bing tracking image
  1. Accessories and Parts
  2. Bulldog Winch
  3. Electric Winch
  4. Pulleys and Snatch Blocks
  5. Snatch Block
Bulldog Winch Snatch Block - Silver Zinc Coated

Bulldog Winch Snatch Block - Silver Zinc Coated

Retail:$72.31
Our Price: $41.83
You Save: 42%
Accessories and Parts
Shipping Weight: 6 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Videos

Need help with installation?
Locate installers near me
1-800-940-8924 to order Bulldog Winch accessories and parts part number BDW20005 or order online at etrailer.com. Free expert support on all Bulldog Winch products. Great prices and Fastest Shipping for Bulldog Winch Snatch Block - Silver Zinc Coated. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (3)
  • Q & A (0)
  • Videos (1)
  • Photos

Bulldog Winch Accessories and Parts

  • Electric Winch
  • Pulleys and Snatch Blocks
  • Snatch Block
  • Bulldog Winch


  • Silver zinc coated snatch block resists corrosion
  • 17K Break strength
  • 7K WLL (working load limit


20005 Bulldog Winch Snatch Block - Silver Zinc Coated

Item # BDW20005




California residents: click here


Video of Bulldog Winch Snatch Block - Silver Zinc Coated

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Bulldog Winch Snatch Block BDW20005 Review

Today we're going to review part number BDW20005 this is the Bulldog snatch block with a 17,000 pound weight capacity and a silver zinc plate finish. This block will increase your winch's pulling power, it'll also change the direction of your pull without damaging the wire rope. It is designed to use a maximum wire rope diameter of 3/8 of an inch. Does have a 17,000 pound max load or breaking strength capacity and a 7,000 pound working load limit capacity. This is designed to be used with 6,000-8,000 pound winches. As you can see it has these nice, easy open side plates for simple rope mount and the snap block is a silver zinc plating for corrosion protection.

The other nice thing on this is right in the pulley wheel, there is an actual grease zerk fitting right here on top that you can put a grease gun onto and pump grease in there to lubricate that pulley wheel. That should do it for the review on part number BDW20005, this is the Bulldog snatch block with a 17,000 pound weight capacity and a silver zinc plate finish. .


Customer Reviews

Bulldog Winch Snatch Block - Silver Zinc Coated - BDW20005

Average Customer Rating:  4.7 out of 5 stars   (3 Customer Reviews)


by:

I tried to write a review on your link below, but no luck tonight. We have completed our ATV/Tractor log arch (pictures attached) of which included the Dutton-Laison Hand Winch (DL14881) and the 7/32" x 50' Fulton Galvanized Winch Cable(FWC7500100). I purchased both items from etrailer, and together they work to easily drag and then load up 14" to 22" white pine logs into the log arch. While most logs are 8' long, the winch will easily handle a 16' log. The winches hand brake works very well in tandem with the down mode of the winch handle, when lowering a heavy log back onto the ground. Both of these items met and exceeded my expectations for both quality and price point, plus another bonus is the winch is made in the USA. I am very happy to say that you and etrailer have made our log arch project a big success!



by:

Snatch block should serve me many years. It is a lot more heavy duty than it looks in the pictures. The grease zirk is a nice feature.



by:


3
3

See what our Experts say about this Bulldog Winch Accessories and Parts

  • Recommended Winch To Pull A 2000 lb Pontoon Boat Up A 45 Degree Incline Transitioning To 30 Degrees
    For this application, I reached out to my contact at Bulldog Winch and we came up with what we believe is what you will need based on the information you gave me. There are many factors involved here, so we are trying to cover all the bases for you and make it easy. I will give you our recommendation for using the oak tree to mount the winch, and using the 4x4 truck to power it. I recommend the Bulldog Winch Standard Series Off-Road Winch - Wire Rope - Roller Fairlead - 8,000 lbs, #...
    view full answer...
  • Will Pulley Block, part # BDW20005, work with Smittybilt 10k winch?
    The Winch Pulley Block, part # BDW20005, will work with winches that have 5/16-inch thick wire rope. So as long as the weight capacity and wire rope thickness match up, you should be fine.
    view full answer...
  • Winch Capacity Needed To Pull 4000lb Vehicle Into Enclosed Trailer
    A Superwinch LT2500 has a 2500 lb line pull capacity. For a rolling load like a car with fully inflated tires, a winch with a capacity equal to the weight of the vehicle, in your case 4000 lbs is recommended. This means that your winch has about half the needed capacity to pull that vehicle up a 12% slope into the trailer. If a pulley block like # BDW20005 is used, you'll effectively double the capacity of your winch which would do the trick for you and allow you to load the trailer, but if...
    view full answer...
  • How Could a Pulley Block Be Used to Slow Down Plow Blade From Raising and Lowering
    A pulley block like the part # BDW20005 will reduce the speed of a winch by 50 percent when used. I attached a picture that shows how one normally gets used in a more traditional application. Basically you attach the pulley block to the object that is getting moved (in your case the plow blade), and then you route the cable through it and back to the same area as where the winch is installed. This slows the pulley down and also increases capacity. We don't have a specific recommendation...
    view full answer...
    Image 1 for
  • Availability of Pulley Block with Weight Capacity of 10,000 Pounds
    We have the just the pulley block for you. Take a look at part # BDW20005. This pulley block has a capacity of 17,000 lbs and is designed to be used with winches that have a rated line pull up to 7,000 lbs. You can remove the hook and connect to an eye if needed. I have attached a link to a product review video for this pulley you can check out.
    view full answer...
  • Electric Trailer Winch Recommendation for Hauling Car into Enclosed Trailer
    The Bull Dog Utility Winch, # BDW15020, is a great choice for the application.. This winch is designed primarily for race car trailers, open and enclosed and will control the cable feed in and out so you could stop the vehicle at any point when loading and would not have to worry about a runaway vehicle when unloading. For installing the winch in the trailer it is hard to make a recommendation without seeing the trailer and framing under the trailer. You can mount the winch in any location...
    view full answer...
  • Recommended Pulley Block To Use With Offset Winch On Trailer
    You can use a pulley block like part # BDW20005, to pull your car on to a trailer with the winch being offset. You will want to make sure the winch is well secured for safety. This pulley block has a capacity of 17,000 lbs break strength and is designed to be used with winches that have a rated line pull up to 7,000 lbs working load. I have attached a drawing that shows how to attach a pulley when offsetting the winch. I have attached a link to a product review video for this pulley...
    view full answer...
    Image 1 for
  • Pulley Block Compatible With 3/16" Hand Winch Cable
    It sounds like you're looking for a pulley/snatch block to use with the Hand Winch Cable with Safety Hook # DL24043. I recommend using the Bulldog Winch Snatch Block # BDW20005. This is compatible with cables up to 3/8" in diameter so it will work for this particular cable or any other as long as it is no larger than 3/8". It has a 17,000 lb brake strength and 7,000 lb working load limit which is well above the capacity of the cable.
    view full answer...
  • Snatch Block to Use with Bulldog Winch part # BDW15020
    The Bulldog Winch Snatch Block # BDW20005 would work great with the Bulldog Winch part # BDW15020 as it has more than enough capacity and was designed for use with synthetic rope like the winch has.
    view full answer...

Do you have a question about this Accessories and Part?


Info for this part was:

Employee Tyler C
Edited by:
Tyler C
Employee Jeff D
Installed by:
Jeff D
Employee Lisa S
Written by:
Lisa S
Employee Matthew S
Updated by:
Matthew S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.