Easy Grease Trailer Idler Hub Assembly for 6K Axles - 6 on 5-1/2 - Pre-Greased
(44 reviews)
Price: $74.34
In Stock
Easy Grease Trailer Idler Hub Assembly for 6K Axles - 6 on 5-1/2 - Pre-Greased
Item # AKIHUB-655-6-EZ-K
Our Price: $74.34
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (44)
- Q & A (0)
- Photos
etrailer by AxleTek Trailer Hubs and Drums - AKIHUB-655-6-EZ-K
- 6 on 5-1/2 Inch
- For 6000 lbs Axles
- Hub
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Easy Grease
- EZ Lube
- Pre-Greased
- 1/2 Inch Stud
- 15123
- 25580
- etrailer
Hub is designed for use on trailer idler axles. Fits 6,000-lb Dexter E-Z Lube and etrailer Easy Grease axles with #42 spindles. Inner bearing (25580) and race, outer bearing (15123) and race, grease seal, grease cap, and lug nuts included.
Features:
- Trailer hub assembly fits idler axles
- Bearings, races, seal, grease cap, and lug nuts are included
- Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy
- Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub
- Sturdy iron construction
- Zinc-enriched paint finish
- Pre-greased idler hub is easy to install - no need to pack bearings
- Lithium complex, multipurpose grease keeps bearings lubricated
- QAI and CSA certified
Specs:
- Application: 6,000-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #42 spindles
- Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO
- Wheel size: 14-1/2" to 16-1/2"
- Bolt pattern: 6 on 5-1/2"
- Wheel stud dimensions: 1/2" diameter x 1-1/4" long
- Grease cap flange diameter: 2.45"
- Weight capacity: 3,000 lbs
- Limited 1-year warranty
Bearing, Race, and Seal Information
- Bearings (included)
- Inner bearing: 25580 (1.75" inner diameter)
- Outer bearing: 15123 (1.25" inner diameter)
- Races (included)
- Inner race: 25520
- Outer race: 15245
- Grease seal (included): GS2250DL
- Inner diameter: 2.25"
- Outer diameter: 3.376"
E-Z Lube and Easy Grease-Compatible Hub for Simple Lubrication
The grease cap on this hub is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
- If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
- If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
- If D = 3", then the bolt pattern is 5 on 5"
- If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
KH-655-07-19 AxleTek Trailer Idler Hub Assembly for 6K Axle with Hardware - 6 on 5-1/2 - EZ Lube - Pre Greased
Customer Satisfaction Score:
100% were satisfied with this product
0% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Easy Grease Trailer Idler Hub Assembly for 6K Axles - 6 on 5-1/2 - Pre-Greased - AKIHUB-655-6-EZ-K
Average Customer Rating: 4.9 out of 5 stars (44 Customer Reviews)
Hub is designed for use on trailer idler axles. Fits 6,000-lb Dexter E-Z Lube and etrailer Easy Grease axles with #42 spindles. Inner bearing (25580) and race, outer bearing (15123) and race, grease seal, grease cap, and lug nuts included.by: Brent01/12/2024
I have been very happy of the prompt service and dedication etrailer has given me. I have bought several things from them over the years and will continue.
Thanks Again etrailer,
by: Dennis 12/12/2022
Very professional from beginning and hanging phone.up.
Definitely I will do business again. Have a Nice day and Merry Christmas!!!
by: James 02/22/2024
Good pricing and fast shipping. Great p roducts.
by: Kevin 08/03/2023
Easy ordering and received quick. Already put on trailer and works great. Exact duplicate to what I had
by: Chris08/17/2022
Doesn’t fit inside the brake rotor on my dexter 6k hubs.
Heather A.
9/2/2022
Hey Chris, it sounds like you have slip on disc brakes. Can you be more specific about why the idler hub does not fit inside? Is the bolt pattern different? This particular idler hub has a 6 on 5 and a half bolt pattern. If you let me know what you have on your trailer I can assist you further. A photo will help as well.
by: Thomas08/26/2022
I have an old homemade trailer I use for hauling my tractor. The seals and bearings seemed to be failing on the front axle so after watching your video I decided to replace the hubs. I did order the wrong hub,the bearings were slightly larger than the ones on the old hub but after trying it anyway it looks like they are going to work just fine! Fast delivery. Pre-Greased hubs work great!
by: Tim10/18/2022
These hubs arrived greased, assembled and ready for installation. Can't ask for more than that!
by: Ray O.06/16/2016
I ordered hub kit to replace the house trailer hubs on my trailer. This was the right fit and a great price.. The kit came with all the bearings, seals, dust caps, lug studs, and lug nuts.. Great place to pick up all your trailer needs!
by: James 10/08/2022
got them a head of time. shipping was fast. didn't have any problem installing them.
by: Thomas 12/16/2022
Fit right and the hud doesn't brake like other hubs .we used on are equipment.
by: Joe R.02/09/2017
Greetings Nickey;
I received the 4 hubs Yesterday and am glad to say, they are very Heavy Duty. My plans are to replace the Mobile Home hubs on my 18' trailer to have a modern trailer with heavy Duty hubs that use the more easily available 6 bolt wheels. The old style Mobile Home wheels W/ tires are no longer available in this area, and very expensive when you do locate any.
Many thanks for your follow-up, as this shows your concern for your products and most importantly,,,your customers.
by: Jonathan 03/21/2021
Worked well for the many miles we’ve put on them! Etrailer also has the best customer service! I had to call and ask a few questions before placing an order and they answered everything without hesitation.
by: Ross 12/29/2020
Excellent customer service which I find to be a dieing art, quick turnaround and I received exactly what they advertised. Quality parts and attention to detail. I’ll be ordering again and again.
by: Garrett 01/24/2020
Shipping was extremely fast and great prices. The hubs arrived and were a perfect fit. Will definitely shop here again for any trailer needs! The wife's reaction when she grabbed the box from the UPS driver was priceless, she had no idea that 4 hubs would way so much lol.
by: James 06/28/2022
"I will give your company the highest rating I can. Service was good ,no problems. Parts came in quick. I had no trouble installing them."
by: Randy09/12/2018
The only place for all your trailer needs, they have it all! Fast shipping too.
by: Bruce Hart06/12/2017
Great product and price.
Bruce H.
6/12/2018
The parts worked out great. You are a great source for trailer parts and you are well regarded.
by: Jeff02/07/2022
Lightning fast shipping, great product!
by: Rod W08/17/2020
Fits the axle it said it would... working great one year later.
by: LRK07/01/2022
Hubs worked great on my old axle. Went right on and axle appears and works like new. Cost effective fix.
by: Marty02/14/2017
Everything I have purchased from you has been good quality and shipping is fast !! I would definitely recommend you to anyone. Thanks
by: Mike07/30/2019
service could not have been any better product was received quicker than expected Thank you very much .
by: Grant 12/17/2020
Perfect fit ! Great service from Odelia! Package arrived 2 days early. Put the hubs on today, no problems! Will come back again as needed. Thanks
by: Tony 01/08/2024
by: Jamison12/23/2023
25
44
Show More Reviews
See what our Experts say about this etrailer Trailer Hubs and Drums
- Solution for 5,200 Lb Replacement Axle With 73" Hub Face MeasurementI do have a solution, but we do not have a replacement axle that matches that capacity and hub face measurement. What I can offer instead is the universal Timbren Axle-Less Trailer Suspension # ASR5200S01. This system fits any trailer width so you don't have to worry about matching the length. It will also replace/upgrade your suspension using AEON rubber springs that work independently. Removing the axle beam will give you additional clearance as well. If you also need hubs you can...
view full answer... - Which Bearings and Hubs Fit Heavy Duty 3,500 Lb Timbren Axle-Less Trailer Suspension The Timbren Axle-Less Trailer Suspension # ASR35HDS05 is the heavy duty model. The heavy duty Timbren uses a spindle that is a size up from the axle capacity, so the inner bearing is the # 25580 and the outer bearing can be the # 14125A or # 15123 which is standard for 5,200-7,000 lb axles. Unfortunately, that means that a 5 on 4-1/2 pattern won't be an option. A hub that fits will either have a 6 on 5-1/2 or 8 on 6-1/2 bolt pattern. You will either need new wheels to match the bolt pattern...
view full answer... - Do We Have Grease Used With Easy Grease Trailer Idler Hub AKIHUB-655-6-EZ-KWe have the same grease used in the Easy Grease Trailer Idler Hub Assembly for 6K Axles # AKIHUB-655-6-EZ-K, just with a different color. The hub comes pre-greased with a lithium complex grease, and you can get exactly that - as well as the needed grease gun - with the following: - LubriMatic LMX Industrial Strength Grease # L11390 - LubriMatic Standard-Duty, Lever Action Grease Gun # L30200 The # L11390 is a red grease but is otherwise the same and will be exactly what is needed for...
view full answer... - Which Hubs Fit the Timbren Heavy-Duty Axle-Less Trailer Suspension # TASR35HDS06 with 2" LiftThe hubs that fit the Timbren Heavy-Duty Axle-Less Trailer Suspension # TASR35HDS06 use inner bearing # 25580, outer bearing # 15123, and a grease seal with a 2-1/4" inner diameter. For regular hub use part # AKIHUB-655-6-EZ-K but if you are wanting to incorporate brakes then you want hub and drum part # AKHD-655-6-EZ-K with the brakes # AKEBRK-7-SA for electric or # AKFBBRK-7 for hydraulic. I have attached some installation videos that you can reference as well.
view full answer... - Timbren Axle-Less Trailer Suspension Compatibility with Jeep 5 on 5 Bolt PatternFor your Timbren Heavy-Duty Axle-Less Trailer Suspension - 4" Lift Spindle - Off-Road Tires - 3,500 lbs # ASR35HDS02, we do not have anything that will work in a 5 on 5 inch hub. Those spindles on the Timbren use a larger than normal hub for the capacity. You would need to use the Dexter Trailer Hub and Drum Assembly - 12" - 6 on 5-1/2 bolt pattern # 8-201-9UC3-EZ for that axle using brakes or # AKIHUB-655-6-EZ-K for an idler hub. For the Timbren Axle-Less kit compatible with the...
view full answer... - Replacement Trailer Hub for a 2004 Four Winns Boat Trailer with 6 on 5-1/2 Wheel Bolt PatternThe replacement hub that you will want for your 2004 Four Winns boat trailer is part # AKIHUB-655-6-EZ-K. This is a 6,000-lb hub with the same bearings, grease seal and 6 on 5-1/2 inch bolt pattern as your current hubs. This hub comes with everything you need to install the hub except the bearing grease. If you would like to pick up extra bearing grease, I recommend our marine grease, # L54FR. These are 3 cartridges 3 ounces each, which you can use with or without a mini grease gun....
view full answer...
- Availability of 5,200 lb Axle With Idler HubsAlthough we do not have a version of the # e75SR that comes with idler hubs, we do have the parts needed to put this together. All you need is the # e55GR along with the Easy Grease Trailer Idler Hub # AKIHUB-655-6-EZ-K. This is pre-greased so it is ready to go. The hubs have a slightly higher capacity at 6k but they use the same bearings and grease seal so it won't hurt anything. You will still be limited by the 5,200 lb capacity of the axle.
view full answer... - Replacement 6-on-5-1/2 Idler Hub Kit to Replace Hub 82655You can use 6-on-5-1/2 idler hub assembly # AKIHUB-655-6-EZ-K for your application. This hub kit includes bearings 25580 and 15123 along with races and a grease seal.
view full answer... - How to Find Bearing Numbers to Allow Selecting Replacement Hub for 1996 Four Winns TrailerWe can help you with a spare trailer hub-and-drum assembly and/or spare bearings for your trailer. Thank you for your photo. Either way you will need to pull one of the hubs to get the part numbers from the inner and outer bearings. These part numbers will of course allow you to select the correct spare bearings but they will also help us find the correct spare hub/drum. A new hub/drum must use the same set of bearings as the one it replaces; this is how we can ensure the hub will fit...
view full answer...
- Will 16 Inch Tires Fit Timbren Axle-Less Suspension System # ASR35HDS05As long as there is a hub that fits the spindle and has the bolt pattern needed for the wheels then yes the Timbren Axle-less system # ASR35HDS05 will work with 7.50-16 tires. For example hub # AKIHUB-655-6-EZ-K will accept 16 inch tires as long as the wheel has a 6 on 5-1/2 bolt pattern. I have linked a help article on determining wheel bolt patterns for you.
view full answer... - Replacement Hub for #42 Spindle on Homemade TrailerAlthough we do have hubs that will fit your #42 spindle, nobody makes one with a 5 on 4-1/2 or 4 on 4 bolt pattern. The only option would be to use something like the Easy Grease Trailer Hub and Drum Assembly # AKHD-655-6-EZ-K. This hub and drum assembly has a 6 on 5-1/2 bolt pattern and is designed for 5,200 lb and 6,000 lb axles. If you need brakes as well then you could use the # AKEBRK-6 along with the # BRKH12 mounting hardware. If you only need an idler hub the # AKIHUB-655-6-EZ-K...
view full answer... - Do Different Timbren Axle-Less Suspension Systems Have the Same Camber and Ride HeightThe caster and camber could be the same on the # TASR35HDS03 and # ASR2KHDS05. The system has a slight manufacture camber. However, it is up to you on how much camber you have based on the installation. This can be changed using the included shims. As far as the ride height is concerned, these do not have the same dimensions. This will result in a different height between the systems when installed. The # TASR35HDS03 will also stick out farther. Since there is no real advantage to using...
view full answer... - Hubs and Wheels to Fit 3,500 Pound Heavy Duty Timbren Axle-less SystemThe # TASR35HDS07 Timbren system is a heavy-duty system so it actually fits higher rated hubs than its 3,500 pound capacity. I recommend going with # AKIHUB-655-6-EZ-K which fit the Timbrens and are for the EZ Lube spindles.ve The hubs have a 6 on 5-1/2 bolt pattern so the tire and wheel combo I recommend is part # AM32575. These are 225/75-15 radials on black steel wheels. If you prefer a different style I've linked our entire selection of of combos on 15 inch wheels for you.
view full answer... - Solution for Trailer Hub Replacement for Dexter 8-233aI have an alternative solution for you to consider but based on the info you listed we don't have a standard trailer hub that will fit in place of what you have now. This is not uncommon as mobile home axles are generally considered to be one-time-use. Most likely you'll need new axles. We do have axles available if you need a replacement. Using the capacity, overall length, and spring center length you can find the right axle for your needs. I attached a page that has all of the trailer...
view full answer... - Replacement Trailer Hub Assembly That Uses Bearing Sizes 15123, and 25580The CE Smith Trailer Idler Hub Assembly # CE13611 will not fit your trailer with the hub bearings 15123 and 25580. Your hub bearings are most commonly found in 6,000lb axles and will require one of the following hubs. etrailer Trailer Idler Hub Assembly # AKIHUB-655-6-EZ-K for an EZ Lube axle etrailer Trailer Idler Hub Assembly # AKIHUB-655-6-K for a standard spindle Both of these hub assembly's will include new inner and outer bearings and races, lug nuts, grease caps, and a 2.25"...
view full answer... - Will 225/65R17 Tires Work on the Timbren Axle-Less Trailer Suspension - Heavy Duty - 2" Lift 3.5KThe tire size you mentioned, 225/65R17, is not a size used on trailers. I can't recommend using a tire on a trailer not designed for trailers but, you can physically use this size on the Timbren Axle-Less Trailer Suspension part # TASR35HDS07 with an appropriate hub. The hubs we offer for this are the Easy Grease Trailer Idler Hub Assembly part # AKIHUB-655-6-EZ-K which has a 6 on 5-1/2" bolt pattern and the Dexter Trailer Idler Hub Assembly part # 8-231-9UC1-EZ which has a 8 on 6-1/2"...
view full answer... - Recommended Axle and Suspension Upgrade for Converting Pop-Up Camper to Stand-Up Tear CamperIn order to put a heavier suspension on your trailer you will need an axle, leaf springs, hangers, spring seats (if you need to move them), suspension bolts, U-bolts/U-bolt plates, and shackle straps (if you want a double-eye leaf spring). You will need to start with the axle, which will require the hub face to hub face dimensions of your current axle. While the spring seat to spring seat measurement can be helpful, it is possible to remove the spring seats and weld on new ones if necessary....
view full answer...
- Replacement for 826555 Idler Hub on Boat TrailerIt sounds like you have 6K axle, if that's the case we do offer a hub that should work for you. Part # AKIHUB-655-6-EZ-K is an idler hub assembly for a 6K axle with a 6 on 5-1/2 inch bolt pattern. The hub uses a 25580 inner and 15123 outer bearing along with a GS2250DL grease seal. To confirm that this is correct, please check the reference numbers on your inner and outer wheel bearings, or you can use a digital caliper like # PTW80157 to measure the surface of the spindle where the inner...
view full answer... - Recommended Tire Size Compatible with Timbren HD 3500-lbs Axle-less Suspension SystemI'll start off by saying that wheels and tires do not come with hubs, and what hubs you'll be able to use depend on the spindles on the axles, and whether or not you'll want brakes on the trailer or not. If you're going to be using the Timbren # TASR35HDS07, you'll need hubs that have # 25580 inner bearing and # 15123 outer bearings, like the # AKHD-655-6-EZ-K for a hub and drum assembly or # AKIHUB-655-6-EZ-K for idler hubs. If you're going with the hub and drum so you can add brakes,...
view full answer... - Replacement Boat Trailer Hubs for #82655If you are looking for replacement hubs for your boat trailer, we offer lots of great solutions. The Trailer Idler Hub Assembly # AKIHUB-655-6-EZ-K is a great kit that includes everything you need to replace your 82655 hub. The bearings ( # 25580 for the inner bearing, # 15123 for the outer bearing), races, and grease seal included in this kit can also be purchased separately if needed. Check out the video linked below for details on assembly and installation.
view full answer... - Will Timbren Axle-Less Trailer Suspension System HD 3,500 Lbs Work without BrakesYes, you can still use the Timbren Axle-Less Trailer Suspension System like part # ASR35HDS01 without brakes and just hubs. The Dexter Trailer Idler Hub Assembly part # 8-231-9UC1-EZ for 8 lug or the Easy Grease Trailer Idler Hub Assembly part # AKIHUB-655-6-EZ-K for 6 lug will both work great.
view full answer... - Recommended Hub/Drum and Idler Hub for Timbren Axle-Less Suspension # ASR35HDS02For a brake drum hub, Timbren recommends the # 8-201-9UC3-EZ from Dexter Axle, which features a 6 on 5-1/2 bolt circle. For an idler hub, go with the # AKIHUB-655-6-EZ-K. Both hubs use the # 25580 inner and # 15123 outer bearing, which is compatible with the spindle used by the Timbren # ASR35HDS02 axle-less suspension you referred to. If you go with the hub/drum, you'll also need a brake assembly. I recommend going with a Nev-R-Adjust assembly, like # 23-459 for the right side and #...
view full answer... - Can Dexter 6 Lug Hub/Drum be Replaced with Standard HubYes, there are hubs that can replace your Dexter hub/drums that you have currently. If the axle is rated for 6,000 or 5,200 lb you would want the hub part # AKIHUB-655-6-EZ-K or if it's rated for 3,500 lb you'd want the # AKIHUB-655-35-EZ-K.
view full answer... - Looking For Replacement Trailer Axles With 70 Inch Spring Center and 85 Inch Hub Face SpacingWe carry a Dexter 6K axle that comes very close to the measurements you specified. The # 8327826-EB has an 86-1/2 inch hub face to hub face dimension, which means it would only be 3/4 of an inch longer on each side which should still work well for you. The spring seats are 71-1/2 inches apart, but they could easily be removed and new ones could be tacked in place using part # TRSS300 which are sold individually. The # 8327826-EB comes complete with electric brake assemblies and a hub/drum...
view full answer...
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Installed by:
Jeff D
Installed by:
David F
Video Edited:
Jacob T
Video by:
Dustin K
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Mike S
Written by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Dennis
12/13/2023
Great no problems.