Replacement Rung for Stromberg Carlson RV Exterior and Bunk Ladders - Qty 1

Item # 8538-T

(7 Reviews)

Retail:$50.58

Our Price: $25.30

You Save: 50%

Add to cart

In Stock

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Stromberg Carlson Accessories and Parts - 8538-T

Stromberg Carlson Rung Accessories and Parts - 8538-T

8538-T - Rung Stromberg Carlson Accessories and Parts

Replacement Rung for Stromberg Carlson RV Exterior and Bunk Ladders - Qty 1 Rung 8538-T

Show All (5) Product Images

Show Fewer Product Images

Need help with installation?

Locate installers near me

Replaces 1 rung for your Stromberg Carlson exterior or bunk RV ladder. Fits Stromberg Carlson exterior RV ladder (LA-401) and Stromberg Carlson RV bunk ladders (LA-460 and LA-466). Includes 2 roll pins. 1-800-940-8924 to order Stromberg Carlson accessories and parts part number 8538-T or order online at etrailer.com. Free expert support on all Stromberg Carlson products. Great prices and Fastest Shipping for Replacement Rung for Stromberg Carlson RV Exterior and Bunk Ladders - Qty 1. Accessories and Parts reviews from real customers.

All Info
Reviews (7)
Q & A (0)
Related Parts
Photos

Stromberg Carlson Accessories and Parts - 8538-T

Features:

Replaces 1 rung for your Stromberg Carlson RV ladder
Fits Stromberg Carlson exterior RV ladder (LA-401) and Stromberg Carlson RV bunk ladders (LA-460 and LA-466)
Includes 1 rung and 2 roll pins

Fits:

Stromberg Carlson exterior RV ladder: LA-401
Stromberg Carlson RV bunk ladders: LA-460 and LA-466

8538-T Stromberg Carlson Replacement Rung for Exterior RV Ladders and RV Bunk Ladders - Qty 1

California residents: click here

Customer Satisfaction Score:

85% were satisfied with this product

15% of customers were not satisfied

Wrong item was ordered

15% of customers were not satisfied

Wrong item was ordered

Customer Reviews

Replacement Rung for Stromberg Carlson RV Exterior and Bunk Ladders - Qty 1 - 8538-T

Average Customer Rating: 4.9 out of 5 stars (7 Customer Reviews)

Order: Replaces 1 rung for your Stromberg Carlson exterior or bunk RV ladder. Fits Stromberg Carlson exterior RV ladder (LA-401) and Stromberg Carlson RV bunk ladders (LA-460 and LA-466). Includes 2 roll pins.

by: Philip 08/20/2021

Exact replacement but being used to add a step.

by: Dallas 10/20/2020

Ladder wrung was delivered very fast and was just what I ordered. Be forewarned, this wrung must be slipped over the railings, so it is best if you are replacing the top or bottom wrung. Be a little tough anywhere else as the ends are not open.

by: Michael06/16/2020

This was a replacement for one that i had damaged on a tree limb. It was a direct replacement and worked great.

by: Randy F.04/27/2014

Just the piece I needed. Will defiantly do the job I was looking for.

Randy F. One Year Later

4/29/2015

Still holding up just fine. I think it was the long term solution

by: Doug S11/30/2015

Excellent service

by: LW04/27/2017

Good price and very fast delivery. Than ks!!!

by: Kenneth 07/09/2022

See what our Experts say about this Stromberg Carlson Accessories and Parts

Do you have a question about this Accessories and Part?

What Does Roll Pin Look Like on Replacement Ladder Rung
If you take a look at the accompanying photo you can see the roll pins that come with the Replacement Aluminum Ladder Rung for Stromberg Carlson RV Ladders # 8538-T. This rung is designed to work with Stromberg Carlson RV Exterior Ladder # LA-401 as well as Stromberg Carlson RV Bunk Ladders # LA-460 and # LA-466.
view full answer...
Availability of Ladders and Ladder Parts for Keystone Cougar 5th Wheel Trailer
We do offer a range of interior and exterior ladder assemblies for 5th wheel trailers, such as the Stromberg Carlson RV Exterior Ladder # LA-401 which fits a straight wall. We also offer Surco ladder # SP501L which fits contoured trailer surfaces. These are all complete ladder assemblies. We also offer replacement parts for many of these products and these can be seen on the other link. For example, we have a replacement step (rung) for Stromberg Carlson RV Ladders, part # 8538-T.
view full answer...
Replacement Air Conditioner Shroud and Ladder Parts for an RV
We may have replacement parts available for you depending on the manufacturer and model of your ladder and AC unit. Stand-off nut # FST-9975 measures 1" x 1" and was designed for use with Stromberg Carlson ladder # LA-401. For a 5" ladder support leg, there is # 8535, which will work with any exterior RV ladder that has 1" round tubing, as well replacement ladder rung # 8538-T. When it comes to the shroud, the part which may work for you is # AT3308046006, which is a replacement white...
view full answer...
Tips on Driving a Roll Pin In or Out to Replace Ladder Rung 8538-T
If you have a center punch or a very thin screwdriver you could drive out the roll pins, or drive them in, using a hammer. You don't have to have any special tools unless you do not have anything that is no larger than the diameter of the roll pin.
view full answer...
Availability of Replacement Stand-Off Braces for Stromberg Carlson RV Ladder # 8538-T
We do indeed offer the stand off brace assembly as a separate part as part # 8535. The brace, the mounting bracket and the hardware is included. The brace assemblies are sold individually, so you would need to order a quantity of 4.
view full answer...
Installation Instructions for Replacement Rubber Tread for Stromberg Carlson RV Ladders # 8510-CP
I went out to our warehouse to grab the Replacement Rubber Tread for Ladder Rung on Stromberg Carlson RV Ladders, # 8510-CP. As you can see from the picture that I have attached, the rubber tread is cut on the back and will slip over the rung just as you suggested. As for a 1 inch thick replacement tread, the only replacement tread that we have available for the Stromberg ladders is part # 8538-T which measures 3/4 inch thick.
view full answer...
Will the Stromberg Carlson Replacement RV Ladder Rung Include the End Caps?
Good news! I was able to go out to the warehouse and see that the # 8538-T does include both end caps as well as the replacement step. I have linked the above product to this page for your convenience.
view full answer...
Rung Step Dimensions on Surco RV Bunk Ladder
The Surco RV Bunk Ladder # SP503B has rungs that measure 12-3/4 inches long with 10 inches in between the tubes and 2 inches wide but with the plastic covers 2-1/4 inches. There is 12 inches between the rungs.
view full answer...
Parts Included with the Stromberg Carlson Replacement Aluminum Ladder Rung # 8538-T
The Stromberg Carlson Replacement Aluminum Ladder Rung, # 8538-T, is a replacement rung for Stromberg Carlson RV Ladders. This replacement rung includes the black end caps and 2 roll pins to install the replacement rung on the ladder. We had one of these in stock, so I pulled the rung from our warehouse and made a short video for you.
view full answer...
Measurement Between the Holes Of The Replacement Aluminum RV Ladder Rung By Stromberg Carlson
The distance of the aluminum between the inner edge of the hole and the inner edge of the opposing hole is 10-19/32 inches.
view full answer...
Distance Between Holes on the Stromberg Carlson Replacement Aluminum Ladder Rung # 8538-T
I went to our warehouse and measured the hole diameter and hole spacing of the Stromberg Carlson Replacement Aluminum Ladder Rung # 8538-T. Each hole measures 15/16-inch in diameter and their center-to-center spacing is 11-1/16-inches.
view full answer...
Availability of Replacement Ladder Rung for RV Ladder
For a replacement run we have one option. We have the part # 8538-T which can fit RV ladders that have 1 inch diameter upright bars and a distance of 11 inches between them.
view full answer...
Dimensions of Stromberg Carlson Replacement Aluminum Ladder Rung 8538-T
I went to our warehouse and measured the hole diameter and hole spacing of the Stromberg Carlson Replacement Aluminum Ladder Rung # 8538-T. Each hole measures 15/16-inch in diameter and their center-to-center spacing is 11-1/16-inches.
view full answer...
Do You Carry Replacement Roll Pins For Stromberg Carlson Ladder Rungs?
The only roll pins for ladders we carry come with the Replacement Aluminum Ladder Rung for Stromberg Carlson RV Ladders - Qty 1 # 8538-T that you pointed out. If you are looking to change the spacing you may want to consider a new rack like the Stromberg Carlson RV Exterior Ladder w/ Hinges - Aluminum - 99-1/2" Tall x 12" Wide # LA-401 or the Surco Universal Exterior RV Ladder w Center Hinges for Contoured Rear Wall - 97" Long # SP501L.
view full answer...
Drilling Out the Roll Pins on the 8538-T Replacement Ladder Rung
In my experience if you are drifting from side to side when attempting to drill out the roll pin you should switch to a smaller bit. The drifting is occurring because the bit is not properly indexing the roll pin but instead sitting on top of it too much and not following the center of the pin. Start with a bit just barely larger than the center hole of the pin. Take out the first 1/32" of it and slowly go up 1/32" at a time this allows you to drill it out from the inside out and by the...
view full answer...

Do you have a question about this Accessories and Part?

Info for this part was:

Expert Research:

Jackie C

Expert Research:

Mike L

Expert Research:

Michael H

Expert Research:

Jameson C

Expert Research:

John H

Expert Research:

Adam R

Updated by:

Mary K

Updated by:

Wilson B

Updated by:

Mike S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.