, not plastic like some others I had considered. Not having a Swagman rack, and needing them for 2 recumbent trikes, I mounted them on my Adarac crossbars. Needing them just above the tonneau cover I used the Adarac end corners for the vertical bracket. The 1-1/4" aluminum thick wall tubes mounted 90°to the crossbars needed upper and lower mounting bolts for stability. I am very happy with the product.
I bought this to replace a part off my Thule bike rack that fell of and not only does this fit nicely it is much stouter than the original which is great hauling heavier E-bikes. Very happy, Fast shipping good service.
Thanks
Purchased replacement wheel holder for our Swagman G10 Bike rack. We couldn't be happier . Everything came together in one box and assembly was easy as pie ...took our Cannondale bikes out the same day for a 2 ride. Great customer service! We will definitely keep them on our speed dial.
Outstanding customer support received from etrailer while inquiring about the status of the package, as it took a couple of days to be prepared for shipping.
The package arrived to Canada in about 10 days. I am very happy with the product and recommend etrailer's services to everybody.
E trailers was out of stock when I ordered. They called me that evening to let me know. They said it would be no more than 2 weeks. The product arrived in 1 1/2 weeks and is fantastic. Great communication from e trailers was key to a great experience.
Brett B.
4/18/2015
The wheel holders are being used on a custom bike rack and they are still working well today. They were a great purchase. Thanks!
I do want to let you know that I was extremely satisfied with my experience with Etrailer, which exceeded expectations in every way. Even the part where the order was initially rejected because of a blip about the credit card information, to me that was an indication that client security and privacy is taken very seriously.
When I did call the place the order again, you acted in a most courteous, helpful and efficient manner to resolve the issue and reactivate the order. And the follow-up email was a considerate gesture as well.
In terms of delivery, suffice it to say that the product arrived 10 days BEFORE the promised date. Cool.
As for the product, well it's just fabulous. The replacement parts actually look better and seem to be built stronger than the original parts. And they fit perfectly. It took me all of 8 minutes to perform the installation.
Anything else? Oh yes, the personalized email asking me to review the experience. That was just the perfect final touch.
You're welcome to post these comments on your site.
We were looking for a bike rack that we could mount to the back of our travel trailer and support the weight of our two e-bikes. The G10 has proven to withstand all the jarring and vibration of road travel, and even though I improperly installed the wheel holders, we traveled several hundred miles before my error finally cost us one of the bikes. My judgement is the G10 is sturdy enough to do the job if it is properly installed. My bad.
These fit my Swagman Current Bike Rack but have a little front back wobble to them; I’ll have to test them out to see how they do. One of my original tire holders from Swagman was stolen, so I contacted Swagman for a replacement and found out they were out of stock. Swagman alleged they would have them back in stock by December 2021… then they didn’t… don’t hold your breath on Swagman original replacements. If you need one in the meantime, these will do and at a better price.
Buying new parts and piecing together an old bike rack, I think I have finally created a bike rack to hold my ebikes on the back of the fifth wheel.
This review is both for the part and the customer service that went along with the order. The part is just what we needed for our discontinued.Swagman G2 bike carrier. It is slightly different from the original in that a right and left carrier are specified and the original was universal. It was easy to install, fits perfectly, and is much appreciated. The customer service needs to be lauded also. The customer service rep we dealt with went above and beyond to make sure we got what we needed. Etrailer is definitely a company I would recommend.
THESE WORKED GREAT JUST WHAT I NEEDED
This product came as ordered. Company kept me updated as to receipt of order and shipping. Shipping was quick and package arrived in good order. My only con was the price of this item. I thought it should have been less costly as compared to the total cost of the complete bike rack.
Wheel holder for bike rack was exactly what was advertised. Arrived when it was supposed to.
This came up as a match for the Bell RightUp 350 but they don’t tighten down on the metal securely (too big)- I’ll figure out a way to rig them though
Jenny N.
6/11/2022
This wheel holder is intended to be used with the Swagman G10 platform-style, hitch-mounted bike rack. It has not been tested to fit other brank of bike racks.
Love these folk. Great stuff at very fair prices... with fast high quality shipping. Good stuff quickly - at a price I like. THANKS etrailer!
Fit my bike mount. Well made product.
They work excellent for my modified trike rack. A little long to wait to get them
The part was perfect. The expedited shipping was necessary
and timely but the cost was ridiculous!
Got it in the mail. Box was ripped at both ends, looked like it gone through a war. But contents ok. Thanks
Richard K.
5/6/2022
Very good
Package arrived before the estimated delivery date. Product is of original quality. Works as it should. Very helpful customer service which is a welcome change in the post covid error.
Just as described, fast shipping
Best ever
Do you have a question about this Accessories and Part?
Condition: Surface Scratches
Notes: Item has minor cosmetic scratches and scuffs. Otherwise new and unused.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Marius V.
12/18/2017
Thank you for following up with me. I have to say that i am very satisfied with my purchase and with the incredible customer support that I have received since the purchase.