Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Buyers Products Weld-On Safety Chain Retainer has a removable clevis pin for ease of painting and chain replacement. Retainers are rated to 10,000 lbs.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, we're gonna be taking a look at the Buyers Products Weld-On Safety Chain Loops. So these are gonna be a weld-on product. And the nice thing about these, what sets it apart from all the others is just the fact that we're gonna be able to remove this little clevis pin right here. So, if we want to replace a chain or maybe we just wanna install it and then paint it to match our trailer, all we gotta do is just get a little tool in there, might be able to do with your hands so you can pull this out. It would be a lot easier with the tool, but you can pull this little pin out, and remove your chains really, really easily. So, a lot of the other ones that are weld-on: One, you're gonna have to get the chain in there, and then you're gonna have to weld it on.
So, it's just a little bit more of a hassle to install. And then once it's on there, and we wanna paint it to match our trailer, the chains are gonna get a little painted too. So, this is gonna be a great way to kind of just make it a little bit easier on yourself. You can install it without the chains on there, and you can paint it, then you can put your chains on. So if you wind that, switches out your chains, for whatever reason, it's gonna be the easiest way to do that.
If you're gonna go with this set up, just make sure you have a 5/16 inch chain, and then whatever length that you have. We do have a lot of different chains on our website. So just go ahead and grab that. The clevis pin is gonna be zinc coated, so it's not gonna rust away. So even if you don't end up painting it, which you could do whatever, it's not gonna rust away even if you don't.
It is made of forged steel, the whole entire little retainer, and this is gonna be pretty much ready to paint after you weld it on. Just make sure whenever you are doing welds, that you have somebody who knows what they're doing to get these things installed. As far as dimensions go, that's gonna be about four inches in length and depending on what kind of angle you go with, it's going to stick out a little bit lower than your tongue, depending on what size tubing you use. So that's just gonna be variable depending on how you set it up. But for this one in particular, it's only adding about two inches from the bottom of our tube here.
What the thickest part, without the clevis pin from outside to outside is about an inch and a half. And then on the inside, it's about three quarters of an inch. I would definitely put this on the heavier duty side when it comes to safety chain retainers. And the best thing about this is, we're really not gonna have to use much energy at all, to swap out our chains. So, if you are doing that quite often, or you're breaking chains, these are gonna be the ones you want to go with. And that'll do it for a look at the Buyers Products Safety Chain Retainers..
Average Customer Rating: 4.8 out of 5 stars (37 Customer Reviews)
This is the way to go for attaching safety chains to your trailer. I used to weld the safety chains directly to the trailer but recently discovered that is not "legal" This bracket is legal and also allows replacing the chain(s) in the future without welding. This bracket provides ample length to make a good weld. Highly recommend.
the best way I know of to mount safety chains
This part was exactly what I needed, and I was impressed to find it available on etrailer.com! I welded the Buyers Products Safety Chain Retainers to the gate of my dump truck, and they have held-up well with repeated heavy use. Thank you for coming through with the odd parts I need, etrailer!
I love these weld on anchors. Provides a cleaner better looking product. Plus it’s lot simpler to replace a chain if one gets damaged.
Good quality, easy to weld on
Very easy and clean way to put safety chains on a trailer.
These safety chain retainers are a life saver!!! Shortly after installing them on my welding trailer (witch weighs roughly 6,000 lbs to 7,000 lbs) i was towing it home after a job late in the evening and hit a bump and the trailer coupler malfunctioned and the trailer unhooked from the truck and luckily the safety chains did their job and no one was hurt but the chains were damaged. BUT since i installed these safety chain retainers i was able to swap out the chains and fixed the hitch without any problem!!! I would recommend them to anyone how is installing or replacing safety chains on any trailer!
I am using these on a gooseneck trailer and it is a great product. I like these safety chain retainers because they are strong and give the trailer a clean professional look. Not only that, when using these retainers, the safety chains can easily be removed and replaced if needed.
This is a great product.
It’s much safer than welding bent metal to a trailer for safety chain attachments.
I really like that the chains are removable/replaceable with this setup.
Highly recommended!
Of the various solutions commonly used for attaching safety chains to a trailer this is one of few that comes close to the SWL of safety chain or does not degrade the chain it’s self. A popular method is to mount the chain link with a bolt and washer. Even with a Grade 8 bolt this loads the bolt in a cantilevered single shear imposing bending stresses into the threaded portion of the bolt threaded into base material. This forms a weak link. This link provides a strong double shear joint. The weld tab provides more than adequate space for weld to equal the capacity of the pin joint and chain.
Makes changing a broken safety chain ea sy
Chris
1/22/2022
They have worked great. Should be the only way anyone who builds trailers Mounts there safety chains
Used these on a Ag Mech show trailer. Received multiple praises from other competitors and the judges. Have purchased more for upcoming projects
Pretty simple device so not much could go wrong. But with all the low quality products these days, I wouldn't be surprised.
This welded on and painted nicely. My chains fit as advertised per the size with no binding. I might have replaced the cotter pin with a heavier one, but don't remeber for sure.
The saftey chain weld on anchors were just perfect , and heavy for the trailer I was building . Thanks for a great product.
I wish I would of had these 6 months ago when redoing a equipment trailer.
Work great and was easy to weld. Still holding up well, makes changing the chains easy when needed.
Good prices, good service and quality p roduct.
Well made and easy to use
Great product
Like always a good product.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Joshua
11/9/2023
They are still working great. I would definitely buy them again.