Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replace your standard equalizers with these shock-absorbing E-Z Flex units to get a smooth ride for your tandem-axle trailer. Equalizers with rubber cores absorb road shock for a smooth ride. Heavy-duty shackle straps ensure strength. Includes bolts.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at the replacement 5 5/8 inch equalizers for the Dexter Axle E-Z Flex Heavy-Duty Rubber Suspension System. Now, these parts here will replace a damaged or worn out rubber equalizer on your Dexter E-Z Flex Heavy-Duty Rubber Suspension System. That system we do sell separately on our website, and it's part number K71-652-00. As you can see, this is for a quantity of two replacement equalizers, the bolts, the nuts, and some grease packets. Now, the rubber cores on these will isolate and absorb any damage and road shocks before they hit the trailer frame and the contents.
If you noticed on the very top of these, there's two grease zerk fittings that allow for easy lubrication of your bolt through here, you just attach your grease gun to there and pump the grease in there. And these are very easy installation, there's no welding, cutting, or grinding required. Capacity again, this is for tandem axle applications up to 6,000 pound axles with 33 inch spacing. This does replace the Dexter standard equalizer, which is part number 13-104, and just to give you a few measurements on these, if we take our ruler and if we measure from the center of this bolt eye to the center of the other one is about 5 5/8 inches, and it does have a range, since there's a rubber insert in there, it'll allow this to have a range of a minimum from 5 1/4 inches up to 6 1/4 inches. And then the last measurement, we're gonna measure from this center of this top bolt hole to the center of these two lower bolt holes, so if we do go on that, you can see it's gonna be right at about two inches.
But that should do it for the review on the replacement 5 5/8 inch equalizers for your Dexter Axle E-Z Flex Heavy-Duty Rubber Suspension System..
Average Customer Rating: 4.9 out of 5 stars (14 Customer Reviews)
Replace your standard equalizers with these shock-absorbing E-Z Flex units to get a smooth ride for your tandem-axle trailer. Equalizers with rubber cores absorb road shock for a smooth ride. Heavy-duty shackle straps ensure strength. Includes bolts.
I’m totally satisfied with these equalizers. I installed these and a set of Roadmaster Comfort Ride Shock Absorbers to my travel trailer because I was worried that something was going to get broken on my trailer because of the harsh ride it was going through on the rough roads we drive on. I knew the ride was harsh when I was opening the trailer door and finding everything that wasn’t attached turned upside down or on the opposite end of the trailer and some attached items torn loose. On one trip the fire extinguisher screws came out of the wall, another trip the screws holding the dinette seat back to the wall came out, and also the smoke detector came off of the ceiling and was lying in the floor. I knew I had to do something to help the ride. I ordered these parts from Etrailer and installed them and I was amazed at how well they worked. On our next trip I opened the door on the trailer and everything was still in its place, I could hardly believe it, what a difference. As an added bonus these parts took away the little bit of sway the trailer had. The sway when a tractor trailer rig passed us is completely gone now. It pulls so good now that I forget it is back there sometimes. I highly recommend this to anyone with a bumper pull travel trailer.
I put these on my tandem axle boat trailer, they arrived in 3 days and appear to be very good quality. The 5 year warranty tells me I shouldn't have any issues.
Install when according to plan. Fairly straightforward.
Pending road test, but seem to be very good quality and it is nice they are can be greased for longer life. On my application I went from a 4" high equalizer high link to this (2" high), but welded an extension on the trailer frame to maintain the prior spring/suspension geometry, but I don't think it is required, I primarily did this as my other frame upgrades would have interfered with the grease fittings, so the 2" extensions gave needed clearance in my application.
They are doing well for us. Only issue was after installation and a trip when I went to grease the pivot points, one of the zero fittings came off. Looks like the hole was never tapped completely. Just a few threads in the beginning. I ran a tap in it and installed a new zero fitting. This would have much easier before installation.
Easy install and makes the trailer ride noticeably smoother.
They were easy to install, and have worked like a charm. We would recommend these to anyone looking!
I worked with William over the phone and was able to order the correct part. It arrived yesterday and it is the right part for my RV. Great quality, seems like a fair price and great customer service by William B.
I got exactly what I needed for a fair price and received it in a very timely manner.
They sent what I ordered and it arrived before I even arrived at the delivery before bI got there.
Ordering was easy and the product got here four days earlier that expected.
Do you have a question about this Trailer Leaf Spring Suspension?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Randy
6/25/2023
It is still working great. I do not regret putting on these items , they have worked well for us.