2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
(2477 reviews)
Price: $12.21
In Stock
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
Item # 19258
Retail:$29.73
Our Price: $12.21
You Save: 59%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (2477)
- Q & A (0)
- Videos (2)
- Photos
Draw-Tite Trailer Hitch Ball - 19258
- Trailer Hitch Ball
- 2 Inch Diameter Ball
- 3/4 Inch Diameter Shank
- Standard Ball
- 3500 lbs GTW
- Class I
- Class II
- Chrome-Plated Steel
- Draw-Tite
- 1-9/16 Inch Shank Length
Durable steel ball has a 3/4" diameter x 1-9/16" long shank. Built-in wrench flats ease installation. Chrome finish resists corrosion. Fine threads provide strong grip. Lock washer and nut included.
Features:
- Hitch ball provides a connection point for your trailer's coupler
- Fine threads provide exceptionally tight, strong grip
- Durable steel construction
- Corrosion-resistant chrome finish
- Built-in wrench flats make it easy to hold ball in place while tightening the nut
- Lock washer and nut included
Specs:
- Ball diameter: 2"
- Shank dimensions: 3/4" diameter x 1-9/16" long
- Weight capacity: 3,500 lbs
- Fits ball mount platforms 3/8" to 5/8" thick
- Limited lifetime warranty
63820 Draw-Tite 2" Hitch Ball with Short Shank - 3,500 lbs GTW - Chrome
California residents: click here
Video of 2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Draw-Tite 2 Inch Long Shank Hitch Ball Review
Brad Hello, neighbors, it's Brad here at etrailer, and today we're taking a look at the Draw-Tite two inch ball. Now this is a 3/4 inch diameter and the shank length is gonna be 1 9/16. This is gonna be a Class I and Class II ball, so it's gonna be great for towing some smaller trailers. Now this ball is a 3,500 gross trailer weight rating, and this is gonna be great for your Class I and II, so smaller cars and vehicles can be able to tow this, especially if you have an inch and 1/4 hitch. Now this can fit on ball mounts that are anywhere from 3/8 to 5/8 inch thick. Now this ball is rated at 3,500 pounds, which is gonna be great for a teardrop trailer just like this, but it's one part of many parts of towing components that you need to make sure is up to that number to make sure it's safe.
So not only should your ball match that weight, but also the ball mount as well as the hitch and the vehicle itself. So it's important to check all those numbers and take the lowest number of all those just to be safe. And that way you're not trying to tow something that's heavier than your components. So installation of the ball on the ball mount is obviously pretty simple. Now included with the ball is gonna be the nut as well as the split washer here.
And also you'll see these flat spots here on the top part here on the ball, and that's gonna be great. You can put a wrench there as you torque this to spec. Now you're gonna want to follow the manufacturer's recommendations for torque specs to make sure that this is tight enough, but also not too tight. And you're gonna need to use a torque wrench to achieve that. If you don't have a torque wrench, we have those here at etrailer.
You can also generally rent those in an auto parts store, but make sure that you torque this down properly and that way, you're towing safely. And this is steel construction, so it's obviously very strong. It also has a nice chrome finish, so this is gonna look really good for a long time. It pretty much won't scratch, it may get a little dings and dents, but overall, the lifetime of it, it's gonna look great. Now sometimes putting a little bit of grease on here when you're towing is also gonna prolong the life of this chrome looking good.
And that was a look at the Draw-Tite two inch ball, and that's with the 3/4 inch diameter by 1 9/16 shank..
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs - 19258
Average Customer Rating: 4.8 out of 5 stars (2476 Customer Reviews)
Durable steel ball has a 3/4" diameter x 1-9/16" long shank. Built-in wrench flats ease installation. Chrome finish resists corrosion. Fine threads provide strong grip. Lock washer and nut included.by: Carlos G12/05/2023
I wasn't sure which hitch ball to get but I called and Paula was super helpful with me. I told her which bumper I was getting but didn't which hitch ball to get. I'm not a truck guy, in fact, I'm not a fan but this is supposed to be a gift for my son to his truck so I wanted it to be perfect and Paula was great she added it to my order for me. Once I got the bumper on, the hitch ball went perfect right after. Definitely worth the purchase and my son's truck looks so much better now.
by: Barry 04/17/2024
Yes the trailer, ball hitch and battery you installed worked great. It has served us well and you did a great job.
by: Scott04/19/2024
This just the product I was looking for because I needed an especially long length (to clear the back bumper) and extra rise (to accommodate the trailer height). While the website was great, the ordering process was even better, because I needed help from the sales associate in marrying two products. I was given great service, from e-trailer.
by: Charles03/28/2024
The package was left up one flight of stairs, thirty feet from my apartment and vulnerable to theft. Luckily my son recognized the box and asked if that was some I ordered. We recovered it and no other issues came into play.
Thank you,
by: David 03/01/2024
Trevor was quite helpful in figuring out what I needed to adapt to my hitch. Thank you.
by: Hugh09/20/2023
I did not receive this item. The hitch and wiring harness arrived, but no hitch ball...
by: Brian01/26/2024
This hitch ball has held up great and shows no signs of wear after almost a year
by: Dave S.08/01/2020
Everyone said that they never saw one on a Mercedes-Benz, let alone, a convertable.
This is my father's 1965 sailboat and 1965 Sears trailer. The car is a 2002 Mercedes-Benz CLK 450. I had not sailed the boat since 1977. I have the license plate from the trailer to prove it. The dealer who sold me the car had never put a hitch on a car. After he saw the trailer attached to the car, he offered me a job. I turned it down, but I told him if he ever got a request, I would help him with it.
Thanks for everything.
by: Alex 12/09/2023
I want to say thank you to the manufacturer for instructions on how to properly tighten the hitch ball nut.
by: Kevin03/15/2019
Customer service was amazing. I ordered this for my business and etrailer immediately called me after I had ordered the wrong ball size. Simultaneously, another customer relations personnel reached out via email to confirm I had meant to order the ball. Cant say enough of how easily they solved an issue before it turned into a problem. Installed hitch the day it arrived, less than 30 min with the help of their instructions and an install video.
by: Sarah07/27/2020
Quick. Fair Price. Excellent Communication. First, we ordered the hitch and had it installed. Then we needed the perfect fit for the task at hand: to pull a tank with gray water through a campground. Very specific. Just for our toad, a Smart car.
Etrailer.com has the perfect software to lead you to what you need for the perfect combination. Quick shipment, reasonably priced. Direct communication for every step in the process. All in all, exactly what you’d hope for during these extremely dysfunctional time.
by: Anthony 04/10/2024
Package came quick just in time for a trip in two days! Package and label was created the same day I placed my order on sunday.
by: Don 04/17/2024
Great quality!
by: Juan G05/06/2021
Now I can tow my teardrop trailer or put on my bike rack. etrailer made it easy for adapting my Scion for towing.
by: Michael06/09/2023
Easy to install... bought the wrong size to fit the 1" receiver I also ordered. Purchased a reducer... no other issues.
by: Jeff O03/28/2023
Adam noticed that the trailer hitch I purchased and the pins would not line-up correctly. He personally contacted me to find me the correct parts that will fit my car before it was even shipped. I received the ordered parts in just several days. He saved me from so much of headaches and hassle. Thank you for your professionalism and caring attitude!
by: Matthew06/15/2020
I got the hitch to tow my pond boat/rig. So far so good. Got the products in quickly and came with a load of good and helpful information to install it.
by: Matt W.08/07/2017
The hitch was well made and relatively easy to install. I installed it on a 2016 Golf Sportwagen LE. I can confirm that as others have stated that I did NOT need to trim the bumper fascia (as the instructions said I would need to). I separated the black, lower part of the fascia from the top part before reinstalling the main fascia. I was then able to snap the lower part on after fitting it around the hitch chain loops.
A couple of other notes: the LE has the rear cross traffic alert. The sensors are bolted on each side of the bumper. I thought with the additional thickness of the sensors that the bolts might not be long enough but they fit fine.
As has been mentioned in other reviews, the torx screws in the wheel wells have very little clearance. I highly recommend getting a torx racquet set. I bought one at a hardware store for about $20 (Kobalt 24-Piece Standard (SAE) and Metric Mechanic's Tool Set with Hard Case). This makes the removal of those screws straight-forward.
by: Pierre D.05/22/2012
The short shank of this ball is great for an ATV going to off road because it give more ground clearance, so it’s less likely to hang in stumps or rocks in the forest. I use it with my LogRite ATV Arch, with my wood splitter, and for transporting maple water to my sugar house to produce maple syrup.
by: Eric Newman01/08/2023
I just purchased a new hideaway hitch system. But the hitch sits only 15 inches off the ground at best. And, my trailer coupling is 22-23 inches off ground. So l needed 7-8 inches of rise on the new 1.25 inch receiver system.
Internet research took me to etrailer and the Brophy hitch. I got 5.5 inches with the Brophy hitch, the highest available for a 1.25 inch receiver I could find. The others are limited to 5 inches max. I added another 1.5 inches with your Curt shock absorbing hitch. Voila, with a combined 7 inches of rise and on level ground the trailer now rides perfectly level!!!! Both parts were very easy to connect.
Delivery was speedy. Thank you for saving the day and my investment in an expensive new hideaway hitch!
by: Jo06/22/2020
Great product. Poor instructions. Once I was given correct instructions it was put on without issue.
by: Douglas 06/29/2023
Usps dropped the ball on this one,Delivered the package with nothing inside but packing paper,Big hole on side of carton
by: Angel N.07/09/2022
A++ product at great price and fast shipping, it's a one stop shop all you need in one box and with the video makes it easy to install on my 2015 nissan altima with the bolts thru the trunk and didn't even to remove the mufflers by sliding the hitch in one side and pushing up the other end while pulling the one muffler to one side I was able to install quicker and the plug and play wires makes it easy than trying to decode wires. Thank-you.
by: MoHusker09/08/2017
Fastest delivery I have ever had. Ordered Wednesday at 5PM, arrived Thursday at 3PM. I'm only a couple hundred miles from Wentzville, but still, excellent. The hitch receiver (2008 Pilot) installed quickly and easily. No need to remove spare or lower muffler. I supported the left end on a large cooler and quickly maneuvered the right side above the tail pipes. The mounting holes were right on target. I had to tap mine to remove rust, but that's easy as well. The wiring harness was also a snapto install. Simple to plug into existing fitting and the wiring box tucked away nicely beneath the trim as advertised. There are options about what to do with the wiring tail and trailer connector. I chose the method shown in the video...leave it rubber-banded in the storage well. Others have run it outside through available holes, but I did not want to leave it exposed to road grime. etrailer's videos were very detailed and shown on my specific vehicle for both the hitch and the wiring harness. Good values as well. If I were Draw-Tite (or Curt) I would include a complementary rubber plug with their logo...cheap advertising.
Mohusker
9/8/2018
All products holding up well. Easy install, good quality. Works as advertised.
by: Douglas 11/29/2023
Good quality. Competively priced
25
2459
Show More Reviews
See what our Experts say about this Draw-Tite Trailer Hitch Ball
- What is Towing Capacity of 2018 Buick Regal TourXLooks like your 2018 Buick Regal TourX has a towing capacity of 1,000 lbs so you'd need either a smaller trailer or a larger tow vehicle to tow your trailer that weighs 1,600 lbs. The Draw Tite hitch part # 36661 that you referenced is a confirmed fit though and would be a great hitch to use. It's a Class II with more capacity than your vehicle so it would easily handle up to 1,000 lbs. For trailer wiring the kit you'd want is the Curt part # C56389 which is easy to install and very reliable. For...
view full answer... - Hitch Receiver and Towing Set Up for a 2021 Kia SoulI can recommend the Curt Trailer Hitch item # C67FR. This class I hitch receiver is custom fit and bolts directly to your Kia's frame with included hardware. It has a maximum gross trailer weight of 2,000 lbs and a maximum tongue weight of 300 lbs. It has a 1-1/4" receiver opening which allows you to use a wider range of accessories than you could with a 1-1/4" opening. It also has a wide range of accessory options like the Swagman Chinook Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches...
view full answer... - Drawbar for Trailer Hitch of 2005 Pontiac G6For the Class II hitches that fit your 2005 Pontiac G6 like the Draw Tite part # 36426 the drawbar/ball mount you'd want would be the # 36065. Then for a hitch ball you'd want the part # 19258 for a 2 inch ball or part # 19256 for a 1-7/8 inch hitch ball.
view full answer... - Custom Fit Class 2 Hitch for a 2008 Mazda B2300 I have a custom hitch for your Mazda B2300 truck but the Curt Trailer Hitch Receiver item # C12923 will not fit. The bolt hole spacing is off. Instead, you will want the Curt Trailer Hitch Receiver item # C12012. This hitch also has a 1-1/4" class II receiver. The Curt Hitch item # C12012 is custom fit and attaches to your Mazda with included hardware. It will not require drilling. This hitch has a 350 lbs tongue weight and a 3,500 lbs towing capacity. If you plan on doing any towing...
view full answer... - Recommended Class I Hitch for a 2023 Kia Forte SedanThe best hitch for your 2023 Kia Forte Sedan is going to be the Draw-Tite Trailer Hitch item # DT83MR. This hitch is custom fit and bolts to your Kia with included hardware. This is a class I hitch, with a 1-1/4" receiver, that weighs 32 lbs. It has a 2,000 lbs towing capacity, and a 200 lbs maximum tongue weight. I have linked a picture below so you can see what this hitch looks like when installed. If you are planning on towing you will also need a wiring harness item # C54ER and the...
view full answer...
- Recommended Class I Hitch for a 2023 Kia Rio SedanThe best hitch for your 2023 Kia Rio Sedan is going to be the Draw-Tite Trailer Hitch item # 24964. This hitch is custom fit and bolts to your Kia with included hardware. This is a class I hitch, with a 1-1/4" receiver, that weighs 32 lbs. It has a 2,000 lbs towing capacity, and a 200 lbs maximum tongue weight. I have linked a picture below, along with an installation video, so you can see what this hitch looks like when installed. If you are planning on towing you will also need the...
view full answer...
- Recommended Tow Package for 2018 Mazda 3 SedanTo set your 2018 Mazda 3 up for towing a light trailer you will need a trailer hitch, wiring harness, ball mount, and hitch ball. Starting with the hitch I recommend the Draw-Tite Sportframe Trailer Hitch Receiver # 24912 because it offers the easiest install process that doesn't require any modification to the underbody trim panel on your vehicle like with the other available option. It is a Class I hitch that features a 2,000 pound towing weight capacity and will provide you with a...
view full answer... - Can a 2014 Ford Fiesta Sedan Tow a TrailerThe Draw-Tite Sportframe Trailer Hitch Receiver part # 24910 is rated for up to 2,000 lbs gross trailer weight and 200 lbs tongue weight. I can only imagine a small single axle utility trailer would fall within these metrics. That said, the 2014 Ford Fiesta which said trailer hitch is designed for is not rated for towing so if you want to do so then you will need to proceed at your own risk. I have attached a list of parts you will need if you would like to more forward with this: T-One...
view full answer...
- Recommended Class I Hitch for a 2023 Kia SeltosThe best hitch for your 2023 Kia Seltos is going to be the Curt Trailer Hitch item # C65FR. This hitch is custom fit and bolts to your Kia with included hardware. I really like this hitch because the crosstube mounts behind your bumper cover leaving only the 1-1/4" x 1-1/4" receiver visible. This is a class I hitch, with a 1-1/4" receiver, that weighs 27 lbs. It has a 2,000 lbs towing capacity, and a 200 lbs maximum tongue weight. I have linked a couple of pictures below, along with...
view full answer...
- Fix for Exhaust Rattle After Installing the # C11000 Hitch on a 2010 Volkswagen GTIExhaust rattles do occur on some vehicles. I have not had the opportunity to install this hitch on the GTI yet so I spoke with my contact at Draw-Tite. He stated that the exhaust was taken into account when designing the hitch and that they have had no complaints about exhaust rattles from customers who have installed the hitch. The instructions for the # C11000 hitch show that hitch will be sandwiched between the rear exhaust hanger and the vehicle frame member. This repositioning should...
view full answer... - What Trailer Hitches Will Fit 2009 Toyota Matrix XRS Without Any Trimming Of The Rear FasciaOn the Draw-Tite Class I Trailer Hitch, # 24812, it will fit on your 2009 Toyota Matrix XRS with the lower rear fascia. The rear fascia has a center section that will have to be removed when you install the hitch. It is not hard to remove that section because it is made to be removed for a trailer hitch installation. Also needed for towing would be the Draw-Tite Ball Mount, # 3593, and either the Tow Ready 1-7/8 Inch Hitch Ball, # 19256, or the Tow Ready 2 Inch Hitch Ball, # 19258. The...
view full answer... - Availability of a Trailer Hitch and Wiring for a 2011 Ford Mustang GTI spoke with my contact at Draw-Tite and he stated that trailer hitch # 24863, will fit the 2011 Mustang GT. I have included a link to the installation details. If you plan on doing some towing the hitch does not come with the proper ball mount. You will need part # 3594. For a 1-7/8 inch ball use # 19256 and for a 2 inch use # 19258. For trailer wiring use # 118487.
view full answer... - Correct Trailer Ball for Draw Bar Included with Curt Class II Recevier Hitch for 2004 Ford FreestarThe ball mount included with the Curt Class II Receiver would use a trailer ball with a 3/4 inch shank. The shank needs to be at least 1-9/16 inches long. We offer a 2 inch Hitch Ball from Tow-Ready, part # 19258 that would work great with the draw bar. I have provided a link to the hitch installation instructions as well as a link to the trailer ball. You can find the links below.
view full answer... - Recommended Wiring Harness and Ball Mount for 2018 BMW 4 SeriesThe Curt Trailer Hitch Receiver part # C11367 is a great option for a 2018 BMW 4 Series. In order to complete your towing setup you'll also need a trailer wiring harness and a ball mount/hitch ball. For the wiring harness, I recommend the ZCI Circuit Protected Vehicle Wiring Harness part # 119250KIT which is a clamp-on, no splice option. Then for the ball mount and hitch ball; I recommend the Curt Drawbar part # C45521, Curt Pin and Clip part # F-4, and Draw-Tite Hitch Ball part # 19258.
view full answer... - Will Removing Heat Shield to Install Hitch on 2020 Hyundai Sonata Cause Damage to VehicleThe heat shield needs to be removed in order to install the Draw-Tite # DT74MR on your 2020 Hyundai Sonata because it prevents the hitch from being in direct contact with the mounting surface on the underside of the vehicle. The good news is that the steel the hitch is constructed of will serve the same purpose as the heat shield, which is to isolate the vehicle underbody from the heat generated by the exhaust. In other words, removing the heat shield to install the hitch will not have...
view full answer... - Carrying a Mobility Scooter with 2008 Dodge CaliberAlthough we don't have a carrier that would be compatible with any of the hitches available for your Caliber, we do have a solution that would allow you to transport your scooter. Your best bet for transporting the scooter with that vehicle would be to use a small utility trailer like # K2MMT5X7. To set your vehicle up for towing, you'd first need to install a hitch. As long as your Caliber isn't an SRT-4 model, you could use the Draw-Tite Class I hitch, part # 24769. The hitch does not...
view full answer... - Best Trailer Hitch and Wiring for 2018 Kia SoulThe best trailer hitch for your 2018 Kia Soul is the Draw-Tite # 24915 which fits all models of Kia Soul with the exception of the EV models. This hitch is your best option because of the reliability of Draw-Tite hitches when towing due to their welded steel construction. For wiring which will give your Kia a 4-way connector and allow you to power your trailer's lights I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118637 because it only requires you...
view full answer...
- Trailer Hitch Installation On 2015 Mitsubishi Lancer GTThe Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # 24885 is a confirmed fit for your 2015 Mitsubishi Lancer GT as long as you don't have the dual exhaust. There is no drilling required to install this hitch. The installation instructions state you will need a jig saw, cut-off wheel, or die grinder for enlarging the hole already present in the frame for the carriage bolt and block on the passenger side. I've attached the installation details which state...
view full answer... - Recommended Trailer Hitch Receiver and Trailer Wiring Harness for 2012 Ford Focus SEFor your 2012 Ford Focus SE, I recommend the Curt Trailer Hitch Receiver - Class I - 1-1/4" # C11158. This is a custom fit for both the sedan and hatchback as they install the same way and I've attached a video to assist. This is a no drill installation, but the heat shield underneath will need to be trimmed for fit. For your wiring, I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118548. This will install behind your tail lights to the factory...
view full answer... - Reese Swagman Outfitter 4 Bike Carrier Tow Ball for a 2011 Toyota Venza V6Your vehicle would be able to tow your tear drop trailer at 1,200 pounds with your Reese Outfitter bike rack. We carry a variety of tow balls but you first need to determine the diameter of the Reese bike carrier hole so it matches the diameter of the ball shank. Some common sized ball shank diameters we carry include 1 Inch # 63845, 1 1/4 inch # A-90, or 3/4 inch # 19258 diameter. The below video provides a good overview of one of these three.
view full answer... - Recommended Ball Mount for 2014 Toyota Prius with Class I Hitch ReceiverThe Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # 24847 is 11-3/4 inches from the ground to the inside top of the receiver. For your 4 inch rise, the Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K # 3593 which is what we typically recommend for this hitch is not going to get you there. The Draw-Tite Drawbar for 1-1/4" Hitches - 4" Rise - 10" Long - 2,000 lbs # 3594 is my recommendation for you because it give you the rise...
view full answer... - Trailer Hitch Receiver Fit for 2009 Mazda 3Yes, I can confirm that the Draw-Tite hitch you asked about does fit your 2009 Mazda 3: - Draw-Tite Trailer Hitch Receiver # 24816 To tow you will need the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118420 if your Mazda does NOT have LED tail lights or # 46255 if it DOES have LED tail lights. You will also need Ball Mount # 3592 and either 1-7/8" Hitch Ball # 19256, or 2" Hitch Ball # 19258. I have added links to video reviews for you to check out as well, including...
view full answer... - Recommended Trailer Hitch and Wiring for 2010 Hyundai AccentStarting with the trailer hitch for your 2010 Hyundai Accent, I do recommend the Draw-Tite Class I Sport Frame Receiver Hitch # 24795 referenced in your question. This is a Class I hitch that will provide a towing weight capacity of 2,000 pounds. I like this model over the Curt alternative also confirmed to fit your vehicle because unlike Curt, Draw-Tite does not require the use of stabilizing straps like # 18050 with non-trailer loads such as bike racks and cargo carriers. After your move...
view full answer... - Will Curt Trailer Hitch C11281 Fit a 2013 Dodge Dart SXT Rally with Dual ExhaustI checked with Curt and trailer hitch # C11281 will fit all models of the 2013 Dodge Dart including those with dual exhaust. I have linked the installation instructions for you. If you are planning on doing some towing check your owner's manual for the towing capacities of the vehicle. If none are listed, then contact Dodge to determine what the capacities are if there are any. If you can tow, then the correct ball mount to use is # 3592. For a 1-7/8 inch ball use # 19256 and for a 2-inch...
view full answer...
Do you have a question about this Trailer Hitch Ball?
Info for this part was:
Installed by:
Joe V
Installed by:
Bradley B
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Video Edited:
Jacob T
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Brian T
Updated by:
Matthew E
Updated by:
Noah M
Video by:
Dustin K
Video by:
Alan C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Brooke M.
9/22/2023
I will have our customer service team reach out to you about this. We definitely want to make sure you get all the parts that you ordered!