Brophy Camper Tie Downs that Fit 2017 Chevy Silverado 1500

Question

Question:

will these work on a 2017 silverado 1500 6.5 bed with a bed liner under the lip? thanks......

asked by: Perry G

0

Expert Reply:

For your 2017 Chevy Silverado 1500 the part # HSSF would be the correct camper tie downs. We have confirmed with Brophy that these work on the newer Silverados.

For a hardware kit you'd then need the part # TDHP.

expert reply by: Jameson C

0

Answer 1

As long as the double wall still allows for the clamp on the underside of your bed rail, the Brophy Tie-Downs #HSSF will work. The brace on the bottom is adjustable so it will account for the additional wall on the inside of the bed. If you don't…

view full answer...

Answer 2

While we offer camper tie-downs that fit a 2022 Chevy Silverado 2500 HD, I checked with the manufacturer, and the Happijac tie-downs do not fit your truck. So instead what you will need are TorkLift camper tie-downs, and please note there are…

view full answer...

Answer 3

Did you try the longer rear hooks in the front position of the #LC182895? If those were long enough they are available separately with #LC182896.

view full answer...

Answer 4

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 9

Hey Cody, you are installing this B&W Turnoverball #BWGNRK1020 on a 2021 Chevy 2500 correct? If so, the M14 bolts are definitely the correct size. It is possible that the holes in the frame are corroded which is preventing the bolts from…

view full answer...

Answer 10

Hey Richard, thanks for reaching out! The Dexter DX7.5 Drop-N-Go Brake Actuator #099-175-00 is a great option for a replacement actuator because it's a direct replacement for the common Model 60 actuators that were popular in the '90s.…

view full answer...

Answer 11

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...