Replacement Battery Box for Curt Soft Trac I Trailer Breakaway Kits - Side Load
(5 reviews)
Price: $9.53
In Stock
Replacement Battery Box for Curt Soft Trac I Trailer Breakaway Kits - Side Load
Item # C52027
Retail:$13.52
Our Price: $9.53
You Save: 30%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (5)
- Q & A (0)
- Videos (1)
- Photos
CURT Accessories and Parts - C52027
- Trailer Breakaway Kit
- Battery Box
- CURT
Replaces the side-loading battery box that came with your Curt Soft Trac I trailer breakaway kit. The lockable lid screws down and has built-in rubber gaskets that help to keep water out. Weather-resistant polyethylene construction.
Features:
- Replaces the battery case that came with your Curt Soft Trac I breakaway kit (C52040 or C52041)
- Side-loading case is easy to access from the side
- Lockable lid deters theft
- Fastens using (4) 1/2" x 2-1/2" screws (not included)
- Locks using a padlock (sold separately)
- Weather-resistant polyethylene construction protects your battery from moisture and debris
- Rubber gaskets inside the lid keep water out
- Bolt-on installation
Specs:
- Dimensions: 5" long x 3-3/4" wide x 3-3/8" tall
- 1-Year limited warranty
52027 Curt Battery and Charger Case for Soft Track 1 Break Away Systems
Video of Replacement Battery Box for Curt Soft Trac I Trailer Breakaway Kits - Side Load
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of CURT Replacement Trailer Breakaway Kit Battery Box - C52027
Hi there. I'm Michael with etrailer.com. Today, we're gonna take a quick look at this CURT replacement breakaway kit battery box. This is going to replace the battery case that came with your CURT Soft-Trac 1 breakaway kit. This will work with both the models that you see on the screen there. This is going to be a side-loaded case that will allow for easy access from the side.
The lockable lid is going to help deter theft by allowing you to fasten a padlock on. The padlock is sold separately, of course, but it is going to allow you to lock it closed so that you don't have to worry about someone coming along and taking off your battery. It fastens using four 1/2 inch by 2 1/2 inch screws, which are also not included. You will have to provide those separately. This is going to be a weather-resistant polyethylene construction, so it is gonna protect your battery from moisture and debris.
You do have the rubber gaskets inside the lid. That's gonna help keep water out. It is a bolt-on installation, so you'll bolt on using those screws, as I mentioned a moment ago. As far as our dimensions go, this is right about, right about five inches long by, I'm gonna say 5 1/4 of an inch wide and approximately 3 1/2 inches tall. So if you are needing to replace that original battery case, this is going to be a direct replacement from CURT.
So you can trust that your battery's gonna fit inside well, and you're not gonna have to worry about fit issues or compatibility problems. That completes our look for today. Again, I'm Michael with etrailer.com. Thanks for watching..
Customer Reviews
Replacement Battery Box for Curt Soft Trac I Trailer Breakaway Kits - Side Load - C52027
Average Customer Rating: 4.0 out of 5 stars (5 Customer Reviews)
Replaces the side-loading battery box that came with your Curt Soft Trac I trailer breakaway kit. The lockable lid screws down and has built-in rubber gaskets that help to keep water out. Weather-resistant polyethylene construction.by: Douglas11/01/2017
VERY Solid Box. A bit warped but lid and box still sealed and the battery pushed it back to square. I was surprised there were no screws supplied to seal the box...but the rubber and end button were there so all is good.
Douglas
11/1/2018
Everything on the trailer is working fine. It is so comforting to know that I will see lights in every corner when we try them out before going on the road.
by: Jim M07/19/2018
for my installation I made some modifications. 4 1/4" bolts - long over 3 inches bolt this batter box to my boat trailer. I took a hack saw and cut enough space in the bolt tubes to put nut at the back. Why? put the battery in the box . tighten the nuts with washers so the box is tight with battery in the box. Attaching the box to an aluminum plate. Bolts are long long enough to then put a second set of bolts behind the plate. In the space I had to work keeping the seal in place, the electrical leads on the terminals and installing the box was a problem. I am using a two pin connector to connect to the system or to the charger. If I take the box off of the trailer for the winter then I unplug the connector and remove the 4 rear nuts and take the batter and the box into a warm storage place and plug it into the charger. After I made this change I did like the box. Before I did that it was hard to get it installed correctly. To many possible items to get aligned. Box is inexpensive also.
by: Robert 06/04/2021
Product is exactly as described. Will be replacing old warn and broken units.
by: Rick05/20/2021
by: Rick 03/16/2021
5
5
See what our Experts say about this CURT Accessories and Parts
- Compatibility of Side Load Battery Box # C52027 with UB1250 Style BatteryReplacement Battery Box for Curt Soft Trac I Trailer Breakaway Kits - Side Load # C52027 has outside dimensions of 5" long x 3-3/4" wide x 3-3/8" tall and will fit the UB1250 style battery we carry which has dimensions of 3-1/2" long x 2-3/4" wide x 4" tall. This is part # C52023. If you want the complete kit, I recommend the Curt Soft Trac II Trailer Breakaway Kit with Battery Charger # C52028. If you have a battery with the dimensions you gave, then I recommend the Curt Battery Box...
view full answer...
Info for this part was:
Edited by:
Lindsey S
Written by:
Chelsea B
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
Installed by:
Michael B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Douglas
11/1/2018
Box has not weathered in the TX sun and seems to be keeping the water out.