Replacement Wheel Hoop for Older Swagman G2 Platform Style Bike Rack

Question

Question:

looking for a wheel loop for a swagman G2 bicycle rack. i broke one. i cannot see a direct replacement in your spare parts on line. can you help thankd

asked by: Eric

0

Expert Reply:

You can use the alternate replacement wheel hoops # G1020 and # G1025. These will also fit the older Swagman G2 bike rack that has been discontinued. Swagman confirmed compatibility for us.

expert reply by: Adam R

0

Answer 1

Based on your photo you provided, it looks like you have your current wheel holders installed backwards. The 'high' side of each holder should angle up towards the center mast of the bike rack, while yours appear to be the opposite.…

view full answer...

Answer 2

We have the following replacement parts available for your Swagman G10 bike rack. Replacement Wheel Strap for Swagman G10 and Quad 2+2 Bike Racks #SP494 Replacement Horizontal Cross Bar Set for Swagman G10 2-Bike Platform Rack #SG1030 Fat Tire…

view full answer...

Answer 3

The Replacement Wheel Holder for Swagman G10 Bike Rack - Left Side #G1020 and Right Side #G1025 both come with the actual wheel tray as well as the mount with the knob so nothing else is needed in order to mount it. These wheel holders are designed…

view full answer...

Answer 4

The replacement wheel hoop part #G1020 and #G1025 would also fit the older Swagman G2 bike rack that has been discontinued. I spoke to my contact at Swagman and he said if you need the replacement short hook you would need the part #SP428. This…

view full answer...

Answer 5

From the looks of your included photo, it looks like you have either the discontinued Swagman G10 model or the Swagman E-Spec #S94FR. If this is the rack you have, the part you need is the Replacement Wheel Holder for Swagman G10 Bike Rack - Left…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 8

There are some subtle difference between the Kuat Piston Pro Bike Rack for 2 Bikes #KU76ZR and the Kuat Piston Pro X Bike Rack for 2 Bikes #KU98VR. Overall the two racks are very similar, there are just some subtle differences/upgrades on the Piston…

view full answer...

Answer 9

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 10

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

I have the perfect bike rack for your Electra Townie and for this I recommend the Saris Freedom 2 Bike Platform Rack part #SA4412B. The reason I recommend this bike rack over the Malone rack is because you don't need to use an adapter bar at all.…

view full answer...