Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 6 on 5-1/2 - Pre-Greased
(45 reviews)
Price: $57.04
In Stock
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 6 on 5-1/2 - Pre-Greased
Item # AKIHUB-655-35-EZ-K
Our Price: $57.04
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (45)
- Q & A (0)
- Photos
etrailer by AxleTek Trailer Hubs and Drums - AKIHUB-655-35-EZ-K
- 6 on 5-1/2 Inch
- For 3500 lbs Axles
- Hub
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Easy Grease
- EZ Lube
- Pre-Greased
- 1/2 Inch Stud
- L44649
- L68149
- etrailer
Hub is designed for use on trailer idler axles. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.
Features:
- Trailer hub assembly fits idler axles
- Bearings, races, seal, grease cap, and lug nuts are included
- Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy
- Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub
- Sturdy iron construction
- Zinc-enriched paint finish
- Pre-greased idler hub is easy to install - no need to pack bearings
- Lithium complex, multipurpose grease keeps bearings lubricated
- QAI and CSA certified
Specs:
- Application: 3,500-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #84 spindles
- Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO
- Wheel size: 14-1/2" to 16-1/2"
- Bolt pattern: 6 on 5-1/2"
- Wheel stud dimensions: 1/2" diameter x 1-5/16" long
- Grease cap flange diameter: 1.99"
- Weight capacity: 1,750 lbs
- Limited 1-year warranty
Bearing, Race, and Seal Information
- Bearings (included)
- Inner bearing: L68149 (1.378" inner diameter)
- Outer bearing: L44649 (1.063" inner diameter)
- Races (included)
- Inner race: L68111
- Outer race: L44610
- Grease seal (included): 58846
- Inner diameter: 1.719"
- Outer diameter: 2.565"
E-Z Lube and Easy Grease-Compatible Hub for Simple Lubrication
The grease cap on this hub is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
- If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
- If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
- If D = 3", then the bolt pattern is 5 on 5"
- If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
KH-749-07-19 AxleTek Trailer Idler Hub Assembly for 3.5K Axle with Hardware - 6 on 5-1/2 - EZ Lube - Pre Greased
Compare to Dexter 84655UC1-EZ
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
Customer Reviews
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 6 on 5-1/2 - Pre-Greased - AKIHUB-655-35-EZ-K
Average Customer Rating: 4.9 out of 5 stars (45 Customer Reviews)
Hub is designed for use on trailer idler axles. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.by: Soler07/15/2020
I used these to replace odd-ball 5 on 5.5 hubs. I hate that bolt pattern. So hard to find good rims because hardly anyone uses them. In fact, I did this swap shortly after buying the trailer (read, tires and wheels were still in new condition). The dealer I bought them from was reluctant to give me much money for them. He told me that even he would have a hard time selling them because they were such an odd-ball bolt pattern. As he said this, I'm looking around at his lot of trailers, ALL with hubs with this same bolt patter. Ugh!
I wanted to upgrade the rims on my trailer, and upgrade the tires. So, went with this pattern (on two trailers). Quality product. Would def. buy again.
by: Robert 03/06/2024
Excellent idler hub assembly for an attractive price.
eTrailer support is amazing!
by: Kevan03/03/2024
Tiffany determined which hub that I needed with minimal information from me and she was right on the money. I’m very grateful.
by: Henry07/07/2018
Could not have asked for anything better bearing being pressed in just a simple of installation as you could ask for I will always go back to etrailer.com for all my trailer needs
by: Gordon 05/06/2023
Everything I ordered was correct. They kept me updated on the back order items suggested an alternative when the hubs gots delayed a second time. Went together great. Hoping this is the last axle and hubs I put on the trailer.
by: Jason 03/12/2023
I was needing bearing, but wanted to change hubs to better style (from Mercedes style to regular stud style). It was only a little extra to do the whole hub. The pre-greased already put together hubs took about 10 mins per hub to change. Most of that was cleaning spindles for install. I really like this option. Super easy, quick fix.
by: David09/17/2021
Perfect replacement for the 16 yr old original hubs. Had both replaced in 15 minutes.
by: David C02/25/2017
There's not much to say. It's a trailer hub. There are plenty of things to say about the customer service, which was great when I called in to make my order and make sure I was ordering to right part. The time of arrival at my doorstep was very quick. I thought I was going to have to order and forget about it until it arrived but not with e trailer; the order arrived within a few days. It was well packaged too.
by: Michel 07/21/2023
Great product and qualified service customers and delivery. Thank you
by: Duke10/20/2022
It was the wrong ones. Other than having to buy spindles to fit and waiting STILL for machine shop to weld it, perfect, just perfect. Over a year and still can't use it.
by: Scott06/11/2018
Purchased several items from you, very happy with service and pricing! Wouldn’t have been able to build our off road camper with your help!
by: Rich F.07/16/2020
So on the last trailer I converted to hydraulic disc, I used the Titan kit with actuator. This trailer is a cargo trailer for work 14'X8' and not that heavy. I went with Kodiak discs and the Hydrastar actuator. I mounted it inside the trailer to protect it and keep it out of sight. It's so quiet but works flawlessly! Even with the door open, it's tough to hear, so for bleeding, I set up a remote switch to activate the system. It doesn't leak, has plenty of power, and is very smooth coupled with my factory Ford brake controller.. It's been a year, so long time reliability is a wait and see, but so far, I'm very happy.
by: Preston 08/12/2023
Excellent timing and customer service
by: Victor06/03/2022
Excellent! Used these to convert from worn 4 bolt hubs with 15 inch tires to larger, higher weight capcity 16 inch commercial Transit van tires. Just towed a scrap auto to the recycler. Its like having a new trailer. Highly reccomended!+++
by: James01/10/2018
Loved the personal service and the help. I tried a few other sources before going online to order from etrailer. One place I tried was an online tool dealer, and their online site was a mess without help and so was a retail location. etrailer, was quick to find me exactly what I needed and got me fixed up in just a few minutes. From now on all my trailer needs will be fulfilled from etrailer!!!
by: John 12/06/2021
They were a perfect fit to my timberland Axle-less system. A simple stud change and I was able to bolt up stock Toyota wheels to my new trailer.
by: George01/11/2018
PRODUCT IS EXCELLENT QUALITY, EXACTLY WHAT I ORDERED AND NEEDED. SERVICE WAS FAST AND ALLOWED ME TO GET MY TRAILER BACK ON THE ROAD.
I WILL HIGHLY RECOMMEND ETRAILER.COM
by: Darrell C.05/23/2017
Items were shipped promptly and arrived on time in good condition. Well packaged. Good quality products that will be a new utility trailer axle for me within the next week.
by: Martin 07/26/2022
They came pre packed with grease and fit perfectly! Wow one of the easiest replacements I've used
by: Charles05/20/2021
Look good so far haven't installed them yet but will update when they are done. Shipping has always been great, normally delivered this and my previous orders on time. Will be purchasing my future trailer needs again from your company.
by: Robert 06/07/2021
As always, etrailer had the parts I needed, got them to me ahead of time expected, and the order was correct. Great job!
by: Chris 11/04/2021
Great customer service. Fast shipping, detailed tracking, and the product was exactly as described.
by: Gabriel10/22/2020
Very happy with the product! Fast shipping and worked perfect. What impressed me the most though, was that they emailed me a year later
To make sure I was happy with the product. Absolutely will use them again. It’s hard to find good service like this anymore these days. Very impressed.
by: Timothy02/12/2018
Thanks everything worked Great and still is!!!!
by: TBHouston06/07/2022
Appears to be a good items, installed e asily
25
45
Show More Reviews
See what our Experts say about this etrailer Trailer Hubs and Drums
- Which Hub to Use With Dexter Trailer Axle with Spindle for L68149 Inner and L44649 Outer BearingYes. The Trailer Idler Hub Assembly # AKIHUB-655-35-EZ-K is compatible with the Dexter Trailer Axle Beam with EZ Lube Spindles # T3584F-EZ-8974 because the hub uses a # L68149 inner bearing and a # L44649 outer bearing. These hubs come with lug nuts included and the axle comes with the spindle nuts included. If you need mounting bolts to mount your axle to the leaf springs, you can use the U-bolt Kit for Mounting 3500-lbs Axles # APUBR-1.
view full answer... - Solution for Replacement Axle and 6 on 5-1/2 Hubs on Utility Trailer In order to add hubs with a 6 on 5-1/2 bolt pattern the lowest capacity hub or hub/drum assembly is going to be 3,500 lbs. Since we do not have a 3,500 lb axle that matches your measurements you could use the Timbren Axle-Less Trailer Suspension System # ASR3500S05. This system fits any frame width and will also replace/upgrade your suspension. The Timbren system has a weight capacity of 3,500 lbs and uses # L68149 inner and # L44649 outer bearings. This would allow you to use the # AKHD-655-35-EZ-K...
view full answer... - 60 Inch Axle Compatible with 6 on 5-1/2 Inch Idler HubsThe Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 60" Long - 2,200 lbs # T20BTR-EZ-6048 is not compatible with the Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 6 on 5-1/2 # AKIHUB-655-35-EZ-K. If you are looking for an axle that length with a 6 on 5-1/2 bolt pattern, then you will need to use the Timbren Axle-Less System # ASR1THDS02. This will allow you the custom length when utilizing a 2 inch square bar (not included) cut to length in the integrated holes of the...
view full answer... - Upgrading Components of Harbor Freight Trailer To Allow ST235/80R16 TiresTo put ST235/80R16 tires like the Provider ST235/80R16 Radial Trailer Tire w/ 16" White Mod Wheel - 6 on 5-1/2 - LR E # TA39VR onto your Harbor Freight Trailer, you would need to upgrade the hubs of your axle to 6 on 5-1/2 inch as that or 8 on 6-1/2 inches are the two bolt patterns available for that size tire and wheel. That would require a minimum axle size of 3500 lbs like # T3584F-8974 and add hubs like the Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 6 on 5-1/2 # AKIHUB-655-35-EZ-K. We...
view full answer... - Availability of 10 Inch Diameter Brake Assembly for Hub/Drum with 6 on 5-1/2 Bolt PatternWe do indeed have brake assemblies that would be compatible with a 3.5K axle using a 10 inch hub/drum with a 6 lug on 5-1/2 inch bolt circle. For a right hand assembly, I'd recommend self-adjusting brake assemblies # AKEBRK-35R-SA for the right side and # AKEBRK-35L-SA for a left hand. The assemblies are compatible with a standard 4 bolt mounting flange. Mounting hardware is sold separately as part # BRKH10BS. If you're needing brake drums as well, you'll need # AKHD-655-35-EZ-K which...
view full answer... - What Hubs Do I Need To Work With The Timbren Axle-Less Suspension System # ASR1THDS01?The Trailer Idler Hub Assembly # AKIHUB-655-35-EZ-K is the correct fit for the Timbren Axle-Less Trailer Suspension System # ASR1THDS01. It has the E-Z lube cap and the 6 on 5.5" lug pattern. If you are in need of a braking axle the Trailer Hub and Drum Assembly # AKHD-655-35-EZ-K is the hub you will need. You can pair this with the Electric Trailer Brake Kit # AKEBRK-35-SA for self adjusting drum brakes.
view full answer... - What Hubs Are Needed To Install 6 on 5-1/2" Lug Wheels On a 2018 NuCamp TAG Camping Trailer? To install the Westlake ST235/75R15 Off-Road Tire w/ 15" Liger Aluminum Wheel # LH46FR on your 2018 NuCamp TAG XL camping trailer you will need to replace your axle. The Timbren Axle-Less Trailer Suspension System # ASR1THDS02 has the same 2,200lb capacity as your current Dexter axle with a #84 Spindle that will allow you to fit the Easy Grease Trailer Idler Hub Assembly # AKIHUB-655-35-EZ-K. This hub has the same 6 on 5-1/2" lug pattern as the Liger aluminum wheels you selected. You current...
view full answer... - Recommended Hub and Drum Assembly with 6 on 5-1/2 Bolt Pattern for 2-132, 3,500 Pound AxleThe etrailer.com Trailer Hub and Drum Assembly # AKHD-655-35-EZ-K referenced in your question is the correct replacement for the idler hub # AKIHUB-655-35-EZ-K. The Hub and Drum Assembly has a 6 on 5-1/2 bolt pattern and is designed for 3,500 pound E-Z Lube trailer axles with #84 spindles. An idler hub and a hub and drum assembly are both going to mount onto the spindle the same way. There will not be any difference in the location, either further out or in, of where the wheel will mount...
view full answer... - Replacement Trailer Hub Assemblies For 3,500LB Axles Using L68149 Inner and L44649 Outer BearingsWe will have several different pre packed hub assemblies for you to choose from depending on if you need a hub for drum brakes or hubs for an idler axle. Here is a list of hubs for both drum and idler axles in the different bolt patterns that use the Outer Bearing # L44649 and Inner Bearing # L68149. All the kits include both a solid grease cap and one with a removable insert for easy grease spindles. Easy Grease Trailer Hub and Drum Assembly, 5 on 4-1/2" # AKHD-545-35-EZ-K Easy Grease...
view full answer... - Idler Hubs Compatible With Timbren Axle-Less Trailer Suspension # ASR2KHDS03The Timbren Axle-Less Trailer Suspension # ASR2KHDS03 uses the larger #84 size spindle which is commonly found on 3,500lb axles. I recommend using either the 5 on 4-1/2" Hub # AKIHUB-545-35-EZ-K or the 6 on 5-1/2" Hub # AKIHUB-655-35-EZ-K. Since the Timbren is capable of being used with up to a 235/85R16 # AM35010 wheel and tire you may need the larger bolt pattern.
view full answer... - Hub Assembly Needed for Timbren Axle-Less Trailer Suspension SystemThe Trailer Idler Hub Assembly for 3,500 lb Axles, part # AKIHUB-655-35-EZ-K will fit with both the Timbren Axle-Less Trailer Suspension System, # ASR3500S05 and the Timbren # ASR1THDS02 I cross referenced the bearings, races and seal measurements and they are all a match. The hub also has a 6 on 5-1/2 inch bolt pattern so you are good to go. I have provided a video link for the Timbren Axle-Less Suspension for your review.
view full answer... - Inner Hub Diameters To Fit Old Trailer AxleOn the Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 6 on 5-1/2 # AKIHUB-655-35-EZ-K, the inside dimensions of the hub is based on the bearings and races. If you are looking for the inner diameter of the bearings and grease seal to ensure a fit on your spindle, here are the dimensions: Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Grease seal (included): 58846 Inner diameter: 1.719" Outer diameter: 2.565" which is equal to hub bore The...
view full answer...
- Upgrading to 6 Lug Hubs on Dexter 3,700 Lb AxleThe Dexter 3,700 Lb Axle uses an L68149 inner bearing and a L44649 outer bearing so yes, you can get these bearings with a 6 on 5-1/2" bolt pattern. I am not sure if you're after a hub or hub/drum so I have attached our complete selection below. The Easy Grease Trailer Idler Hub Assembly part # AKIHUB-655-35-EZ-K for example is a great option if you need an idler hub or the Easy Grease Trailer Hub and Drum Assembly part # AKHD-655-35-EZ-K if you need a hub/drum. These both have a 6 on 5-1/2"...
view full answer... - Hub With 6 on 5-1/2 Bolt Pattern That Fits 3,500 lb Timbren Axle-Less Trailer SuspensionYes, the idler hub you asked about does fit the standard 3,500 lb Timbren Axle-Less system you asked about. The hub uses the same size bearings and grease seal that fit the spindle on the Timbren system, so the following two parts are compatible: - Timbren Axle-Less Trailer Suspension System - Straight Spindle Only - 3,500 lbs # ASR3500S05 - Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 6 on 5-1/2 - Pre-Greased # AKIHUB-655-35-EZ-K That said, the HD version of the 3,500 lb...
view full answer... - Timbren Axle-Less Suspension Comparison & Recommendation For A Custom Overlanding TrailerThe difference between the Timbren Axle-Less Trailer Suspension System ASR1200S01 and the Timbren Axle-Less Trailer Suspension System # ASR1200S02 is that ASR1200S01 is designed for off-road tires, and # ASR1200S02 is made for regular tires. The Dexter Trailer Idler Hub Assembly # 8-91-05UC1-EZ is the appropriate hub assembly for ASR1200S01 and # ASR1200S02. The Timbren Axle-Less Trailer Suspension System # A12RS440 is the same as # ASR1200S02, but this system also has hubs included. There...
view full answer... - Recommended Trailer Wheels for Use with Timbren Axle-Less Suspension ASR3500S06Vehicle wheels and trailer wheels have different construction and it is generally not recommend to use either type in the other application. For use with Timben Axle-Less Suspension # ASR3500S06 you can use any of the idler hubs shown on the linked page. These are available in a number of wheel bolt patterns, including the 6-lug trailer spec pattern 6-on-5-1/2 like the part # AKIHUB-655-35-EZ-K you referenced. On these you can use any Load Range D 15-inch wheel/tire item shown on the other...
view full answer... - Availability of Hub With 6 on 5-1/2 Bolt Patter for 2k or 3.5k AxleThere are hubs that have a 6 on 5-1/2 bolt patter that will fit a 3,500 lb axle. You won't find any for a 2k axle. The Trailer Hub and Drum Assembly # AKHD-655-35-K and Easy Grease Trailer Hub and Drum Assembly # AKHD-655-35-EZ-K both have a 6 on 5-1/2 bolt pattern. For brakes you can use the # AKEBRK-35-SA. If you only want idler hubs you would use the # AKIHUB-655-35-K or # AKIHUB-655-35-EZ-K instead. All of these hubs use # L68149 inner and # L44649 outer bearings commonly found on...
view full answer... - Recommended Timbren Axle-Less System for 6 on 5-1/2 inch HubsYes, I would be happy to. The Timbren Axle-Less Trailer Suspension item # ASR3500S05 uses inner bearing item # L68149 and outer bearing item # L44649. To add an idler hub or brake drum assemblies with a 6 on 5-1/2 lug pattern you will need the following parts: Idler Hub - Easy Grease Trailer Idler Hub Assembly item # AKIHUB-655-35-EZ-K Hub and Drum Assembly - Easy Grease Trailer Hub and Drum Assembly item # AKHD-655-35-EZ-K These are rated for 3,500 lbs axles and are sold individually....
view full answer... - What is the Thread Pitch Of The Lug Nuts On The etrailer.com AKIHUB-655-35-EZ-K HubsThe lugs on the etrailer.com Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 6 on 5-1/2 - Pre-Greased # AKIHUB-655-35-EZ-K will indeed be 1/2"-20. This will be the standard used on 1/2" studs on trailer hubs. If you were also looking to lock your wheels to the # AKIHUB-655-35-EZ-K, the Redline Wheel Lock Set for 1/2" Wheel Bolts # RG01-150 will fit right on and includes 1 key and 2 locks.
view full answer... - Idler Hub So That I Can Use 5x5.5 Bolt Pattern Jeep Wheels on My Off-Road TrailerThe lug studs on the Trailer Idler Hub Assembly # AKIHUB-555-35-K are 1/2" studs, which should match the studs used on your Jeep wheels. From what it sounds like, you're trying to replace the hubs on a trailer to use the wheels from a Jeep? While the studs may match up, the wheel offset is going to potentially cause a problem. You'll need to make sure you have enough space between the hub face and the frame to use the negative offset that vehicle wheels come with. You might be best served...
view full answer... - Replacement Drop Axle for Old Horse Trailer with 6 on 5-1/2 Inch Bolt PatternI would love to help but we do not have any trailer hubs that correspond to the dimensions that you provided. Therefore, the only option we can offer you would be to replace the axle all together. In order to offer a replacement for this we would need to know your spring center and hub face measurements (see photo). If you can provide me with these I can then see if we have an axle suitable for your trailer. For example, the Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindle part...
view full answer...
- Is There A 60" Hub Face Axle That Will Allow Me To Use A 6 on 5-1/2" Wheel Hub?I have a couple options that may help you to get the correct hub size as there is not one that is a direct fit for the Dexter Trailer Idler Axle Beam with EZ-Lube Spindles # T20BTR-EZ-6048. First the #84 E-Z Lube Spindle w/ Brake Flange # TRU74FR can be welded on in place of the smaller spindles that come on the Dexter axle. This will give you a spindle that is traditionally found on a larger 3,500lb axle and allow you to use the 6 on 5-1/2" Trailer Idler Hub Assembly # AKIHUB-655-35-EZ-K....
view full answer... - Is Idler Hub With 6 on 5-1/2 Inch Bolt Pattern Available for 3500 lb AxleIf your existing axle does indeed have a 3500 lb capacity, the # AKIHUB-655-35-EZ-K idler hub which has a 6 on 5-1/2 inch bolt pattern. You can confirm whether you have a 3500 lb axle by pulling one of the hubs, removing the inner and outer wheel bearing and examining the sides of the cages that hold the roller bearings. There will be a reference number engraved on the side of the bearing cages. If the numbers read L68149 on the larger inner bearing and L44649 on the smaller outer bearing,...
view full answer... - Availability Of Hubs That Will Work With An OEM Ford Bronco WheelIt may be possible to use a Timbren Axle-Less setup like the # ASR3500S05 along with a hub 6 on 5-1/2" hub # AKIHUB-655-35-EZ-K. The bronco wheels should use the same standard 6 on 5-1/2" bolt pattern. However, in order to use the hubs, the wheel will need to have a center hole larger than 3" in diameter. All of the hubs we carry will have a portion that protrudes thru the center hole, so generally only trailer wheels will be compatible with trailer hubs.
view full answer...
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Adam R
Edited by:
Lindsey S
Installed by:
Jeff D
Installed by:
David F
Video Edited:
Jacob T
Video by:
Dustin K
Updated by:
Wilson B
Updated by:
Mike S
Written by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
David C.
2/25/2018
These hubs work great. I got them because I wanted my trailer bolt pattern to match my Toyota Tacoma. It has worked out great so far.