Raised Ball Attachment for Shocker Bumper Hitches with 2-5/16" - 20K

Video Transcript for Shocker Hitch Raised 2-5/16" Ball Attachment Review

What's up, everybody It's AJ with etrailer.com. Today we're gonna be checking out this Shocker Hitch accessory. It's gonna give you a two inch rise, with a two and five 16ths inch ball. Let's check it out. Wanted to show you what the standard two ball set up here on the Shocker Hitch XRC. This is going to be as high up as it's gonna get.

So, you wanna swap out and get this accessory, to get that two inches of extra height. So, we can just pull the pins just like we usually do to flip this around, or move it and adjust heights. Hold it up, put our pins in. And once you add your clips, you're good to go and you have that two extra inches. The accessory is gonna work with the Ahocker Air, XR, XRC, and the Impact Series of ball mounts.

There's some things I wanted to point out, is it is gonna come with the two and five 16ths inch ball, the nut and lock washer. Make sure you torque it down to the recommended specifications. And this is gonna have a setup to where you can get a wrench here on the flat size of the ball to help tighten it down when you torque it down. This is also gonna help hold it in place down here, as well. This does have a gross trailer weight rating of 20,000 pounds.

It's gonna have a tongue weight rating of 2000 pounds. It's also made out of a cold rolled black powder coat steel. This section is here, and then it's got the zinc plated ball up here. Overall, I like that it's a simple accessory that you can put right in there with the same pins you usually do to a ball set up. I don't have to buy a whole new assembly or a second part.

I just get this. This takes up less space in the back of the truck, and I can swap it out when I need it really easily and get on the road. I think that does it. Thanks for hanging out, and I hope this helped.