bing tracking image
  1. Trailer Hubs and Drums
  2. etrailer
  3. 6 on 5-1/2 Inch
  4. For 6000 lbs Axles
  5. 14-1/2 Inch Wheel
  6. 15 Inch Wheel
  7. 16 Inch Wheel
  8. 16-1/2 Inch Wheel
Trailer Idler Hub Assembly for 6,000-lb Axles - 6 on 5-1/2 - Pre-Greased

Trailer Idler Hub Assembly for 6,000-lb Axles - 6 on 5-1/2 - Pre-Greased

Item # AKIHUB-655-6-K
Our Price: $78.31
Trailer Hubs and Drums
Shipping Weight: 15 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Need help with installation?
Locate installers near me
Hub is designed for use on trailer idler axles. Fits 6,000-lb axles with #42 spindles. Inner bearing (25580) and race, outer bearing (15123) and race, grease seal, grease cap, and lug nuts included. Great Prices for the best trailer hubs and drums from etrailer. Trailer Idler Hub Assembly for 6,000-lb Axles - 6 on 5-1/2 - Pre-Greased part number AKIHUB-655-6-K can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (33)
  • Q & A (0)
  • Photos

etrailer by AxleTek Trailer Hubs and Drums - AKIHUB-655-6-K

  • 6 on 5-1/2 Inch
  • For 6000 lbs Axles
  • 14-1/2 Inch Wheel
  • 15 Inch Wheel
  • 16 Inch Wheel
  • 16-1/2 Inch Wheel
  • Hub
  • 1/2 Inch Stud
  • Pre-Greased
  • Standard
  • 15123
  • 25580
  • etrailer

Hub is designed for use on trailer idler axles. Fits 6,000-lb axles with #42 spindles. Inner bearing (25580) and race, outer bearing (15123) and race, grease seal, grease cap, and lug nuts included.


Features:

  • Trailer hub assembly fits idler axles
    • Bearings, races, seal, grease cap, and lug nuts are included
  • Sturdy iron construction
  • Zinc-enriched paint finish
  • Pre-greased idler hub is easy to install - no need to pack bearings
    • Lithium complex, multipurpose grease keeps bearings lubricated
  • QAI and CSA certified


Specs:

  • Application: 6,000-lb trailer axles with #42 spindles
    • Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO
  • Wheel size: 14" to 16-1/2"
  • Bolt pattern: 6 on 5-1/2"
  • Wheel stud dimensions: 1/2" diameter x 1-1/4" long
  • Grease cap flange diameter: 2.446"
  • Weight capacity: 3,000 lbs
  • Limited 1-year warranty


Bearing, Race, and Seal Information

  • Bearings (included)
    • Inner bearing: 25580 (1.75" inner diameter)
    • Outer bearing: 15123 (1.25" inner diameter)
  • Races (included)
    • Inner race: 25520
    • Outer race: 15245
  • Grease seal (included): GS2250DL
    • Inner diameter: 2.25"
    • Outer diameter: 3.376"

Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.


Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)


Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)


Bolt Pattern - Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"


KH-655-07-19 AxleTek Trailer Idler Hub Assembly for 6K Axle with Hardware - 6 on 5-1/2 - Pre Greased

Compare to Dexter 42655UC1





Customer Satisfaction Score:


Customer Reviews

Trailer Idler Hub Assembly for 6,000-lb Axles - 6 on 5-1/2 - Pre-Greased - AKIHUB-655-6-K

Average Customer Rating:  4.6 out of 5 stars   (33 Customer Reviews)

Hub is designed for use on trailer idler axles. Fits 6,000-lb axles with #42 spindles. Inner bearing (25580) and race, outer bearing (15123) and race, grease seal, grease cap, and lug nuts included.

by:

i called and bought 2 more hubs thanks



by:

Great quality, great prices. I converted an old gooseneck trailer from the open center mobile home-style hubs to modern 6k hubs on a budget. These hubs fit in place of the old hubs on the rear axle, which I chose not to install brakes on.



by:

Best company to deal with. Wasn't sure witch hubs I needed so called them an they found what I needed. Best customer service an product.



by:

Trailer hubs are working great despite being immersed in salt water regularly.



by:

This is the second time that I have ordered from etrailer. The first idler hub is still working fine on my boat trailer. I use the trailer to haul my boat to the Salish Sea off Port Angeles. The trailer is immersed in salt water every time I launch and retrieve the boat.



by:

Complete accurate and overall fast and speedy shipping, couldn’t find this product anywhere even local trailer dealers, but Etrailer.com had these, I would buy from them again !!!



by:

Everything I needed with convenient shipping and reasonable pricing!



by:

I am very happy with Etrailer, Great service and delivery. Lots of information to help me get the hubs I needed to change over from mobile home wheels to standard 6 lug trailer wheels. Shipping was fast and I even received a phone call before they shipped, because the address they were sent to did not match the billing address.
Thanks etrailer, Gary B



by:

We use etrailer for nearly every component of the custom trailers we fabricate. Great parts, great service and great prices.



by:

restoring an old trailer, these went on without a hitch.



by:

Good Product easy to install. Use the assembly every day. No problems with it for over a year.



by:

The hubs replaced my old rusted ones perfectly. I selected two day shipping when I ordered on Saturday but I didn't receive the order until Wednesday. The box was damaged and one of the caps were damaged by the hub because of not enough packing material in the box.



by:

Great fit and finish. Fitment is perfec t.

Kent B.

10/8/2020

Still working with no problems



by:

I'm missing a spindle

Etrailer Expert

Jenny N.

2/15/2022

I will have our customer service team reach out to you.



by:

Everything exactly as advertised, excellent service, shipping, pricing, well pleased.



by:

All four still rolling after a year and multi salt water dunks



by:

Great service! Great products! Thanks!



by:

All 6 arrived arrived. Will assemble and see how it works



by:

perfect fit .easy install.they even looked up an old order almost two yrs to get part number for me



by:

Unbeatable product and price



by:

Great product killer service fast delivery



by:

Great quality, very prompt delivery



by:

Fast shipping ,great service , pricing good



by:

You are excellent thanks



by:


25
33
Show More Reviews

See what our Experts say about this etrailer Trailer Hubs and Drums

  • Replacement Trailer Hub Assembly That Uses Bearing Sizes 15123, and 25580
    The CE Smith Trailer Idler Hub Assembly # CE13611 will not fit your trailer with the hub bearings 15123 and 25580. Your hub bearings are most commonly found in 6,000lb axles and will require one of the following hubs. etrailer Trailer Idler Hub Assembly # AKIHUB-655-6-EZ-K for an EZ Lube axle etrailer Trailer Idler Hub Assembly # AKIHUB-655-6-K for a standard spindle Both of these hub assembly's will include new inner and outer bearings and races, lug nuts, grease caps, and a 2.25"...
    view full answer...
  • Which 6 Lug Trailer Hub Does Best in Saltwater Application
    Since the # AKIHUB-655-6-K is just painted steel it would not be my first choice for a saltwater application as it would pretty quickly start to corrode. The absolute best option would stainless steel like the Kodiak part # KH42655S as stainless steel won't corrode. Next best option would be the galvanized part # 8-213-51UC1 which won't be as resistant to corrosion as stainless but would do a much better job than just paint as it's a zinc coated steel which does a pretty decent job with...
    view full answer...
  • How To Upgrade Old Dexter Axle From 5 on 5 Inch to 6 on 5-1/2 Inch Bolt Pattern
    It looks like you have the Dexter Trailer Hub and Drum Assembly part # 8-174-5UC3 which is for old 6,000 lb to 7,000 lb axles that have the 5 on 5" bolt pattern. If that is the case then you can use the Trailer Idler Hub Assembly part # AKIHUB-655-6-K and the 10-10 Grease or Oil Double-Lip Seals part # RG06-090 to switch to a more common 6 on 5-1/2" bolt pattern. In order to confirm the above, you simply need to find the axle tag and look for the weight capacity and or serial number or...
    view full answer...
    Image 1 for
  • Will Trailer Hub Assembly part # 42655UC1-EZ Fit a Spindle TRU57FR
    Yes, the Hub part # AKIHUB-655-6-K that you referenced is a fit for the spindle part # TRU57FR that you also referenced.
    view full answer...
  • How to Determine the Replacement Hubs for a 2002 Magic Tilt Trailer
    To determine what the correct replacement hubs are for your Magic Tilt trailer there is a little bit of information that we will need. We will need to find out inner diameter of both the Inner and Outer Bearings as well as the inner diameter of the Grease Seal. To ensure that your current wheels are compatible with the hub that you get you will need to make sure that you also have the appropriate bolt pattern on your hub. If you remove one of your current hubs you should be able to see...
    view full answer...
    Image 1 for
  • Can The Hubs On Mobile Home Axles Be Changed To Use Conventional Trailer Wheels and Tires?
    Your mobile home axle uses a specific spindle which is not compatible with a more traditional hub like the Assembly # AKIHUB-655-6-K you found. You will want to find an entire replacement axle like the Dexter # 7461121-EB. If you can provide me with the dimensions on your axle I can help you locate a replacement.
    view full answer...
  • Idler Hub with 6 on 5-1/2 inch Bolt Pattern Recommendation for Timbren System # ASR35HDS02
    I have a solution for you, but the # 84655UC1-EZ will not fit on the spindles of the # ASR35HDS02. For a similar idler hub that is confirmed to fit you would want the # AKIHUB-655-6-K. This is an idler hub with the same bolt pattern that will fit the spindles of the Timbren.
    view full answer...
  • Availability of 6k Trailer Hub with 6 Lug Bolt Pattern Pre-Greased
    We have pre-greased 6k trailer hubs with 6 on 5-1/2 inch bolt patterns like the etrailer part # AKIHUB-655-6-K but we do not have any that are galvanized. This would still work great in a marine application though.
    view full answer...
  • Recommended Spindle, Idler Hub, Wheels and Tires For Homemade Cart Trailer Off Road Use Only
    We have the #42 Spindle # TRU57FR that you can weld to your trailer. It is a 2-1/4" round stub as we do not have any square stub spindles that are rated for over 2,500lbs per spindle. With these spindles you can use the Trailer Idler Hub Assembly # AKIHUB-655-6-K since you do not need a braking hub. The hub is 6 on 5-1/2" as the 5 lug wheels are not strong enough for the 10,000lb capacity that you are needing. The Loadstar ST225/75D15 Bias Trailer Tire with 15" White Wheel # AM3S870...
    view full answer...
  • Replacement Hub Assemblies For A 2007 Four Winns Trailer Axle
    I have a few hub and drum assembly options for you however, we currently do not offer an oil bath hub and drums that matches the specs you have provided. If you'd like to replace your oil bath hubs with a standard grease hub, I do have a few kits that will include everything you need to install new hubs, bearings, and grease seals on your trailer. I recommend using the Trailer Idler Hub Assembly for 6,000-lb Axles part # AKIHUB-655-6-K as this is our most cost effective kit we have available. You...
    view full answer...
  • Spindle and Hub for 6,000 Pound Axle
    You will want part # TRU57FR for your standard spindle that is compatible with the hub # AKIHUB-655-6-K you mentioned. Another option is # TRU67FR which is an agricultural spindle to fit the 6k capacity. The hub compatible with this spindle is the # AH60880FCOMP.
    view full answer...
  • Axle-Less Suspension Setup for 2,000 lb Trailer that Have 6 on 5-1/2 inch Bolt Pattern Hubs
    I have a solution for you, but it will require you to go up to the 3,500 lb version of the Timbren. For that you would want the # ASR35HDS02 and then for hubs part # AKIHUB-655-6-K.
    view full answer...
  • Availability of Independent Suspension Trailer Axle Kit for Off-Road Trailer with 6 Lug Hub
    Sounds like you may be looking for an axle kit like the Timbren Axle-Less part # ASR35HDS02. This is a 3,500 lb axle setup that has a 4 inch lift built into it and is spaced out for off-road tires. For an idler hub that fits it with a 6 on 5-1/2 inch bolt pattern we have the part # AKIHUB-655-6-K.
    view full answer...
  • Replacement Hub and Spindle For Trailer Using Tapered Spindle With Timken 24780 and 10183 Bearings
    I do have a recommendation for you as we do not carry a hub which will work with your current spindle. Instead you can replace your spindles with the more commonly found #42 Spindle # TRU57FR. This will allow you to easily slide on a hub for a 6 on 5-1/2" Bolt Pattern # AKIHUB-655-6-K or one with the 8 on 6-1/2" bolt pattern # AKIHUB-865-7-2-K. Both these hubs include pre packed bearings, races and grease seals for easy installation.
    view full answer...
  • Can 5-Spoke Utility Hub Be Replaced with Hub with Standard Bolt Pattern
    We have some hubs that can replace the 5-Spoke utility-style you're currently using, but they use a 6 lug pattern which actually works out because you'll need to replace your wheels for your tires anyways. To increase your tire size I recommend a 235/80-16 tire (which reduces your clearance by 2" altogether) so for a complete set of parts you'll need the following: - Trailer Idler Hub Assembly # AKIHUB-655-6-K - Trailer Hub and Drum Assembly # AKHD-655-6-K - 10-10 Grease or Oil Double-Lip...
    view full answer...
    Image 1 for
  • Thread Pitch of Studs on Trailer Hub # AKIHUB-655-6-K
    The trailer hub part # AKIHUB-655-6-K that you referenced uses standard 1/2 inch trailer wheel studs like the part # 165981. This is a coarse thread (UNC) with a thread pitch of 1/2 inch x 13 threads.
    view full answer...
  • Hub Recommendation for the Timbren Axle Less System part # ASR35HDS02
    For a hub drum that would fit the Timbren Axle Less System part # ASR35HDS02 you would want the # 8-201-9UC3-EZ. For an idler hub you would want the # AKIHUB-655-6-K.
    view full answer...
  • Timbren Axle Less System Recommendation that Can Fit 6 Lug Trailer Hubs
    Sounds like you have hubs like either the # 8-201-9UC3-EZ which is a hub/drum or the # AKIHUB-655-6-K which is an idler hub. Both hubs use the # 25580 inner and # 15123 outer bearing, which is compatible with the spindle used by the Timbren # ASR35HDS02 axle-less suspension that would give you an independent suspension setup.
    view full answer...
  • Can Hub AKIHUB-655-6-K be Used in Place of Hub 8-213-5UC1
    You can use hub # AKIHUB-655-6-K provided that the larger seal is a proper fit for your spindle. The smaller one included with hub # 8-213-5UC1 would provide a tighter fit but if your current seal inner diameter is 2-1/4 inches then hub # AKIHUB-655-6-K will be fine. If it is smaller then the larger seal would cause grease to leak out.
    view full answer...
  • Pilot Diameter for etrailer Hubs # AKIHUB-655-6-K and # AKIHUB-865-7-2-K
    There is no brake mounting flange on either the Trailer Idler Hub Assembly part # AKIHUB-655-6-K or part # AKIHUB-865-7-2-K. These simply mount onto the your spindle. If you are talking about the overall diameter of the plate that the bolts are installed on then part # AKIHUB-655-6-K measures about 7-1/4" and part # AKIHUB-865-7-2-K measures about 8-1/2". Part # AKIHUB-655-6-K has a 6 on 5-1/2" bolt pattern, is compatible with 16" to 18-1/2" wheels, and has a pilot diameter of 3-1/8" at...
    view full answer...
  • Which Hub Assembly is Compatible with the Agricultural Spindle # TRU34FR
    Although the outer bearing of the # AKIHUB-655-6-K hub assembly will fit, the inner bearing will be too large. Instead, you'll need the Complete Agricultural Hub Assembly, # AH30660FCOMP, which is designed to fit the agricultural spindle # TRU34FR. I've attached a couple of review videos for you to check out.
    view full answer...
  • Replacement Bearings 2788 and 1779
    Bearing # 2788 has an inner diameter of 1.50-inches and fits race # 2729. Bearing # 1779 has an inner diameter of 0.938-inches and fits race # 1729. We do offer all of these bearing and race parts and if you wish you can install new bearings in your current hubs. The idler hub you referenced, part # AKIHUB-655-6-K, uses different bearings that have different dimensions. The bearings in this hub are inner bearing # 25580 (1.75-inch inner diameter) and outer bearing # 15123 (1.25-inch inner...
    view full answer...
    Image 1 for
  • How to Select Correct Replacement Idler Hubs for Trailer
    When substituting new hubs you need to match several things: the axle capacity, the wheel bolt pattern and the bearing set used inside the hub. Bearing dimensions can be used instead of the bearing part numbers but the part numbers are the best way to ensure the new hub will fit properly on your spindles. Matching the inner and outer bearing numbers ensures compatibility. You can also measure your current hubs' outside-to-inside depth (the distance from the outer bore where a grease cap...
    view full answer...
  • Recommended Wheels and Tires for 6 on 5-1/2 Inch Idler Hubs
    The Trailer Idler Hub Assembly for 6,000-lb Axles - 6 on 5-1/2 - Pre-Greased # AKIHUB-655-6-K will work well with wheels like the Karrier ST225/75R15 Radial Trailer Tire w/ 15" Modular White Wheel - 6 on 5-1/2 - Load Range D # AM32673 each of which are rated for 2,540 lbs. You won't have any issues with speed on these as anything with that bolt pattern will be rated for highway speeds and the holding weight will be above what you need for the shipping container.
    view full answer...


< Previous
12



Do you have a question about this Trailer Hubs and Drum?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Jeff D
Installed by:
Jeff D
Employee David F
Installed by:
David F
Employee Dustin K
Video by:
Dustin K
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Hannah L
Updated by:
Hannah L

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.