What Does Roll Pin Look Like on Replacement Ladder Rung

Question

Question:

What does the roll pin look like

asked by: Jim J

0

Expert Reply:

If you take a look at the accompanying photo you can see the roll pins that come with the Replacement Aluminum Ladder Rung for Stromberg Carlson RV Ladders # 8538-T.

This rung is designed to work with Stromberg Carlson RV Exterior Ladder # LA-401 as well as Stromberg Carlson RV Bunk Ladders # LA-460 and # LA-466.

expert reply by: Kyle S

0

click to enlarge

Answer 1

I have attached a photo that has the dimensions noted for the Surco RV Bunk Ladder, part #SP503B. As noted, this ladder is 12 inches wide and 60 inches long.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 4

Thanks for reaching out, Michael! The Dexter Electric Trailer Brakes #K23-086-087-00 are compatible with 3,500 lb axles and have the standard 4-bolt pattern so if that matches the specs of your axle then this will definitely work for your…

view full answer...

Answer 5

We have a few different slide out rollers so I've listed them below so that you can measure your current roller and see if we have a compatible match. I've separated them by surface mount and recessed mount as well. Surface Mount: Global Link…

view full answer...

Answer 6

The Replacement Rung for Stromberg Carlson RV Exterior Ladder measures 13-1/4" overall length. The diameter of the hole is 1". From the center of one of the holes to the other hole is 11-1/4" and the measurement between the holes is…

view full answer...

Answer 7

I have a great recommendation for you. I recommend the Stromberg Carlson RV Exterior Ladder w/ Hinges, #LA-401 that is 99-1/2" and the add the Stromberg Carlson RV Ladder Extension, #LA-148. The Stromberg Carlson's universal RV ladder can be…

view full answer...

Answer 8

On the product Replacement Rung for Stromberg Carlson RV Exterior Ladder #8540-NT, ladder tube holes fit 1 inch round tubing. Distance of the step portion of the treads of the #8540-NT between the ladder tubing is 10.5 inches. See attached pictures…

view full answer...

Answer 9

As you noted, you can't have the propane supply going through two regulators as it would not supply the correct pressure that your griddle needs to function properly. It doesn't look like the the propane regulator on the 36-inch Blackstone…

view full answer...

Answer 10

Since your camper already has a quick disconnect, a propane grill hose like #100304-120-MBS is exactly what you'd need to connect to the 3/8 male flare fitting after the existing regulator and hose on your Blackstone Tailgator gas grill is…

view full answer...

Answer 11

The safety chains need to exceed the loaded weight of the trailer not the axle capacity. If the loaded weight of your trailer is significantly under 3500 lbs then a 3500 lb safety chain is fine. I have attached a link to all of the safety chains that…

view full answer...

Answer 12

The breakaway cable should be longer than the safety chains according to RVIA Recreational Vehicle Industry Association. This will activate the brakes in the event you lose the trailer connection and the safety chains fail which will bring the…

view full answer...