Curt Adjustable Trailer Hitch Receiver - 18"-51" Wide - 2" Drop - Class III - 2"
(47 reviews)
Price: $284.39
In Stock
Curt Adjustable Trailer Hitch Receiver - 18"-51" Wide - 2" Drop - Class III - 2"
Item # C13701
Retail:$415.95
Our Price: $284.39
You Save: $131.56
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (47)
- Q & A (0)
- Photos
CURT RV and Camper Hitch - C13701
- Frame Mount Hitch
- 18 - 51 Inch Wide Frame
- 5000 lbs GTW
- Bolt-On
- Weld-On
- 2 Inch Hitch
- 500 lbs TW
- CURT
Adjustable trailer receiver hitch is designed for use on RVs and can be bolted to the vehicle frame or welded on for a no-drill application. Provides a 2" drop to fit your application. Powder coated steel is sturdy and corrosion resistant.
Features:
- Universal hitch designed for use on RVs and motorhomes
- Heavy duty frame side brackets are separate parts to allow you maximum adjustability
- Frame brackets with hitch tube mounts slide along hitch body to match exactly the width of your vehicle frame before being secured in place
- Versatile brackets are able to be used on various vehicle frame styles - Box frame, C-Channel frame, or I-Beam frame
- Separate frame brackets allow you to position the tube mounts toward the front or rear, putting the hitch body in the best location for clearance
- Black powder coat finish resists rust and corrosion
- Strong, secure all-frame attachment
- Solid construction for maximum strength and safety
- Hardware is included
- Assembled in the USA
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 5,000 lbs
- Maximum GTW when used with weight distribution: 6,000 lbs
- Maximum tongue weight: 500 lbs
- Maximum TW when used with weight distribution: 600 lbs
- Maximum gross trailer weight: 5,000 lbs
- Drop: 2"
- Frame width:
- Minimum: 18"
- Maximum 51"
- Bracket thickness: 1/4"
- Limited lifetime warranty
Notes:
- Any accessory used with this hitch much be approved for use with RVs.
- If welding this hitch, all welding surfaces must be cleaned to bare metal or weld will not be the required strength and may void the warranty.
- The main hitch body tube can be trimmed so the ends are flush with the frame brackets. After trimming, coat the bare metal with paint to protect against rust and corrosion.
13701 Curt Class 3 Adjustable Width Trailer Hitch Receiver for RVs - 18" to 51" Wide - 2" Drop
Installation Details
Customer Satisfaction Score:
86% were satisfied with this product
14% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Arrived Damaged
Customer Reviews
Curt Adjustable Trailer Hitch Receiver - 18"-51" Wide - 2" Drop - Class III - 2" - C13701
Average Customer Rating: 4.7 out of 5 stars (47 Customer Reviews)
Adjustable trailer receiver hitch is designed for use on RVs and can be bolted to the vehicle frame or welded on for a no-drill application. Provides a 2" drop to fit your application. Powder coated steel is sturdy and corrosion resistant.by: William05/01/2018
I've used Curt products before and this one did not disappoint. The packaging however was not up to the task. The box was open and I immediately started inspecting for damages and missing parts, thankfully the packer from etrailer completely wrapped the loose parts in reinforced tape and everything was there.
by: Gary 05/02/2024
good product, easy to figure out, many options, easy to install
by: Roy 05/02/2024
And again- another order delivered accurately and precisely as specified- thank you so much!
by: Calvin06/13/2018
The hitch that we ordered was shipped the day of our order and came very quickly. The installation process was simple and worked very well on our bus. This gives us the capability to tow a small trailer to carry our luggage for the youth conferences that our teens attend throughout the year.
by: Keith 12/02/2023
Got it, looks like everything is there, the box didn't hold up to well to the ups shipping, typical, a smaller box packed with foam and bubble wrap may work better
by: Mike 09/24/2018
Well built product. Easy install, took about 1 hour mostly for drilling holes. Be sure you have at least 2 brill bits for each size required.
by: Bill L.10/19/2015
Received quickly and was just what I needed to solve my storage needs. Looking forward to putting it on my 5th wheel in the coming weeks.
Bill L.
10/18/2016
Worked great for the application needed.
by: Theo08/27/2015
Ordered this to retro fit a Class III hitch on a '63 Willys truck. So far it works perfectly. Was able to attach it directly to the frame and not lose any functionality. Also ordered C45791 Hitch extender and won't need it with this setup. All parts were included and the install instructions were clean. eTrailer also did a great job of assisting with the order to ensure that it got to me as quickly was possible.
by: Jason10/11/2017
I actually ordered the wrong hitch; however, gave to a friend that needed one. He likes it. I ordered the same hitch but the 71 or 72 inch span. Had to customize the mounting to the fifth wheel camper as the camper had electric stabilizers installed. Anyway, works well, tow an 18ft deep V boat behind camper.
by: Robert10/07/2020
Had it welded to the back of my pull trailer to hold a wire rack. Holds my camping chairs and dog enclosures, works great
by: Don 08/08/2021
Hitch worked out great. Mounted it on the back of my 5th wheel. Use it to tow a Kubota RTV or my dog trailer.
by: Rick08/17/2017
I received the hitch on time and installed it with no problems at all.
Thanks!
Rick
8/17/2018
Our hitch has worked great! We pull our Jeep Wrangler behind or class A gas motorhome without any issues.
by: James 07/18/2022
Bought this to put on the back of my fifth wheel for bikes and the product is well made and instructions were good.
by: 06/09/2023
Good hitch easy install just drill some holes and bolt it on.
by: Dale 09/25/2022
Very pleased with this hitch, it fits my Thomas HDX bus with very little modification. only had to drill two additional holes in the frame. extreamly rugged and up for the job.
by: Keith08/04/2018
Delivery was fast.The mirrors worked out great .Easy install on my 1967 Galaxie.Trans cooler was a pretty quick installation really good instructions.The trailer hitch required a bit of work but was definitely worth it ! I'm 70 years old and didn't have a difficult time with these products.Will definitely use your products again.
by: Douglas 12/02/2019
Had looked for a hitch to fit a 36 inch plate on my converted bus/ rv. Found this one that is adjustable on etrailer.com. I ordered and received in great packaging. Very quick turn around from order to receiving. Thank-you!
by: William12/07/2022
We are very happy with the hitch, etc we purchased from you . Worked out well, and you folks were very helpful. Thank you!
by: Marco 02/21/2023
Parts were as described, delivered promptly, and installed easily!
by: Barry L08/23/2018
Excellent service
Cathy knew just what I needed for my rv
Shipping two days unbelievable now that's fast
Great price for the product I ordered
Thanks again Cathy and etrailer
Will be back and my friends
by: Drew 06/12/2020
Product was as advertised, great!
Dena was particularly helpful and friendly.
Wish I needed more trailer parts, will use them in the future!
by: Douglas09/20/2018
Very heavy duty bolt on application, just make sure you have 9/16 and 11/16 bits.
If not add another $35 to your project.
I Like it.
by: Rick06/17/2019
Purchased this for a 1977 GMC coachman 24' Motor Home. Was not able to bolt on with out a bit of metal fabrication. Great product.
by: David h03/27/2017
Adjustable hitch everything there supposed to b and got it quickly very pleased
by: Tom G05/16/2020
Great product and super service at a fair price
Tom G.
5/17/2021
Perfect! No issues
25
47
Show More Reviews
See what our Experts say about this CURT RV and Camper Hitch
- Trailer Hitch to Carry Motorcycle for 1989 Collins/E-350 School Bus It's tough to tell from your picture which part of the frame I'm looking at, so if you can provide me with some more information on if that is a picture of the rear of the bus and those points on the frame are where you're mounting, I can give you an answer with 100% certainty. The Draw-Tite Multi-Fit Motor-home Trailer Hitch # 5350 will fit as long as there is 5-1/2" of height inside the frame to mount the bracket into. The one thing that worries me with the Draw-Tite hitch is that there...
view full answer...
- 2018 Grand design Solitude 373FB tow receiverThe only weld on option we offer that could accommodate a 74-1/2 inch span like what you describe is the # UF35-946403. This item has a 350 lb tongue weight capacity and isn't designed to be used for towing, The Lippert part you mentioned has a 300 lb tongue weight and a 3500 lb towing capacity.
view full answer... - Recommended Trailer Hitch Receiver for 5th Wheel to Pull Utility or Boat TrailerThe Adjustable Width Trailer Hitch Receiver for RVs, 18" to 51" Wide # C13702 or the Curt Adjustable Trailer Hitch Receiver - 18"-51" Wide - 2" Drop - Class III - 2" # C13701 are going to be the best option for your 2012 Keystone Alpine 300RE 5th Wheel. These are both rated for 5,000 lbs towing capacity or 6,000 lbs when using weight distribution which it sounds like will be more than enough for your needs.
view full answer... - Hitch for 1992 Toyota Hiace IH113I don't think an exact fit hitch is sold in the USA for your Toyota Hiace. You should take a look at the Curt # C13701 adjustable hitch. This hitch can be adjusted for width and then welded or bolted onto an existing frame. I have attached a video review of this product.
view full answer... - Bolt On Trailer Hitch Receiver for 2015 Ram Promaster 2500 Extended Body with Knapheide KUV BodyYour best option for your Knapheide KUV Body is to use an RV hitch that can bolt on as there are not custom fit options for your application from any of our manufacturers due to the extended wheel base. I recommend the Adjustable Width Trailer Hitch Receiver for RVs, 18" to 51" Wide # C13702 or the 2 inch drop # C13701.
view full answer... - Frame Mounted Trailer Hitch for an RVYou can use the Curt Adjustable Trailer Hitch Receiver # C13701 if the distance between the frame on your 2011 Forest River Wildcat is between 18" and 51" or the Adjustable Width Trailer Hitch Receiver for RVs # C13704 if it is between 22"and 66". Either option will provide you with a 2" hitch that has a 500 lbs. tongue weight capacity and 5,000 lb. gross trailer weight capacity. Towing your boat behind your 2011 Forest River Wildcat would be an example of triple towing which is not recommended...
view full answer... - Recommended Trailer Hitch Receiver Compatible with 1997 Winnebago Vectra Grand Touring and WD SystemThe Curt Adjustable Trailer Hitch Receiver - 18"-51" Wide - 2" Drop - Class III - 2" # C13701 is a great option for your 1997 Winnebago Vectra Grand Touring. This is rated for 5000 lbs towing capacity without weight distribution or 6000 lbs with a weight distribution system. Your weight distribution system needs to be in the middle range of the system ideally for the total tongue weight. The total tongue weight is the loaded trailer weight along with any cargo weight behind the rear...
view full answer... - Can Curt Hitch 13701 Fit 2021 Geo Pro 19FBSBased on our pictures the Curt adjustable RV hitch part # C13701 would not fit as-is. You'd have to relocate the stabilizers closer to the front of the RV.
view full answer...
- RV Cargo Carrier Solution For A Trailer That Has A Deeper BumperThanks for the picture, and the measurements! I took a look at your bumper, and it doesn't appear that the Mount-n-Lock GennyGo Generator and Cargo Carrier for RV Bumpers # MNT54FR will be a good fit for you. This cargo carrier will fit square and rectangular RV bumpers with a maximum depth of 6", and since you mentioned that your bumper is a notch over 7", this will not work. The best option I can offer for you, is to use a hitch mounted cargo carrier like the 22-1/2x49 Curt Cargo Carrier...
view full answer...
- Is It Possible to Install Trailer Hitch on 2006 K-Z Escalade TrailerIt is absolutely possible to install a trailer hitch on your 2006 K-Z Escalade trailer; it will only require that your trailer have a box frame, C-channel frame, or I-beam frame that is between 22 inches and 72 inches wide. Should your trailer have that you will be able to use the Adjustable Width Trailer Hitch Receiver for RVs # 13703 which will can either bolt or weld onto your trailer's frame. This is a Class III hitch with a 2 inch receiver but please keep in mind it will require the...
view full answer... - Trailer Hitch for Use on 2011 Country Cruiser Camper to Pull Small Utility Trailer for Golf CartWe offer two types of trailer hitch for use on the back of a trailer, bumper-mount and frame-mount. A bumper-mount hitch like Ultra-Fab # UF35-946402 bolts on to your 4 x 4-inch continuously-welded bumper with included U-bolt hardware and provides a 2-inch receiver opening for use with accessory items like a bike rack or for light towing. An example of a frame-mount hitch is Curt's Adjustable Width Trailer Hitch # C13701 that fits to trailer frame widths from 18- to 51-inches. All such...
view full answer... - Can a Small Duck Boat Be Pulled Behind a 2022 Forest River Work and Play Toy HaulerIn most states double towing (towing one trailer behind another) is illegal so you will want to ensure that it is legal in the state you live in and any state you plan to travel in. You will also want to check with Forest River to ensure that the bumper/frame is rated for pulling a trailer and that you won't be voiding any warranties. That being said, if that all checks out then you would definitely want to go with a frame mounted hitch and not a bumper mounted hitch. If the frame members...
view full answer... - Front Mount Hitch Fitment on a 2020 Coachman Leprechaun with Chevy 4500 Cutaway ChassisThanks for reaching out! While I do have a possible solution for you, there aren't any custom fit front mount hitches designed for your 2019 Chevy 4500 Cutaway Chassis so for your application you'll need to use an adjustable hitch like the Curt # C13701. This will require you to trim the crossbeam of the Curt hitch as well as figure out how to fit it to your Chevy so if this isn't something you're comfortable with I recommend having a shop help you out with it. Attached is a review video...
view full answer... - Mounting a Hitch and Bike Rack on the Back of a Pop-Up CamperWe do have hitches available for campers like your 2019 Coachmen Viking LS Camper. These hitches mount to the frame, so you'll need to take that measurement into consideration. I recommend the Curt Adjustable Class III, part # C13701. It adjusts from 18" to 51" and mounts to box frames, C-channel frames, or I-beam frames. It has a 2" receiver and can be bolted or welded on. I've linked to a video review of this below. As for your bike rack, I was unable to find out if yours is compatible...
view full answer... - Recommended Bike Rack To Carry 2-4 Bikes On a 5th WheelThe bike rack I recommend for a 5th wheel for carrying between 2 and 4 bikes is the Swagman 4 Bike Carrier RV Mounted Bike Rack part # S80600 because it attached directly to a standard 4" x 4" rear square bumper without a hitch required which usually requires cutting and drilling. This is a great cost effective option that works well for most trailers.
view full answer... - Recommended 4-Way Connector For 5th Wheel Trailer Towing Small Utility TrailerThe Curt Adjustable Trailer Hitch Receiver # C13701 you were looking at is a great option for adding a trailer hitch receiver to your 5th wheel trailer as long as the inside of the frame rails is between 18"-51" wide. To add a 4-way connector to your 5th wheel trailer to power the the trailer lights on your small utility trailer you will want the 4-Pole Hardwire Kit with Circuit Tester # 18252. Using the included circuit tester to verify the functions of the wiring on your 5th wheel trailer...
view full answer... - Compatibility of Rear RV Trailer Hitch Receiver for 2017 Prime Time Crusader Lite 28RLYour 2017 Prime Time Crusader Lite 28RL trailer according to the manufacturer was not designed to accommodate the addition of a hitch to the rear bumper or frame. So they will not warranty the addition of the Curt RV Bumper 2" Trailer Hitch Receiver # E-100 or the addition of a hitch like # C13701. You will need to weigh the risk when desiring to tow as most 5th wheel trailers and these hitch options would allow for that utility trailer with ATV towing or small aluminum boat. The hitches...
view full answer... - Trailer Hitch for my Boat TrailerWhile the Curt Adjustable Trailer Hitch Receiver part # C13701 is designed to attach to trailers it is a 2" receiver tube opening. I do not have any adjustable width hitch with an 1 1/4" opening. I strongly recommend checking with the trailer manufacturer to ensure what kind of weight capacity the trailer may have at the rear and use their recommendation as your maximum capacity.
view full answer... - What Hitch Receiver Will Fit My 1998 VW Rialta RVIf it is confirmed that your RV can handle a hitch receiver, you can install something like the Curt Adjustable Trailer Hitch Receiver - 18"-51" Wide - 2" Drop - Class III - 2", part # C13701. This hitch receiver will fit RV's with frame widths of 18" - 51". This is a bolt on hitch receiver. You will have to contact your RV manufacturer with the VIN to find out the RV's towing capacity and tongue weight, if you do not have the information in your owner's manual. I have included a product...
view full answer... - Is There a Front Mount Hitch for a 2012 Hyundai Santa FeTo install a front hitch on your 2012 Hyundai Santa Fe you'll need to use a universal kit like the Curt Adjustable Trailer Hitch Receiver # C13701 since there are no custom fit options available. This hitch fits 18"-51" wide vehicle frames and features a 2" drop and a 2" receiver which fits basically anything you'll be putting at the front of your vehicle. Aside from this you'll have to take your vehicle to a shop and have them custom fabricate something for your vehicle.
view full answer... - Will the Curt Adjustable Trailer Hitch Fit A 21' Bumper Pull Trailer?Yes, the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide # C13704 is designed to be either bolted or welded on, and will work just fine with your 21' bumper pull camper trailer. This hitch is designed to fit trailers that have a frame width of 22" tp 66", a maximum weight capacity of 5,000-lbs, and a maximum tongue weight capacity of 500-lbs. If you need a hitch that fits a wider framed trailer, you can check out the: Adjustable Width Trailer Hitch Receiver for RVs #...
view full answer... - Hitch Recommendation for a 2016 Artic Fox 25W Travel Trailer for Transporting Bike RackWe have great universal hitch options for you. Although, it depends on the measurement of your frame width on your 2016 Artic Fox 25W travel trailer. For some great options, I recommend either of the following: - Adjustable Width Trailer Hitch Receiver for RVs # 13703 - Curt Adjustable Trailer Hitch Receiver # C13701 Both of these Curt-brand hitches include adjustable brackets for a bolt-on or weld-on application. For the # 13703, that hitch fits trailer frames between 22" - 72" while...
view full answer... - Recommended Trailer Hitch Receiver for 1962 Aloha Trailer with 3x1.5 C-Channel Bumper?There isn't a bumper mount option for that 3 x 1.5 inch c-channel. Instead you will need to use a frame mounted hitch like the Curt Adjustable Trailer Hitch Receiver - 18"-51" Wide - 2" Drop - Class III - 2" # C13701. This is a bolt on option that will work with Box frame, C-Channel frame, or I-Beam frame.
view full answer... - Trailer Hitch for 2005 Thomas Saf-T-Liner HDX Rear Engine Bus for Use with Hitch Motorcycle CarrierWe do have multi-fit RV hitches like the Curt # C13701 that you referenced but none of these has the req
view full answer...
Do you have a question about this RV and Camper Hitch?
Info for this part was:
Expert Research:
Jackie C
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Written by:
Laura H
Installed by:
Cole B
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
William
5/14/2018
All set up, ready to roll. etrailer got me everything I needed hitch to brake control. Thank you your customer service was great!