Availability of Replacement Stand-Off Braces for Stromberg Carlson RV Ladder # 8538-T

Question

Question:

i need 4 stand off braces ,all parts. can I order them by their self?

asked by: Robert T

0

Expert Reply:

We do indeed offer the stand off brace assembly as a separate part as part # 8535. The brace, the mounting bracket and the hardware is included. The brace assemblies are sold individually, so you would need to order a quantity of 4.

expert reply by: Mike L

0

Answer 1

We do offer a range of RV exterior ladders that are general-purpose replacements that will work on many trailers and RVs, but none of these is a custom-fit item intended as an exact OEM replacement for any particular unit. RV makers may change ladder…

view full answer...

Answer 2

We do have replacement support pegs available for RV exterior ladders, which I have linked for you to look through. In order to choose a compatible replacement, you will want to measure the length of your existing units. For 5 inch support pegs, we…

view full answer...

Answer 3

The Replacement Rung for Stromberg Carlson RV Exterior Ladder measures 13-1/4" overall length. The diameter of the hole is 1". From the center of one of the holes to the other hole is 11-1/4" and the measurement between the holes is…

view full answer...

Answer 4

I went out into our warehouse and measured the Replacement Ladder Support Peg #8535 and found that it measures 4-7/8 inches from the base to the black portion of the peg. If you could come up with a spacer that's a little bit wider than 1/2 of an…

view full answer...

Answer 5

On the product Replacement Rung for Stromberg Carlson RV Exterior Ladder #8540-NT, ladder tube holes fit 1 inch round tubing. Distance of the step portion of the treads of the #8540-NT between the ladder tubing is 10.5 inches. See attached pictures…

view full answer...

Answer 6

Since you need the Replacement Control Unit for Kwikee 38 Series Electric RV Steps #LC363989 I'm assuming you have 38 series steps on your 2017 Thor Windsport. The correct replacement motor for these steps would be the #LC379147.

view full answer...

Answer 7

The correct step controller to replace the Kwikee part 1800709 on your 2017 Thor Windsport is part #LC363989, the item you referenced. I confirmed this item with my contacts at Lippert Components.

view full answer...

Answer 8

Since your Georgie Boy Pursuit is a 2008 model, you will need the Lippert Components Kwikee Motor and Screws for New IMGL Step #LC379147. The motors changed from October to November of 2005, so you can rest assured it is the correct replacement.

view full answer...

Answer 9

There are indeed many different replacement step controllers out there and I am happy to re-confirm that the correct current item to replace your Kwikee step controller 1800709 is part #LC363989. I verified this item with my parts contacts at…

view full answer...

Answer 10

We do have the correct replacement controller for the Kwikee 1800709 you have. What you need is the Replacement Control Unit #LC363989.

view full answer...

Answer 11

For an RV ladder that has a hinge half way up the ladder we have the Stromberg Carlson #LA-401 which would work well for you. The hinge allows the lower portion to fold like you are wanting so that it can match an angled RV wall like in the picture I…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Availability of Replacement Stand-Off Braces for Stromberg Carlson RV Ladder # 8538-T

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching