bing tracking image
  1. Trailer Lights
  2. Optronics
  3. Tail Lights
  4. Rectangle
  5. LED Light
  6. Red
LED Combination Trailer Tail Light - 7 Function - Submersible - 23 Diodes - Red Lens - Driver Side

LED Combination Trailer Tail Light - 7 Function - Submersible - 23 Diodes - Red Lens - Driver Side

Item # STL57RB
Retail:$50.93
Our Price: $41.39
You Save: 19%
Trailer Lights
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
6-1/16" x 3-5/8" Rectangle. Waterproof trailer light acts as brake, tail, turn, side marker, side reflex reflector, rear reflex reflector, and license plate light. Mounts on surface of trailer - hardware included. 3-Wire pigtail. Great Prices for the best trailer lights from Optronics. LED Combination Trailer Tail Light - 7 Function - Submersible - 23 Diodes - Red Lens - Driver Side part number STL57RB can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (252)
  • Q & A (0)
  • Photos

Optronics Trailer Lights - STL57RB

  • Tail Lights
  • Rectangle
  • LED Light
  • Red
  • 6L x 3-1/2W Inch
  • Surface Mount
  • License Plate
  • Rear Reflector
  • Side Marker
  • Side Reflector
  • Stop/Turn/Tail
  • Submersible Lights
  • Optronics

6-1/16" x 3-5/8" Rectangle. Waterproof trailer light acts as brake, tail, turn, side marker, side reflex reflector, rear reflex reflector, and license plate light. Mounts on surface of trailer - hardware included. 3-Wire pigtail.


Features:

  • Rectangular trailer tail light serves 7 functions
    • Stop light, tail light, turn signal light, side marker light, side reflex reflector, rear reflex reflector, and license plate light
  • Sealed, waterproof construction is submersible
    • Light is designed specifically for boat trailers
  • LEDs make great replacements for incandescent lights
    • Last 50 times longer
    • More efficient - provide brighter light with less power output
    • No bulbs to replace - no brittle filaments
  • Plastic housing
  • Red and clear acrylic lenses
  • Mounts on surface of trailer
    • Hardware slides along rear channels so that you can adjust the position of the light
    • Stainless steel hardware included
  • 3-Wire pigtail
    • White wire is for ground
    • Brown wire is for the tail lights
    • Yellow wire is for the stop and turn lights
  • DOT compliant


Specs:

  • Configuration: driver's side (left-hand side)
    • Passenger's-side light (STL56RB) sold separately
  • Dimensions: 6-1/16" long x 3-5/8" tall x 2-1/4" deep
  • Mounting hole dimensions (center to center): 2"
    • Hardware size: 1/4-20 x 1" long
  • Diodes: 23
  • Power draw at 12.8 volts:
    • Stop/turn signal light: 0.268 amps
    • Side marker light: 0.059 amps
  • Quantity: 1
  • Lifetime warranty on LEDs


Optronics STL57 Series LED Combination Tail Light Diagram

Sealed, Waterproof Trailer Light

The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The circuit board is sealed, which means that water will not damage the diodes or circuit board.



STL57RB Optronics Combination LED Boat Trailer Tail Light - Submersible - 23 Diodes - Red Lens - Left Side

Compare to Wesbar 271585-01




California residents: click here


Customer Satisfaction Score:


Customer Reviews

LED Combination Trailer Tail Light - 7 Function - Submersible - 23 Diodes - Red Lens - Driver Side - STL57RB

Average Customer Rating:  4.8 out of 5 stars   (252 Customer Reviews)

6-1/16" x 3-5/8" Rectangle. Waterproof trailer light acts as brake, tail, turn, side marker, side reflex reflector, rear reflex reflector, and license plate light. Mounts on surface of trailer - hardware included. 3-Wire pigtail.

by:

I have been more than pleased with the quality and performance of the Optronics brand lights! These are no exception!

This tail light assembly is a direct replacement on my ShoreLander trailer. The running lights, including four on the side, are a nice feature. The brake/signal light are more intense as expected. Lastly, the dimensions and mounting holes allowed me to bolt them into place without issue!

I, like others, am amazed at the brightness of the lights. They are a huge upgrade over my existing incandescent lamps! I am looking forward to no more burnt/broken bulbs!

I have purchased Optronics tailslights in the past, and am purchasing again as I like the quality/performance of the taillight assemblies. I would buy again and I would recommend to others as well!

Timothy

5/27/2024

A year later and Ive had zero issues with these LED lights. All the individual LEDs continue to work and the brightness has not diminished over time! I have gotten several comments from fellow fishermen on these. They like that they fit nicely on my shorelander trailer and the brightness of the unit! Im extremely happy with these!



by:

Identical replacement of broken tail light. Excellent delivery time. Ordered 4/25/23 after 7:00pm and received 4/29/23 after 11:00am, using standard delivery. Already installed and ready to travel. Thanks e-trailer.

David

4/30/2024

Excellent



by:

Great replacement for the original incandescent tail light on my 1997 Shorelander boat trailer. Same hole pattern, so no drilling.



by:

Perfect, light matches exactly. Very satisfied with all my purchases: Hitch, aluminum truck rack, boat trailer lights, wiring harnesses…



by:

It is what I ordered and it fits the trailer well and no problem to install. I also like the amount of light and the brightness.

James

10/7/2023

Great-The lights fit my trailer like the factory lights so I like that as every thing on my 1988 SeaRay boat, motor, and trailer is original except some motor parts replacements with manufacturers parts.

Etrailer Expert

Mike L.

10/23/2023

@James We're glad to hear that your # STL57RB trailer taillights are working well for you!


by:

Replaced the jet ski trailer light perfectly! Lighting is much brighter than the stock incandescent bulb in all modes and light disbursement is very good, even from the sides. The license plate light comes on with the parking lights and is over-kill in lighting up the area below (that is NOT a complaint)!

Toby

4/29/2015

As per my other review, love these super-bright lights!



by:

The LED lamp assembly works very well and is water proof. However I put these on my boat trailer about 4 years ago and both sides have a problem that the LED assembly fell out of the housing. There is only 1 little screw holding the LED assembly in the lens. I also lost the housing on one side of the boat trailer. I had to drill holes in the lens and back plate and add tie-wraps to hold the LED assembly in place. This needs to be improved upon.
In the pictures you will notice that I added tie-wraps to the new light.



by:

WOOOOOOOWWWWWWW!!!! These lights are BY FAR the brightest I have ever seen! Even with only the tailights on, they are STUNNINGLY INTENSE! Can't go wrong getting them, easy to install, solidly (REAL SOLID) built, look like they are very durable too. Absolutely and totally impressed and well worth the money. Put other LED and incandescent lights to shame!! JUST BUY THEM, YOU WILL BE BLOWN AWAY HAPPY!!



by:

very good lights. installed easily.



by:

Lights worked perfect for my trailer as I did a lot of research and this was the only place that had trailer lights that would work with this trailer.

Dale S.

8/11/2017

Still working great. No problems at all. Nice to back into the lake and not worry the lights are burnt out..



by:

I want to thank you for all your help with my trailer you were more helpful than you realize. So this is my trailer for a 22' Flats Cat shallow draft Catamaran. I totally dismantled my trailer and buffed by hand with a wire buffer and sand blasted in some spots and applied multiple coats of some very expensive galvanize paint (Z.R.C.). I installed all new C. E. Smith Carpet (about 80'), seven new LED waterproof lights, new springs, new equalizers, new tongue jack, new wench, new safety chain, new chain brackets, all new SS hardware and a 35' long wiring harness.
I was able to send only one review with a picture of the safety chain and brackets. I'm having a little trouble with the rest..oh some of these items were bought locally or from your competitors, until I found ETRAILER. Your prices were cheaper for the exact same things. Your helpful how to videos were helpful. And Rose, your personal helpful knowledge made my buying experience very pleasant, I actually enjoyed talking to you! Thanks to ETRAILER and specifically to Rose G.



by:

the light is a great replacement light for any trailer. typical of all trailer break lights the red clear lens is fragile and cracks easy.



by:

Just installed new lights. I think these are a nice, very bright LED light but they shipped without any mounting hardware. I would excpect that for the price it would of come with the licence plate holder and at the very least mounting screws and nuts. It added an extra hour and several more bucks to this project to hunt them down at the Home Depot. I will see in time how the lights hold up in salt water



by:

Works great and mounts perfectly in place of original incandescent light.



by:

Exactly what describe, super fast shipping. Worked well on my shorlandr boat trailer.
Only 4 stars because I haven't submerged the lights yet!



by:

I ordered this lamp because I am thinking LEDs will not be affected by the submerged in water. I had incandescent lamps that burst when submerged because the housing was not watertight



by:

Exactly what I needed



by:

just what I wanted, fits my 2007 Karavan boat trailer and I love the upgrade to LED. thanks



by:

Quality LED lights. Easy to install and one year later they are still working well.



by:

Very quick and easy Installation.
I
would recommend this product to anyone



by:

I ordered these LED Trailer tail lights (STL57RB and STL56RB) for my 1988 Shorelander trailer. I was having a hard time matching the dimensions of my worn out lights. These new lights fit perfectly. They were easy to install, but if you have questions the etrailer.com web site has resources including videos that can assist you. LED is the way to go. These lights are much brighter than the old incandescent model.

Dave D.

9/13/2018

The trailer lights are working great. Im very satisfied with the product and your company



by:

Bought these to retrofit my 2004 Shoreland'r boat trailer. etrailer's price was very competitive, they shipped exactly when they promised and the lights arrived quickly thereafter. The website description was accurate and provided exact dimensions so lights fit just as expected. Installation was fast and easy with the fasteners provided. I had heard rumors about LEDs not working properly with some 2004 GM electrical systems but there was no problem with these. Very satisfied with the product and the supplier.

Ron

2/6/2016

Theyre still functioning properly after numerous submersions and many milesof road vibration. So far, so good: Would recommend to others.



by:

After I kicked the light one day at the launch ramp, breaking the lens, I was delighted to find that i could just order the necessary lens - which came with new electronics at a decent price from etrailer. Now a year later, it is all working well - whenever we manage to get to the water - and it has maintained it's waterproof status after many dunks in the salt chuck. Good product and fine service.

Craig J.

4/17/2021

Lights continue to work well. I have adopted the policy of unplugging the light before dunking it underwater. Of course, I also had to train myself to plug it back in before getting on the road - thats what a check list is for, I imagine.



by:

This trailer tail light is a perfect fit. This is the best upgrade I have done to my boat trailer. They are very bright, both parking and brake. I am very happy with this product. Shipping was very fast and I will be back to upgrade the rest of my trailer lights. Job well done!

Tim H.

5/10/2014

Very happy after a year. Great products. Very bright and submersible, what more do you need?Highly recommended, you wont be sorry!Nice not to have a big draw from trailer lights on your electrical system.I cant say enough about them.



by:

Have used this for over a year and the lights have been great. I've pulled the boat trailer over 5000 miles and launched / retrieved the boat dozens of times in saltwater and freshwater with no signs of corrosion or any failed LEDs.

Bill

1/30/2020

Its been 2 years now, a couple dozen more launches in fresh and salt water, and 9000+ miles since I installed the lights and not so much as a failed LED. Very good product.


25
252
Show More Reviews

See what our Experts say about this Optronics Trailer Lights

  • Replacement Taillights for 1994 Shoreland'r Submersible Boat Trailer
    I recommend the LED Combination Trailer Tail Light # STL57RB and # STL56RB. The lights are 6-1/16" long x 3-5/8" tall x 2-1/4" deep and have mounting holes that are 2" on center. They are sealed lights that are submersible and feature 23 LED's that carry a Lifetime Warranty on the LED's. You will also want to get some Heat Shrink Butt Connectors # DW05744-5 to ensure a water tight seal on the wiring. These come as a set of 5 so you will have an extra.
    view full answer...
  • Replacement LED Tail Lights for a Karavan Trailer
    For your Karavan trailer I recommend LED tail lights # STL57RB and # STL56RB. They are a little shorter at 6-1/16 inches but they do mount on studs spaced 2 inches apart on center. they are 3-5/8 inches tall and 2-1/4 inches deep overall. I have linked some video reviews of these lights for you.
    view full answer...
  • Butt Connector Size to Use with Optronics LED Lights # STL57RB and # STL56RB
    The lights you mentioned of # STL57RB and # STL56RB use 16 gauge wire so for butt connectors you'd want to use the blue ones like part # DW05744-5 which are for 16-14 gauge wires.
    view full answer...
  • Upgrading Small Utility Trailer Incandescent Lights To LED Trailer Lights
    I think you will be very happy with an upgrade in your lights to the LED Trailer Tail Light - 6 Function - Submersible - 18 Diodes - Rectangle - Red Lens - Passenger, # STL56RB and the # STL57RB for the driver side. You can ground the lights independently to your trailer. Many wiring harnesses have the brown and yellow combination like you mentioned and it is most likely the case that you can connect the brown to brown and yellow to green as you mentioned, however I can't say that it...
    view full answer...
  • Replacement 6" wide x 3-1/2" Tall Tail Lights For Boat Trailer
    I'll start out by saying that you don't necessarily have to use the same sized lights, but it's occasionally helpful when it comes to mounting them. However, if you're not replacing like for like, the odds that your new lights will have the exact mounting pattern or method is unlikely. I'll also add that if your other trailer lights are incandescent, this isn't really a recommended setup. The problem is the amount of power required by each type. LEDs require much less power incandescent...
    view full answer...
    Image 1 for
  • Can Passenger Side Optronics Light Be Used on Both Sides of Trailer
    If you don't have a need for a license plate on your boat trailer then there's no reason you can't use the Optronics LED Trailer Light - Passenger Side # STL56RB (which doesn't include the license plate light) on both sides of the trailer. The license plate light is the only difference between the two assemblies. The "Over 80/Under 80" designations you see on some lights have to do with the trailer's width. A trailer that is wider than 80 inches requires additional side markers and clearance...
    view full answer...
  • Replacement Red LED Tail Lights for Trailer
    We do have very similar LED options available, however there is not a direct LED replacement available for the Wesbar Submersible Tail Light # 403075 and # 403025. I recommend looking at the Optronics LED Trailer Tail Light # STL56RB for the Passenger Side and # STL57RB for the Driver Side. These have similar dimensions to the Wesbar Tail Lights mentioned in your question at 6-1/16 inches long, 3-5/8 inches tall and 2-1/4 inches deep. They have mounting hole dimensions of 2 inches center...
    view full answer...
  • What is Needed to Switch my 1992 Trailstar Boat Trailer Over to Led's
    I checked for images of your 1992 Trailstar and all of them that I saw use a light mounted under the angle bracket on each side. To switch out the entire kit with new light wiring and plug to the vehicle use the LED Combination Tail Light Ki part # TLL56RK. This has the new submersible Led's, new wiring and the new plug for your vehicle. If you are just trying to replace the lights and your wiring and trailer connector are in good order then use the LED Combination Trailer Tail Light part...
    view full answer...
  • Recommended Replacement LED Light for a Wesbar 271585
    Scott, I took a look at your Wesbar 271585 and it looks like the LED Combination Trailer Tail Light # STL57RB would work as a replacement. This light has nearly the exact same dimensions as 271585, has 8 more diodes, and has a 3 wire design (white for ground, brown for tail lights, and yellow for stop and turn lights).
    view full answer...
  • Options to Convert Trailer to LED Lighting
    You may be able to upgrade your trailer lighting to LEDs without having to replace the entire light assemblies. In addition to complete replacement LED lights like # STL57RB we also offer LED "bulb" elements that can pop in to replace standard incandescent bulbs. You can see all such LED bulb replacements by viewing the page I linked for you. These LEDs are made in many colors and in lots of sizes as direct replacements for many of the most popular incandescent bulbs. If you scroll down...
    view full answer...
  • Are Load Resistors Always Required When Installing LED Lights As Replacements To Incandescent Bulbs
    For your LED Trailer Tail Light - 7 Function - Submersible - 23 Diodes - Rectangle - Red Lens - Driver # STL57RB there is a good chance you won't need load resistors. Not all LED trailers require load resistors like the Load-Resistor Kit # DI34ZR. It really has to do with the vehicle's wiring as much as the trailer. If you have a hyperflashing issue once you install these lights, I have a couple suggestions. If you have a 7-way trailer connection, then I recommend using the Trailer...
    view full answer...
  • LED Lighting Options for a Honda Trailer With Incandescent Surface Mount Lights
    I checked all of the lights that we have available at this time and there are two lights that may work for you. The Tall Rectangle Submersible LED Trailer Tail Light, 6-Function, 3 Wire, 18 Diode, Right Hand, item # STL56RB, or the 7 inch Round Transit LED Stop and Tail Light, 31 Diode - Red, item # STL90RB, are the only surface mount LED lights that we carry that might work for your application. They are quite a bit larger than the existing lights you have on the trailer now. If the...
    view full answer...
  • Trailer Taillight Recommendation for Replacing Light Part Number J-70
    I looked up pictures of trailer lights that are marked part number J-70 and the most similar light we carry to them is the LED part # STL57RB which measures 6-1/16" x 3-5/8". I attached a review video for this for you to check out as well.
    view full answer...
  • What is the Part Number for the Tail Light Assemblies in the Trailer Light Kit Part # TLL56RK
    If you are referring to the tail light assemblies included with the Trailer Light Kit part # TLL56RK then you can purchase them separately using part # STL56RB for the passenger's side and part # STL57RB for the driver's side. However, it will be more cost effective to just buy the kit so this is what I recommend as you would have spare parts as well.
    view full answer...
  • Driver Side Trailer Taillight to Match STL56RB
    Along with the passenger-side LED trailer light # STL56RB you can use the mating driver-side light # STL57RB. This is identical except that it also includes the license plate light function. Both of these submersible lights share the higher-efficiency and brighter output of LEDs as opposed to standard incandescent bulb lights that waste power, generate more heat and require replacement.
    view full answer...
  • Is There a Replacement Tail Light Lens For The Optronics Tail Lights STL56RB & STL57RB
    The lenses on your LED Trailer Tail Lights # STL56RB, and # STL57RB are not replaceable. Instead you will need to replace the entire tail light assembly. Another option is switching to the Optronics LED Combination Trailer Tail Lights # TLL160RK which are submersible and can use the replacement Lenses # A16RB if you should ever have one break in the future.
    view full answer...
  • Are there Replacement Lenses Available for the Optronics Waterproof Light # STL56RB
    I spoke with my contact at Optronics and they do not sell replacement lenses for these lights. These lights are submersible so they are sealed from the factory. There is no way to replace the lens and re-seal it. You will need to replace the Optronics Trailer Light # STL56RB, if you need the left hand side you will need a Optronics Trailer Light # STL57RB.
    view full answer...
  • Replacement Tail Lights For Karavan 6' x 12' Single Axle Trailer
    For trailer tail lights you need to measure the overall width of your Karavan 6'x12' single axle trailer. So you will need to measure to the widest part of the fenders which appears it will be roughly 96" wide. Based on images I could find it appears your trailer uses the LED Trailer Tail Light Driver # STL57RB and Passenger # STL56RB sides.
    view full answer...
  • How Many Lights Are Included In Rectanglular Submersible LED Trailer Tail Light # STL56RB Package
    The # STL56RB is sold individually and is designed for the right side(passenger side) of the trailer. For the left side(driver side) you would want part # STL57RB. This has the same 6 functions as the right hand but also has the license plate light included. It is also sold with one in the package.
    view full answer...
  • Replacement Stop/Turn/Tail Light Option for a Karavan Boat Trailer
    I do have a recommendation for you but at this time we don't have the exact replacement lights for your Karavan trailer. We do have the submersible driver side # STL57RB and passenger side # STL56RB lights from Optronics though that measure 6-1/16" long x 3-5/8" tall x 2-1/4" deep. These feature LED lights, a light for your license plate, and carry the stop/turn/tail light functions. I have attached some photos with dimensions as well as review videos for you to check out.
    view full answer...
    Image 1 for
  • Will Optronics Submersible LED Trailer Tail Light # STL56RB Fit a 1987 Shorelander Trailer
    Yes, the Optronics Tall Rectangle Submersible LED Trailer Tail Light, part # STL56RB, will work on your 1987 Shorelander trailer. We have gotten back many reviews of these lights working just fine on Shorelander trailers. I will give you the dimensions of the lights so you can make sure they will fit your trailer. The light is 6-1/16 inches long x 3-5/8 inches wide x 2-1/4 inches deep. They have two slots on the back of the light, 2 inches apart, for mounting on the trailer. The light...
    view full answer...
  • Driver Side Trailer Taillight to Match # STL65RB
    The matching driver side to the LED Tail Light # STL56RB is the part # STL57RB. We also have these two as a kit with wiring and a license plate bracket with part # TLL56RK.
    view full answer...
  • Recommendations for Waterproof Tail Lights for a Boat Trailer
    Optronics tail lights # ST56RS and # ST57RS are submersible assemblies. This means that water can drain out of them. What I recommend are sealed lights such as # STL57RB and # STL56RB so water cannot get in at all. Sealed lights will have far less issues than regular submersible lights.
    view full answer...
  • Replacement Trailer Lights for Shorelandr Boat Trailer
    The Optronics Tall Rectangle Submersible LED Trailer Tail Light, part # STL56RB, should work on your Shoreland'r trailer. The same light for the left side of the trailer is the Optronics Submersible LED Trailer Tail Light, part # STL57RB. We have gotten back many reviews of these lights working just fine on Shoreland'r trailers. I will give you the dimensions of the lights so you can make sure they will fit your trailer. The light is 6-1/16 inches long x 3-5/8 inches wide x 2-1/4 inches...
    view full answer...
    Image 1 for


< Previous



Do you have a question about this Trailer Light?


Info for this part was:

Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Joshua S
Video Edited:
Joshua S
Employee Adele M
Updated by:
Adele M
Employee Amy B
Updated by:
Amy B
Employee Wilson B
Updated by:
Wilson B
Employee Brian T
Updated by:
Brian T
Employee Cole B
Installed by:
Cole B
Employee Robert C
Installed by:
Robert C
Employee Jonathan Y
Video by:
Jonathan Y

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.