Combination LED Trailer Tail Light - Submersible - 7 Function - 14 Diodes - Driver Side
(422 reviews)
Price: $19.94
In Stock
Combination LED Trailer Tail Light - Submersible - 7 Function - 14 Diodes - Driver Side
Item # STL9RB
Retail:$55.23
Our Price: $19.94
You Save: 64%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (422)
- Q & A (0)
- Photos
Optronics Trailer Lights - STL9RB
- Tail Lights
- Square
- LED Light
- Red
- 5L x 5W Inch
- Surface Mount
- License Plate
- Rear Reflector
- Side Marker
- Side Reflector
- Stop/Turn/Tail
- Submersible Lights
- Optronics
5-1/16" x 4-9/16" Square. Waterproof trailer light serves 7 functions: stop, turn, tail, rear reflex, side marker, side reflex, and license plate light. Durable plastic housing. Stud mount on 2" centers. 3-Wire design.
Features:
- Square trailer light serves 7 functions
- Stop light, turn signal light, tail light, rear reflex reflector, side marker light, side reflex reflector, license plate light
- Built-in reflex reflector removes the need for a separate reflector
- Sealed, waterproof construction is submersible
- Durable surface-mount technology (SMT) construction of LED circuit board
- Better withstands shock and vibration
- Allows for improved heat distribution
- LEDs make great replacements for incandescent lights
- Last 50 times longer
- More efficient - provide better light with less power output
- No bulbs to replace - no brittle filaments
- Molded plastic housing and durable acrylic lens
- Red lens over white LEDs
- Stud mount with included hardware
- 3-Wire pigtail
- White wire is the ground
- Brown wire is for the tail lights
- Yellow wire is for the stop and turn lights
Specs:
- Configuration: driver's side
- Passenger's side: STL8RB (sold separately)
- Dimensions: 5-1/16" wide x 4-9/16" tall x 2-5/8" deep
- Light face: 4-9/16" wide x 4-9/16" tall
- Distance between mounting studs (center on center): 2"
- Diodes: 14
- Power draw at 12.8V:
- Stop light: 0.259 amps
- Side marker light: 0.062 amps
- Lifetime warranty on LEDS
Sealed, Waterproof Trailer Light
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The circuit board is sealed, which means that water will not damage the diodes or circuit board.
STL9RB Optronics Combination LED Taillight with License Plate Illuminator for Trailers Under 80" - Red lens - 14 Diodes
Alternate part number: STL-9RB
California residents: click here
Customer Satisfaction Score:
100% were satisfied with this product
0% of customers were not satisfied
- Product did not meet expectations
- Wrong item was ordered
Customer Reviews
Combination LED Trailer Tail Light - Submersible - 7 Function - 14 Diodes - Driver Side - STL9RB
Average Customer Rating: 4.8 out of 5 stars (422 Customer Reviews)
5-1/16" x 4-9/16" Square. Waterproof trailer light serves 7 functions: stop, turn, tail, rear reflex, side marker, side reflex, and license plate light. Durable plastic housing. Stud mount on 2" centers. 3-Wire design.by: Don06/21/2017
Perfect replacement for factory installed lights.
Was able to use factory drilled mounting holes.
Installed in less than 45 minutes. Much brighter than original lights. I believe that they should provide many years of trouble free use.
by: Bryan04/20/2024
Beautiful tail light. Very bright for the brake and turn signal. Fitted it on the back of my trailer with an L bracket.
by: John 04/22/2024
Tired of dealing with corroded bulbs so bought these LED units. Same 2" bolt spacing as old one so easily mounted. Spliced wire connections and works great. Super bright! Will see how it holds up to weather. Hopefully will never have to touch it again.
by: Ed03/08/2024
First set of submersible trailer light that have lasted the rigors of salt water. Highly recommend this product
by: David 01/02/2024
My mistake, thinking they were identical and reversible. That is why they specify drivers and passenger side. Ordered another one and will be all set.
by: Brian12/15/2022
Nice and bright , worked great for my flatbed upgrade .easy website and easy shipping. Ordered from this company for a few years and have never had an issue
by: Gary02/13/2024
still the wrong part, your picture of this part shows a base (where the hole is) shows 3" the one you sent is 2". confusing. need 3" base.
by: Robert04/10/2018
Very impressed! Ordered the STL9RB and the other side twin STL8RB. Etrailer shipped the wrong twin. One phone call and 5 minutes later, the correct part was shipped!
The LED tail lights and side markers (MCL82ADB Optronics LED Surface Mount Marker/Clearance Lights with Reflex) are for a home-built cargo trailer. Decent build, waterproof, and the plastic is of a heavy gauge to last a long time in the Arizona sun. These units are equipped with LED's, and should last a long time.
Thanks etrailer!
Robert B.
4/10/2019
One year in, and tail lights are still holding up well in the Arizona sun . . . . . :-
by: Karl08/26/2017
Had to replace the tail light on my motorcycle trailer that vibrated and broke on my last trip (different manufacturer). Just completed a 500 mile trip, including periods of rain. No problems at all. Grat product.
by: David V04/20/2020
I installed lights on boat trailer in May 2019...
Launched boat several times with water covering lights.
Stored boat and trailer outdoors all winter of 2019/2020.
April 19, 2020 I took boat and trailer to marine shop for maintenance.
LIGHTS WORKED WITHOUT AN ISSUE!
Thank you for selling a reliable, quality product!
David V.
4/21/2021
Lights still work perfectly after heavy snows during 2020 2021 winter outdoor storage.
by: David 02/23/2024
GOOD LIGHT WORKS GREAT
by: Barry 07/22/2023
The trailer light assembly is exactly the one needed to replace the one on my 19 year old boat trailer.
The assembly arrived in a timely manner and is the one shown on the company web site.
by: Brandon 03/21/2024
Exactly what I ordered, very simple and bright!
by: Glenn 02/29/2024
It is the correct item
by: Andy 02/04/2024
Great lights. Nice and bright
by: Robert 02/03/2024
worked great
by: John11/04/2017
Good product, good service, prompt delivery, personal touch with etrailer.com
by: Darwin10/03/2023
They work as intended. Have to make sure of proper ground.
by: John R.11/06/2017
Very nice lights for the price. They were easy to install and the mounting bolts fit right into my existing holes from my "different brand" lights that were damaged. They are very bright! Not sure if they are "truly" submersible like the add says, as the wires simply go through a manufactured hole in the back of the case, so the wiring inside must be sealed. Either way, I just filled this hole with some regular silicone caulk. As with all trailer lights I would recommend buying or making light guards, as these lights can break easily. Overall I am happy and would definitely recommend!
John R.
11/6/2018
Thank you! The lights are great, no issues at all, and tough as nails!!! I have them on a 10k 6x10 dump trailer, that I beat the snot out of, gravel logging roads, mud, snow, ice, driving through brush. I just wish my trailer tires were as tough as those lights. Thanks again, and if I ever need anything for my trailers, I will be shopping etrailer!!!
by: Bruce02/22/2018
STL9RB & STL8RB Trailer tail-lights. Removed old standard bulb tail-lights, from my small "runaway" camper trailer, and replaced them with these LED tail-lights. The LED lights are much brighter than the old lights. Installation was easy. Followed the instruction video. It took me about twenty minutes from start to finish. They work great and look great.
Bruce
2/22/2019
Still working great.
by: Jim12/10/2017
Installed this and several other lights on a new trailer. Factory lighting and wiring left a lot to be desired, and with the help of etrailer.com I was able to get everything fixed up like I wanted.
Lights work very well - clear and bright red tail and turn/brake lights.
Jim
12/10/2018
All of the products I purchased its been about 2 years now are still working great. Thanks for checking in.
by: Winsel S.11/12/2015
Looks Great! Works Great! These were added to a 14' Kaufman Dump Trailer that I wanted to use as a utility trailer also, but when completely tarped, the brake/tail/turn lights were covered. So, I added these lights to the side of the frame so that they could be seen when the trailer was securely tarped.
Winsel S.
12/31/2016
I still love the products purchased
by: Dennis D.07/21/2014
Put these lights on my trailer 1 year ago. Used trailer 1/2 doz. times since the install. This weekend find that the left light running light is out. The right light 1/2 the LED's are out. I had my old $6 units on there for 16 years. Obviously got better service from them.
Patrick B.
7/23/2014
One of our Customer Service reps, Nikki, has sent you an email about the warranty policy. The LEDs in these lights are covered by a limited lifetime warranty. Check your email for more information on getting the bad lights to us so we can send you new ones.
by: Glenn A09/13/2023
Excellent product at a great price.
by: JW07/16/2013
Appears to be of excellent quality and fit. Easy replacement of old bulb type lights. Everyone should retro their lights to LED's. Big safety improvement. Don't have a report on how submersible/water tight these lights will be yet.
Jw
7/16/2014
Nothing to add, but.... awesome. they are bright and work fine on the boat trailer, even after several dunkings in the lake.
25
422
Show More Reviews
See what our Experts say about this Optronics Trailer Lights
- Passenger Side Trailer Taillight Recommendation to Match Driver Side Taillight # STL9RB The passenger side trailer taillight to match the part # STL9RB is the part # STL8RB.
view full answer... - Availability of LED Trailer Taillights That Can Replace 432000 and 431800We have LED trailer taillights that have the same 2 inches between the mounting studs like with the part # STL9RB for the driver side or part # STL8RB for the passenger side but we do not have LED versions of the # 432000 and # 431800.
view full answer... - Why is the Left Hand Light More Expensive than the Right Hand Light?The left hand taillight is more expensive because it contains more LED lights than the right side, due to the addition of the license plate light on the bottom of the light. The white LED is more expensive to produce also and that adds to the cost of the left hand light because the license plate lamps are white.
view full answer... - No Right Turn Signal Or Brake Light From T-One Converter on 2003 Jeep Grand CherokeeIt sounds like your converter has shorted and will need to be replaced. However, more than likely there is an issue on the trailer wiring or light that has caused the converter to short. You will want to check the trailer lights and wiring to make sure there is not any exposed wires or the bulbs need to be replaced. It could be that moisture got into the right side tail light when the trailer connector was connected to the vehicle, causing the converter to short out. This could happen...
view full answer... - Troubleshooting Left Side Running Light Problem on a Boat Trailer after Installing a New Tail LightIt sounds as if you either have a weak ground at the first light on the left side of the trailer that is not working or you have a broken or pinched wire on the left side after the light that is working. You have effectively eliminated the vehicle and trailer connectors by observing the fact that the first running light inline on the left side of the trailer is functioning properly and that all of the other trailer lighting is working. Start, by making sure the lights that are not working...
view full answer... - Left Handed, Submersible Trailer Light and License Plate Bracket RecommendationWhat you will need is a Over 80 inch Wide, Square Submersible Trailer Tail Light with License Plate Light, 8-Function, Left, part # ST5RB. For a license plate bracket you will need a Trailer License Plate Mount Bracket, Angled, Rust Proof Polymer - Black, part # LP10SB. If you need a right handed light, you would want a Over 80 inch Wide, Square Submersible Trailer Tail Light, 7-Function, Right Hand, part # ST4RB. The reason I recommend a different Tail Light from the one you referenced...
view full answer... - Can a Passenger Side Tail Light Be Used on the Driver Side of a TrailerLeft side tail lights have a clear lens on the bottom to light up the license plate. Right hand side tail lights do not. If you were to use the right hand side light, # STL8RB, you would need a separate light to illuminate the license plate. The left hand side light that matches is # STL9RB. If you click on the last picture on the product page, you will see the lens.
view full answer... - Installing LED Lights On Trailer Connected to 2003 Dodge Dakota with Incandescent LightsThe 2003 Dodge Dakota does not have a converter box as a part of the trailer wiring. Here is where confusion comes in and where ambiguity comes. Some LED lights may have zero issue plugging directly into the system based on the trailer length, ground connections, and number of LED's in each light fixture. Due to enough power draw. Other trailers may not have enough power draw and may have hyperflashing issues requiring load resistors either on each line or through a converter like #...
view full answer... - LED Trailer Taillight Replacement RecommendationLED lights are more durable and can withstand more than incandescent bulbs. Regular bulbs are pretty fragile by comparison. That is not to say that the LEDs are indestructible but they will hold up better than regular bulbs. I attached a page that has all of the LED trailer taillights we offer that could possible fit. The part # STL8RB and # STL9RB are very popular options that you might consider. I attached an install video for these lights for you to check out as well.
view full answer... - What Is Wire Size For Parts And Recommended ConnectorsI called the manufacturers to confirm wire sizes. The Optronics lights, Item # STL9RB and Item # MCL76AB, will have 20-18 gauge wires. The Electric Trailer Brake Kit, Item # AKEBRK-35, will have 12-10 gauge wires. I recommend using the Deka Heat Shrink Butt Connectors. For the 20-18 gauge wires this will be Item # DW05743-10 and for the 12-10 gauge wires it will be Item # DW05745-10. If you need additional wire for your project, Item # 10-1-1 and Item # 10-2-1 are available. I...
view full answer... - Recommended Taillight for Redline LG440NP Guard for Trailer Taillights The Redline # LG440NP steel trailer lamp box works well with the Peterson # 432400 driver's side and # 432200 passenger side incandescent taillights, but I'd recommend going with LED taillights because they draw less power, are brighter and last a heckuva lot longer. If you want to go that route, use # STL9RB for the driver's side and # STL8RB for the passenger side. Per the product description, you'll need to cut a slot in the underside of the lamp box on the driver's side so the license...
view full answer... - Submersible Right Hand LED Trailer Tail Light RecommendationIf you want a submersible tail light I would recommend the LED Submersible Trailer Stop, Turn and Tail Light, 6-Function, 11 Diode, Right Hand, part # STL8RB. The # STL28RB you referenced is not submersible, and I would not recommend it if you need a submersible tail light. You may also be interested in the LED Submersible Trailer Stop, Turn, Tail and License Plate Light, 7-Function, 14 Diode, Left Hand, part # STL9RB, if you needed the left hand version of the # STL8RB.
view full answer...
- Does Optronics LED Submersible Trailer Light # STL8RB Offer License Plate IlluminationThe Optronics LED Submersible Multifunction Trailer Light # STL8RB that you referenced is a right-hand light and does not include the clear down-facing lens for illuminating your license plate. However, the matching left-hand light from Optronics, part # STL9RB, does include this function. Please refer to the linked photo which shows the underside of part # STL9RB. We also offer a rustproof polymer License Plate Mount Bracket, part # LP10SB from Optronics, to allow installation of both...
view full answer...
- Left Hand Trailer Taillight Assembly to Match the STL8RBFor the matching taillight assembly for the # STL8RB you would want the part # STL9RB. I attached an install video for these lights for you to check out as well.
view full answer... - Are the LED Trailer Tail Lights # STL8RB and # STL9RB the Same Just for Different SidesYes, the LED Trailer Tail Lights # STL8RB and # STL9RB are the same light. Part # STL8RB is for the passenger side of the trailer while part # STL9RB will install on the driver's side. You can also find these LED lights in the Kit # TLL9RK which will provide you with a wiring harness with connectors, a license plate mounting bracket, as well as hardware and quick-splice connectors needed to install the parts.
view full answer... - What are the Measurements of Optronics Replacement Side Marker Lens # AL9RBI went out to the warehouse and pulled the Optronics Replacement Side Marker Lens # AL9RB. It measures 2-13/16 inches across, 2-1/8 inches tall, and it is 3/16 of an inch thick. The mounting holes are 2-5/16 inches apart on center. The lens is for # STL8RB and # STL9RB lights which no longer use a gasket. The LED light system is encased (sealed) in plastic making the LED light fixture itself waterproof.
view full answer...
- Passenger Side Match for Trailer Tail Light # STL9RBThe counterpart to the Trailer Tail Light 7-Function # STL9RB is the Trailer Tail Light 6 Function # STL8RB. The function that passenger light does not have that the drivers side does have is the License Plate function. The power from the drivers side light handles that function.
view full answer... - Matched Pair of Optronics LED 7-Function Trailer Tail LightsYou can use Optronics Trailer Tail Light # STL9RB as the match for the passenger-side light # STL8RB. These high-efficiency LED lights will provide both brighter output and reduced power demand as compared to standard incandescent lights. Both are stud-mount lights that use a 3-wire design.
view full answer... - Lens Replacement Recommendation for STL8RB and STL9RBYes we carry replacement side lenses for the part # STL8RB and # STL9RB. For that you would want the part # AL9RB. For a replacement front lens you would want the part # A8RB.
view full answer... - Raft Trailer Left Tail Light is Brighter and Turn Signal Does Not Work with Vehicle Lights OnEven though you have checked the grounds this does still sound symptomatic of a ground problem. Ground problems normally show up when there is more draw on a system such as when you have the running lights on and then use another function like a turn signal or brake light. Also make sure that the new light wires are connected to the correct wires on the trailer. The back of the light housing should indicate the function of each wire. For example, light # STL9RB uses yellow for left turn...
view full answer... - Replacement Tail Lights For a 2004 Sea Lion Boat Trailer S 16-1500 Thank you for the picture that is very helpful since I cannot always see what trailer manufacturers used on their trailers. The LED Combination Tail Light Kit # TLL9RK may be your best option depending on the condition of your current wiring. This kit includes both tail lights, a license plate bracket and 25' of wiring for the tail lights. If your wiring is still in good condition the Drivers # STL9RB and Passengers # STL8RB side tail lights are available separately. I do recommend using...
view full answer...
- Replacement STL8RB Tail Lights for Utility TrailerFor your utility trailer, I recommend the Optronics Trailer Tail Light # STL8RB for the Passenger Side and # STL9RB for the Driver Side. These are direct replacements for your existing lights and will work perfectly on your trailer. These assemblies are 5-1/16 inches long and 4-9/16 inches wide. I have attached an installation video on these tail lights that you can also take a look at.
view full answer... - Replacement Tail Light Assemblies for 1976 Argosy CamperThe issue that you're going to run into here is that the lip that you removed is designed to allow you to mount lights on the back because of the curved ends. Because it's such a smooth curve there, you're not going to be able to use something like the Bargman Wraparound Clearance/Side Marker Light - 86 Series - Red - Black Base # 30-86-202. With that said, I'll mention two options for you that you could likely make work by moving the electrical wiring in a bit. First, you could use the...
view full answer...
- Troubleshooting Trailer Lights not Working with 2009 Honda PilotThis is an issue we run in to quite commonly when installing Combination LED Trailer Tail Light part # STL9RB or any other trailer light. The good news it has nothing to do with the vehicle 99% of the time. The most common cause for this is bad grounding at your lights or at the wiring harness ground. When this came into the shop my first step would be to remove sand down to good steel and replace each ground. That will likely solve your issue. The very dim light coming through is an indication...
view full answer...
Do you have a question about this Trailer Light?
Info for this part was:
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Sarah H
Updated by:
Adele M
Updated by:
Laura H
Updated by:
Amy B
Updated by:
Wilson B
Updated by:
Brian T
Video by:
Kathleen M
Video by:
Zach D
Video Edited:
Dustin K
Video Edited:
Chad S
Installed by:
Cole B
Installed by:
Randy B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Don
6/21/2018
Its been about a year, the lights have gone through all four seasons here in Minnesota and continue to function flawlessly. They have been a great investment saving me the time and effort needed to replace light bulbs.