bing tracking image
  1. Trailer Lights
  2. Optronics
  3. Tail Lights
  4. Square
  5. Kit
  6. LED Light
LED Combination Tail Light Kit for Trailers under 80" Wide - Submersible - Driver and Passenger

LED Combination Tail Light Kit for Trailers under 80" Wide - Submersible - Driver and Passenger

Item # TLL9RK
Retail:$94.71
Our Price: $59.94
You Save: 37%
Trailer Lights
Shipping Weight: 2 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Waterproof trailer light kit includes 2 combination tail lights that serve 7 functions on trailers under 80" wide. Stud mount with stainless steel hardware and included license plate bracket. 25' wiring harness with 4-pole connector. Great Prices for the best trailer lights from Optronics. LED Combination Tail Light Kit for Trailers under 80" Wide - Submersible - Driver and Passenger part number TLL9RK can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (531)
  • Q & A (0)
  • Photos

Optronics Trailer Lights - TLL9RK

  • Tail Lights
  • Square
  • Kit
  • LED Light
  • Red
  • 5L x 5W Inch
  • Surface Mount
  • License Plate
  • Rear Reflector
  • Side Reflector
  • Stop/Turn/Tail
  • Submersible Lights
  • Optronics

Waterproof trailer light kit includes 2 combination tail lights that serve 7 functions on trailers under 80" wide. Stud mount with stainless steel hardware and included license plate bracket. 25' wiring harness with 4-pole connector.


Features:

  • Square combination tail lights serve 7 functions when properly mounted on trailers under 80" wide
    • Stop, turn, tail, side marker, side reflector, rear reflector, and license plate light
    • Built-in license plate light on driver's side light
  • Sealed, waterproof construction is submersible
  • Durable surface-mount diode (SMD) construction of LED circuit board
    • Better withstands shock and vibration
    • Allows for improved heat distribution
  • LEDs make great replacements for incandescent lights
    • No bulbs to replace
    • No brittle filaments
  • Corrosion-resistant license plate bracket
  • Durable polycarbonate housing and acrylic lens
  • Red lens over clear LEDs
  • Stud mount
    • Stainless steel mounting hardware included
  • 25' Wiring harness with 4-pole connector
  • DOT approved


Specs:

  • Application: trailers under 80" wide
    • Driver side: STL9RB
    • Passenger side: STL8RB
  • Light dimensions: 5-1/16" long x 4-9/16" tall x 2-5/8" deep
    • Light face: 4-9/16" x 4-9/16"
  • Distance between mounting studs (center on center): 2"
  • Diodes:
    • Driver's side: 14
    • Passenger's side: 11
  • Power draw at 12.8 volts:
    • Stop and turn lights: 0.259 amps
    • Side marker lights: 0.062 amps
  • Lifetime warranty on LEDs


Sealed, Waterproof Trailer Light

The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The circuit board is sealed, which means that water will not damage the diodes or circuit board.



TLL9RK Optronics LED Combination Tail Light Kit for Trailers under 80" Wide - Submersible - Driver and Passenger - 25 Ft Harness - Stud Mount

Alternate part number: TLL-9RK




California residents: click here


Customer Satisfaction Score:


Customer Reviews

LED Combination Tail Light Kit for Trailers under 80" Wide - Submersible - Driver and Passenger - TLL9RK

Average Customer Rating:  4.8 out of 5 stars   (531 Customer Reviews)

Waterproof trailer light kit includes 2 combination tail lights that serve 7 functions on trailers under 80" wide. Stud mount with stainless steel hardware and included license plate bracket. 25' wiring harness with 4-pole connector.

by:

Bought the LED light kit to replace the incandescent lights that came with the trailer. I was constantly replacing bulbs on the old units. Also the incandescent bulbs would make the tow vehicle’s flashers hyper flash at times. The LED are much brighter and solved both issues



by:

All went well except the ground wire was short on the trailer harness, had to splice a piece in.
Manufacture should consider making it another 12-18 inches longer.

Charles

11/15/2021

Working great!



by:

They work well and are a great value. LEDs are the way to go with trailer lighting.



by:

Green lights, super reliable, even dunking in saltwater on the regular. Only negative would be if you buy the set like this the configuration of lights is different than if you buy in singles for replacements the LEDs on the newer bulbs are a different shape pattern.



by:

Worked great, rewired jet ski trailer.



by:

Love the lights. I would give them five stars all day long. The wiring harness is a bit chintzy. More like 2.5 stars. It feels like if the manufacturer spent another .02 on it the quality would be better. If you paint your trailer, you need to grind away the paint beneath the ground wire, otherwise they will not work.



by:

Complete kit even comes with wire holder clips for trailer frame.



by:

My 2nd order from etrailer was as fast and easy as the first. I'm impressed and would shop here first



by:

Good option for LED lights. Easy to install and came with plenty of wire harness for an 5x8 trailer.



by:

I changed out all of my trailer lights to LED and they work great!



by:

The TLL9RK Optronics LED Combination Tail Light Kit fit my old 4 foot by seven foot utility trailer perfectly. The lights are much brighter than the OEM incandescent units. I used crimp connectors instead of those supplied in the kit. I like the plugs that came with the new wiring harness, as they appear to seal much better when the trailer is connected to the tow vehicle. I only wish the kit included a blanking seal for each plug to help keep them clean and dry when not connected, as they spend most of their time unplugged and open to the weather.

Paul

4/18/2023

A great product, the light kit is working well after a year with no problems.



by:

I believe I must have received a returned product? It was missing hardware listed in the description. Luckily, I had some lock nuts that fit the mounting bolts of the lights and was able to successfully install the kit on my small trailer without having to make a trip to the hardware store or wait for etrailer to send out some replacements. I believe this was a “fluke” and if in need, I would certainly order a similar product again.



by:

They have worked wonderful



by:

Worked great,No issues



by:

they quick the first time they got wet!

Etrailer Expert

Jenny N.

2/10/2024

I am sorry to hear that the lights are no longer working for you. They are meant to be submersible and should have been fine in water. Do you still have the lights? I can send you the warranty details for them.

John

2/15/2024

@JennyN Thank you for your response, I do not have them anymore they sat around for a bit and just through them away. My customer was upset posted photos on Facebook I did make him happy same day he called me I had a better set of lights that we installed and got him on his way. John


by:

The products are fine... the order processing and shipping were unbelievably fast... The one "downer" was that the lighting kit was put in the box without any additional packing/cushioning... the package split open and the contents of the kit were scattered among the tires... luckily, the lights/parts appear undamaged, as far as I can see... I have yet to install the kit and test it...



by:

Works great however I didn't look close enough to the connection. I was hoping for 1 with 7blade connection and brake cable



by:

Easy to install. There was plenty of length of wire to make the connections. Work great and looks great. Thank you.

Scott

11/27/2022

Everything is working with no issues. Extremely happy with the lights.



by:

When my 7 year old utility trailer lost it's lights, I looked for a solution. The package came quickly and was easy to install. It was a good idea to include the wiring kit along with the Lights because I installed the lights first and discovered that the problem wasn't solved. I then rewired the entire harness and it all works well. I would recommend one change - instead of the wire nuts, add a waterproof heat sealing connection - I soldered my wire connections using a heat shrink wrap. Also - waterproof tap in connections for the side running lights would be helpful.



by:

Always the best of quality and most complete package of trailer light replacements which is why I go to etrailer.com and am a repeat customer. These folks could write the book on how to give outstanding customer service and their people always friendly, professional and knowledgeable. This company is always a pleasure to do business with !!!!



by:

Looks great. Good buy. Would buy agai n.



by:

Arrived when scheduled. Installation was easy and they seem to be built well. Bright in sunlight. We'll see how they hold up. Could have used a few more wire clips-had to reuse some of the old ones.



by:

Rebuilt an old boat trailer. Had it powder coated and I needed a whole new light harness. This worked really well and looks good too.



by:

Adam personally looked at equipment I needed to answer my questions. I placed order on phone with him and it was packaged and processed and with shipping co. within hours. My installer said it was best choice so reaffirmed my selection. Gotta say the customer service and shipping guys were really moving and it was Memorial weekend. Can't imagine I'd use another company with such a great experience with this one. So far so good on the light kit, only submerged one day since installed but based off my installer and reviews I think I made the right choice. Will post updates if needed.



by:

No issues after a year of use. Still works great.


25
531
Show More Reviews

See what our Experts say about this Optronics Trailer Lights

  • Troubleshooting Trailer Lighting that Isn't Grounding Through Aluminum Fender
    Since the fender is aluminum and aluminum does not conduct electricity well you are going to need to run a jumper wire from the ground circuit to the main ground harness of the trailer or if the trailer frame is steel you could run it directly there.
    view full answer...
  • Recommended Aftermarket Wiring Harness for 2014 Jeep Cherokee
    For your 2014 Jeep Cherokee, to bypass the factory towing system I recommend using the T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56208 and then using either the # ETBC7 if you will be using a dash mounted electric brake controller for trailer brakes or the # ETBC7L if you will not be using a brake controller at your dash.
    view full answer...
  • Troubleshooting New LED Tail Light Not Working When Connected To Trailer
    It sounds like based on the description you provided of the issue that one white ground wire is not working on your new LED tail lights. I would first make sure that the connector on your new LED light that is having the issue does not have any debris in it causing the connection issue. Next check the ground wire going to that light and make sure it is securely connected to clean corrosion free metal. Ground wires being loose can cause all sorts of havoc. If these steps do not fix the...
    view full answer...
  • Troubleshooting No Runnings Lights After Optronics LED Combination Tail Light Kit Installation
    Thank you for purchasing the LED Combination Tail Light Kit for Trailers under 80" Wide # TLL9RK! To troubleshoot a certain light function on your trailer you definitely want to start off by checking your connections and grounds which is sounds like you've already done. After that the next step is determining which end of the wiring the issue lies on. To figure this out you can use a tester like the Brophy # F4CT on the vehicle side. For the trailer side you'll need to apply 12V power...
    view full answer...
  • How to Wire a Trailer for Tail Lights
    First, lets make sure you have all of the parts you need to wire a trailer for lights. If you have an old trailer and want to replace everything, I recommend using a kit like our Optronics Tail Light Kit, # TL29BK and our trailer wiring installation kit # HM51020. We also have an LED kit, # TLL9RK. Step 1 - The trailer connector should extend 2 - 3 feet past the tongue. Attach the ground wire directly to the tongue of the trailer using a self tapping screw # 101131802 and a ring terminal...
    view full answer...
    Image 1 for Image 2 for
  • Wiring Parts for 16-Foot Deck Trailer with Brakes
    We can help you with new wiring for your 16-foot trailer with brakes. We do not have a wiring-only type kit but we do have complete kits with both lights and wiring, such as # TLL9RK and the other similar kits shown on the linked page. If you just need specific wiring components we can help you with those too. A good way to go is the 7-way junction box #HS381-9000, which mounts to the trailer tongue. Your existing wiring (or new wiring) can then connect inside this junction box, including...
    view full answer...
  • How to Pick Out Hub and Lighting for Harbor Freight Trailer
    You are going to have to pull a hub off your trailer to determine if the hub you referenced would fit it. We have to match either spindle dimensions or bearing numbers to know if the part # AKIHUB-440-2-1K is a correct replacement. The bearings of this hub are: Inner bearing: L44643 (1" inner diameter) Outer bearing: L44643 (1" inner diameter) For a submersible LED trailer light kit the part # TLL9RK is our most popular submersible option and would work well. I attached an install video...
    view full answer...
    Image 1 for
  • What is the Difference Between Trailer Lights # STL9RB and # TLL9RK
    The difference between the LED Left Hand Trailer Light, # STL9RB, and the Trailer Light Kit, # TLL9RK, is the fact that one is an individual light and the other is the light set with license plate bracket. Part # STL9RB is the left hand stud mounted LED tail light. Part # TLL9RK is a packaged kit which includes 2 LED stud-mount tail lights, # STL8RB and # STL9RB, and a corrosion proof license plate bracket.
    view full answer...
  • Are All LED Lights Submersible For Use On Boat Trailer
    When selecting an LED light, if the description states it is waterproof or submersible then the light can be submersed in water. The item you selected, Waterproof, Under 80 Inch LED Trailer Light Kit with 25 Foot Wiring Harness, part # TLL9RK, has encased LED diodes. Water can enter the light lens but not the LED casing. There are also 2 holes that allow water to drain out of the lens. Part # TLL9RK are used for the rear trailer lights for running, turn, and brake lights. For sealed...
    view full answer...
    Image 1 for
  • Lens Replacement Recommendation for STL8RB and STL9RB
    Yes we carry replacement side lenses for the part # STL8RB and # STL9RB. For that you would want the part # AL9RB. For a replacement front lens you would want the part # A8RB.
    view full answer...
  • Recommended Trailer Tail Light Kit with LEDs for Trailers Over 80" Wide
    It sounds like you are looking for a trailer light kit for a trailer over 80" wide with LEDs. If that is the case then you can use the LED Combination Tail Light Kit for Trailers part # TLL9RK and just add the marker lights separately which is what makes the kit compatible with trailers over 80" wide, the LED Trailer Clearance or Side Marker Light part # MCL32ABB.
    view full answer...
  • Recommended Trailer Wiring and Bracket for Double Trailer Towing
    It sounds like you are wanting to have two trailers in line. If this is the case and you are towing double, I recommend the Submersible, Under 80" LED Trailer Light Kit with 25' Wiring Harness # TLL9RK you mentioned and suggest using a junction box like # 38656 along with the mounting bracket # 18144 you mentioned. Then you would just need a second light kit for the rear trailer. I'd run the wiring on the first trailer from the tongue to the junction box at the rear and then run the...
    view full answer...
  • Replacement Right Hand Side Taillight For Optronics Trailer Lights Part TLL9RK
    The Optronics Trailer Light, # STL8RB, is a universal right side light for the # TLL-9RK set. They have the same dimensions, functions, amperage draw, and diodes. So this light will work.
    view full answer...
  • What is the Spacing of the Mounting Studs on Optronics Trailer Light Kit, # TLL-9RK
    The spacing on the mounting studs on the lights in the Waterproof, Under 80 inch LED Trailer Light Kit with 25 foot Wiring Harness, # TLL9RK, are 2 inches, center to center.
    view full answer...
  • Newly Installed Trailer Light Kit Not Working Behind a 1998 Ford F-150
    Which grounds did you check? There are at least 4 ground connections that you need to make sure are working. One at each of the lights, the ground wire that goes from the trailer frame to the trailer connector, and the ground that goes from the vehicle frame or body to the vehicle connector. Any of these grounds could be the culprit. Remember, paint and rust can insulate these ground connections so make sure the eye terminals have direct metal contact. If everything else is wired properly...
    view full answer...
  • Will a Trailer LED Light Kit Work with Curt Trailer Wiring Harness 56011 on a 2014 Mazda CX-5
    Curt trailer wiring harness # C56011 will work great with the LED tail lights in trailer light kit # TLL9RK. The Curt trailer wiring harnesses that require power from the vehicle battery to power the trailer lights tend to dimly light LED trailer tail lights even with the vehicle turned off. However, harness # C56011, is not a powered converter so that problem should not happen at all. I have linked some videos on both the light kit and the trailer wiring harness for your reference.
    view full answer...
  • What is the Difference Between Submersible and Waterproof Trailer Tail Lights
    A submersible tail light can let water in, there is usually a hole at a low point so the water can drain out. A waterproof light should be sealed to keep out water. For either type, you would also want to seal out water where the tail light wiring splices into the trailer wiring. Shrink tubing works well for this. You can also wrap up connections with electrical tape. Or you could use a combination of liquid electrical tape, # SWC50122, and regular electrical tape. Ideally, if you have...
    view full answer...
  • Sealed LED Tail Lights on Trailer Do Not Illuminate But Incandescent Type Will Work
    The Optronics Submersible LED Trailer Light Kit, part # TLL9RK, provides a lifetime warranty on the the LEDs and features water-proof housings. This particular product uses two threaded stainless steel studs for mounting to your trailer and a 3-wire configuration for electrical connection to your trailer wiring. The light includes separate wires for ground (white wire), stop/turn signals (green and yellow wires) and running lights (carried on the brown wire). There are similar products...
    view full answer...
  • Brakes Lights on Trailer Don't Work But All Other Light Functions Work
    The issue you are seeing with the lights on your trailer can be traced back to 2 different things; you have a weak or poor ground connection for your brake lights, or they are drawing too much power on that circuit. Check the grounds on your brake light circuit (including on your vehicle side) and make sure they are solid and connected to a clean, bare-metal surface. Even some paint can cause some issues. If that all looks good then try disconnecting the lights one by one and testing...
    view full answer...
  • Converting Trailer Lights to LED Operation
    You have a couple of options for converting your Pace Arrow trailer lighting from incandescent to brighter high-efficiency LED operation. One is to replace the entire set of lights with new LED-type fixtures, but another is simply to install replacement LED "bulbs" in place of the standard incandescent ones that are now in your Bargman lights. This option can be substantially less costly and also far easier since there is no wiring or other modifications needed; you'll simply pull out...
    view full answer...
  • Wire Gauge Used in Optronics Standard Trailer Light Kit # TLL9RK
    I checked with my Optronics representative, who tells me that the 25 foot long wiring harness included with the # TLL9RK Standard Trailer Light Kit is constructed of 20 gauge wire.
    view full answer...
  • Can LED and Incandescent Trailer Lights both Be Used at Same Time
    A trailer can very easily have incandescent and LED lights at the same time. There is no issue mixing the two styles of lights. If you added the trailer lighting kit part # TLL9RK that you referenced to your trailer you'd have no problems at all. I attached an install video for this kit for you to check out as well.
    view full answer...
  • Trailer Light Recommendation for a 1984 Skeeter Wrangler Bass Boat
    Since you have a boat trailer you are going to need trailer lights that are submersible. For a light kit that would work well on your trailer that has LED lights I would recommend the part # TLL9RK. I attached an install video for you to check out as well. If you are looking for any other specific accessories for you trailer e-mail me back and I will help you pick them out.
    view full answer...
  • Are the mounting screws stainless steel on the LED Trailer Light Kit, part # TLL9RK?
    Yes, the mounting hardware included with the Waterproof, Under 80 inch LED Trailer Light Kit with 25 foot Wiring Harness, part # TLL9RK, is stainless steel and corrosion-resistant.
    view full answer...


< Previous
123. . .7



Do you have a question about this Trailer Light?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee DeAnne T
Expert Research:
DeAnne T
Employee Robert G
Expert Research:
Robert G
Employee Patrick B
Expert Research:
Patrick B
Employee Michael H
Expert Research:
Michael H
Employee Reno H
Expert Research:
Reno H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Tyler C
Written by:
Tyler C
Employee Joshua S
Video by:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Cole B
Installed by:
Cole B
Employee Ryan G
Installed by:
Ryan G
Employee Wilson B
Updated by:
Wilson B
Employee Brian T
Updated by:
Brian T

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.