Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
(453 reviews)
Price: $200.73
In Stock
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # 75684
Retail:$320.73
Our Price: $200.73
You Save: $120.00
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (453)
- Q & A (0)
- Photos
Draw-Tite Trailer Hitch - 75684
- Class IV
- 2 Inch Hitch
- 3500 lbs GTW
- Visible Cross Tube
- Draw-Tite
- 350 lbs TW
- 5000 lbs WD GTW
- 500 lbs WD TW
- Custom Fit Hitch
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Computer-aided, fully welded steel construction ensures strength and durability
- Tested Tough - safety and reliability criteria exceed industry standards
- Easy, bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish covers e-coat base for superior rust protection
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 3,500 lbs
- Maximum GTW when used with weight distribution: 5,000 lbs
- Maximum tongue weight: 350 lbs
- Maximum TW when used with weight distribution: 500 lbs
- Maximum gross trailer weight: 3,500 lbs
- Limited lifetime warranty
Draw-Tite Tested Tough
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
75684 Draw-Tite Class 3 Trailer Hitch Receiver - Max-Frame
87574 Hidden Hitch Class 3 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2010 - 2012 Hyundai Santa Fe
- 2011 - 2013 Kia Sorento 4-cylinder models
- 2011 - 2013 Kia Sorento EX V6 with Factory Tow Prep Package
- 2011 - 2013 Kia Sorento EX V6 without Factory Tow Prep Package
- 2012 - 2013 Kia Sorento LX V6 with Factory Tow Prep Package
- 2011 - 2013 Kia Sorento LX V6 without Factory Tow Prep Package
- 2011 - 2013 Kia Sorento SX V6 with Factory Tow Prep Package
- 2011 - 2013 Kia Sorento SX V6 without Factory Tow Prep Package
California residents: click here
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- Product did not meet expectations
Customer Reviews
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" - 75684
Average Customer Rating: 4.8 out of 5 stars (452 Customer Reviews)
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.by: Dale04/04/2024
Product was as advertised.
Packaging was not adquate to protect the hitch as both ends were sticking out and the hitch brackets were scraped looked like it had been dragged across concrete surface.
Recommend additional strap(s) to hold hitch within carton
by: Greg06/09/2022
Nice unit. Easy to install, hugs the bottom of the bumper, so it's not too low. Highly recommend if you want to tow with your Kia Sorento.
by: Dave03/21/2023
2013 Kia Sorento
Definitely take the time to use a tap to clean the threads on the vehicle before installing the hitch.
Dave
3/21/2024
Pulled a 10 foot single axle trailer with a loaded sidecar rig back from Indiana to Virginia. No problems. Very satisfied.
by: Janet R10/27/2022
2011 Kia Sorento
Ordered this hitch so a 2 ebike rack can be installed on my 2011 Kia Sorento. My husband was able to install the hitch within two hours and he was very impressed with the quality of it.
Janet R.
10/28/2023
Wonderful, the hitch fits perfectly on my Kia Sorento. Love it.
by: Russell M.01/28/2016
2012 Hyundai Santa Fe
i been hauling my keyboards and amps. in the back seat of my car for years, then i decided to buy me a small utility trailer to haul then in, i ordered my hitch on Sunday night and it was delivered to me on the following Wednesday morning, i had it installed the say day, and it took a couple young men maybe 20 minutes and the job was done, it looks very neat on my car and you don't know it's even there until you look for it, i am very happy that i chose etrailer, thank you so very much. Russell M.
Russell M.
1/28/2017
I am so surprised it has been a year ago, but everything is working out just fine, and will contimnue to use this set up, thanks again , Russell
by: VWLarry07/28/2013
Simple installaction, went in just like the online video showed. Had my 14 year old grandson help lift it in place. It's easier with 2 people, but not impossible for one. Took about 90 minutes to do the hitch and wiring, could have done it quicker if I had wanted to. Was not difficult at all and a very good product. Dealer wanted $700 to install a hitch and wiring, you saved me $450. Thank you.
Vwlarry
1/28/2015
Patrick, Good afternoon. I still love the hitch. Have had no problems at all. I have attached a picture of us in Atlanta getting fuel on a trip last summer from Jacksonville, FL to Bismarck, ND. The trailer pulled straight and all lights worked. Thanks to the great product your company provides. Thanks again.
by: John L.06/03/2011
2014 Kia Sorento
I have used Hidden Hitch before and have yet to be disappointed. Great, reliable products as far as I am concerned. Installation on my wife's 2011 Kia Sorento SX was straightforward. The muffler position added a degree of difficulty, but with the help of my 14 year old, it was on in under an hour.
I have had only two shopping experiences with etrailer.com but recommend them without hesitation. Great prices, great customer support, great follow-up, easy to find what you need, and easy to buy.
Will
2/23/2014
How do you lower the spare tire with the hitch frame on?
by: Wanda05/15/2024
The box was damaged and opened on each end. Some of the scratches can be attributed to that but there’s a few other really bad nicks with missing metal that looks as though that was package that was which is a shame. Unfortunately, I will not be referring any of my friends to your company.
Jenny N.
5/16/2024
I hate to see that the hitch arrived with scratches. The quickest way to fix is to touch it up with a rust resistant paint like Rustoleum to help protect it from rust. We can send a paint kit out to you.
by: Ashley Stotts07/11/2012
Great Price, easy installation, worked great!! Picture shows a trailer hitch cover that was purchased separately :-) Highly recommend this company and their products.
Jesse S.
7/27/2013
what about wiring harness do you have a video on that, Installation and Price
by: Charles H.08/26/2017
2013 Kia Sorento
I just installed the trailer hitch. I haven't towed anything yet but the installation wasn't bad. I didn't use a jack or anything.
TIP: Install the side of the muffler first. You will need to move the exaust to get the hitch bracket in and bolted. You can move it with your hand long enough to start the bolt. You will need a support or a helper to hold the other side. The product is solid and heavy. Installation took me 2 hours by myself. I would recomend that you spray the bolts and holes with WD-40.
by: Mike08/06/2014
2011 Kia Sorento
A lot easier than I thought. Installed the hitch on my 2011 Kia Sorrento to hold a carrier for my snow blower. Did it by myself without raising the car. Plenty of room. After getting together everything I needed, scratching my head and thinking things over, lowering the muffler, cleaning the rust from the holes and installing the hitch, it took 1 1/2 hours.
Lowered the muffler by prying the 3 rubber grommet things off (WD40 will help). Need to do this to get to the two bolts on that side. Also sprayed WD40 in the 4 threaded holes that are already in the frame and used a small wire brush to clean out rust.
Raised the hitch, on both sides, by putting it on cement blocks and wood 'til it was close enough to get the bolts (included) started. Started one bolt (do not tighten all the way). Moved over to the other side and installed the other two using a ratchet with 5/8" socket and the back to the other side and finished those two. That's it.
Remember to reattach the muffler back to the rubber grommets. Added an American Flag cover (also from etrailer) into the receiver :)
by: Jack07/05/2018
2011 Kia Sorento
The hitch is exactly what you expect it to be from the description provided by etrailer. The packaging from etrailer was surprisingly poor (see photos, this is how it was delivered). There is no way the box used could fit the hitch without tearing through the box, so it's funny that they send it this way. That said, other that a scuff hear or there, the packaging didn't really effect the hitch, it's a big sturdy piece of steel.
by: Ravi05/13/2022
This hitch worked out as expected. Great service from etrailer in answering all the questions i had.
Ravi
5/17/2023
No issues at all. As usual very sturdy after a years usage
by: ster06/29/2015
2011 Hyundai Santa Fe
Watched install video first. Reminded me to clean out weld nuts. Blocked the hitch up into position and it bolted right up. The muffler side was tight to work around but manageable. This hitch is way overkill for out #300 sailboat and trailer but was the least expensive.
by: GregT06/28/2018
The hitch arrived Thursday. I ordered it Tuesday. Having been over the videos and instructions, I had WD-40 and my battery terminal brush handy. They were not enough. I live in Wisconsin and drive a lot of dirt and sand roads, and Wisconsin uses corrosive salts to melt snow on the highways. First trip to the store resulted in the purchase of a .410 bore brush. That helped a lot, but not enough. Next trip to the store resulted in the purchase of a tap and die kit. $25 bucks for the set, and that made the difference. It was easy to clear the threads on the driver's side, but the muffler was in the way on the passenger side. I know, the videos show the heat shield and muffler moved over, but I don't have a tool for removing the hangars and was doing this job alone, in my gravel driveway. A large block of wood wedged inside the body pushed the muffler over enough that I could put a small wrench on the tap and get the threads clean on the passenger side. Then I pile 2x6 blocks and a few 1x's and managed to shim the whole unit into position. Threadlock was applied to the bolts and they were driven home with relative ease. I don't have powertools, jacks, ramps, or friends, so I suggest being nice to people who have that stuff and getting a little help. Installed in 4 hours, with most of that either driving or cleaning the holes. I think the actual bolt-on process took me about 40 minutes. My butt is kicked, but I beat the heat, the sun, the bugs, and the installation! Thanks etrailer. Tomorrow the bike rack is going in the I am off to the cabin!
by: Robert05/30/2018
2011 Hyundai Santa Fe
I am very happy with the product. Once I clean the bolt holes from 6 years of build up it was very easy to install. I am currently using it for a bike rack and pulling a trailer. I will be occasionally pulling a boat with it.
by: Reynaldo12/08/2020
2012 Kia Sorento
The hitch seems very sturdy. The box had a small hole but that was expected as this is a heavy and bulky item. The install seemed very easy but trying to get everything lined up took a few more minutes than i thought. I used some bricks and a jack and got everything lined up and bolted in. I would suggest screwing in the bolts a bit before you mount the hitch just to get a feel.
by: Jordan C.12/19/2011
Excellent service. The website gave me confidence that the hitch was proper for my car. Shipping was prompt. The hitch installed really easily and works great. Easy and quick even for car newbies such as myself.
by: Bobby M03/24/2023
2011 Hyundai Santa Fe
This review is for a 2011 Hyundai Santa Fe
Great heavy duty hitch. Me personally, I don't see how you can do this without re-tapping the threaded holes in the frame. I was unable to get the bolts started, even after oiling the threaded holes and cleaning them with a half inch wire brush on a drill. At first, I thought the bolts supplied were the wrong size. They were impossible to get started. So finally I had to re-tap the threaded holes in the frame.
Also, video doesn't show it, but you need to remove spare tire and unstrap and move muffler.
Fortunately I was able to put my car on a lift. I can't imagine how much more difficult this would be on the ground, or with car ramps.
After I wrestled with this thing for 2 hours, I finally got it together. You definitely need 2 people to bolt this up. It weighs a lot. It's a nice sturdy hitch. The challenging installation was not the hitch's fault. I recommend the hitch.
by: Daniel12/10/2018
2013 Kia Sorento
It’s been a great experience since I received it. It was a fast installation and easy as a 30min job. Definitely a two person job. Using it to haul a trailer across country.
by: Ron Melton11/26/2013
Great product and easy to install. A helper is needed due to the weight. Exact fit and nice installation. It took about 15 minutes to install.
The on line video was accurate and informative.
Buy with confidence.
by: Nick M.03/06/2011
Great piece of equipment for a great price with fast shipping and quick follow up. Two person job makes installation very easy at 10 minutes-- just had to screw in the bolts. Very pleased with etrailer.com and will definitely will bring my business back here.
by: James S.06/03/2011
The hitch installed in about half an hour on a hydraulic lift. There is a good inch between the hitch and the muffler.
by: Cody 05/14/2023
Solid build, good quality. Kinda wish it had lock washers instead of flat washers. But that’s my only complaint. Still very satisfied with everything
by: Keith F.06/19/2016
2010 Hyundai Santa Fe
I purchased a Thule 4 bicycle rack from etrailer but also needed a class III trailer hitch for my 2010 Hyundai Santa Fe. This specific trailer hitch was recommended for me from etrailers customer service when I had contacted them. Bill was very helpful to me so that I could find the right product for my car. This hitch required no drilling which was important to me and the level of difficult to install was a 3 out of 10. The hitch arrived in a huge box within 3-5 business days. This is the delivery option that I selected. This also arrived along with my Thule bike rack.
I had our local auto shop install the hitch for me so that it was done properly. My car already had predrilled holes on both sides of the frame. This was installed in about 30-45 minutes. You need someone to hold the hitch while a second person puts the bolts in the holes under the frame to secure it. The hitch is steel and is heavy and durable.
I would recommend this product and am very pleased with my purchase. Thank you etrailer.com.
Keith F.
1/17/2018
We love the trailer hitch and bike rack and get a lot of use out of it. They are both great products and work great. They are so easy to use as well. Please let me know if you need anything else or have any questions.
25
463
Show More Reviews
See what our Experts say about this Draw-Tite Trailer Hitch
- What Size are the Trailer Hitch Receiver Bolts and Weld Nuts on a 2012 Hyundai Santa FeThe weld nuts in your 2012 Hyundai Santa Fe will use Grade 5 bolts that are M10- 1.25 x 30. There is also another bolt, washer, and nut on each side required for the installation of the Curt # C13073. The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75684 will only use those four bolts and washers.
view full answer... - Can the Spare Tire be Removed on a 2013 Kia Sorento with a Trailer Hitch InstalledYes, to lower the spare tire you will need to angle it out and not try to drop it straight down. So you can remove/reinstall the spare tire with the # 75684 trailer hitch installed on your 2013 Kia Sorento. If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin and clip, and a carrying bag. For wiring, if you have a V6 SX model without factory tow prep package use # C59236.
view full answer... - Routing and Protecting Trailer Brake Magnet Wires when Adding Electric Brakes to a TrailerThere are many things to consider when adding electric drum brakes to a trailer. I have included a link to our FAQ article that covers everything you will need. As far as routing the wires, first, you can attach the ground wires for the magnets nearby to the frame leaving enough slack for the travel of the suspension. For the power wire you would come off the magnet and run the wire to the front of the trailer along the frame. You can use a combination of wire loom # 7509-1 and loom clamps,...
view full answer... - Platform Bike Rack Recommendation for Carrying a Electra Amsterdam with a 2010 Hyundai Santa FeI spoke to my contact at Swagman and he informed me that the note you are referring to is more of a guideline that came from people with carbon fiber framed bikes than a hard rule for you to follow. You would be totally fine to use your Electra Amsterdam bike as-is with the Swagman XC # S64650 on your 2010 Hyundai Santa Fe. Check out the review video I attached for this rack as well. If you do not have a hitch yet I would recommend the Draw-Tite part # 75684. I attached an install video...
view full answer...
- Hitch and Wiring Bracket Installation Instructions, Weight Capacities 2011 Kia Sorento 4 CylinderTo make this easy and clear, I will just answer your questions with numbered answers below. 1. According to the instructions for Draw-Tite hitch 75684, you will not have to remove or lower the spare tire in order to install the hitch. I have included a link to the instructions below. 2. The shorter bracket, part # 18140, should be sufficient. With it you will need the bracket that holds the 4-Way flat, part # 18144. 3. The cross-tube of the hitch on the passenger side is bent to allow...
view full answer... - Trailer Hitch and Wiring for a 2011 Kia Sorento EXFor your 2011 Kia Sorento there are Class II and Class III trailer hitches available. I recommend Class III because they have a 2 inch receiver which will afford you more accessory options and they are more stout and have higher capacities. The Class III trailer hitch I recommend is # 75684. It s rated for 350 pounds tongue weight, 3,500 pounds gross trailer weight. It is also rated for use with weight distribution. I have linked a video showing installation of this hitch for you. If...
view full answer... - Is the Spare Tire Accessible After Trailer Hitch Install on a 2012 Hyundai Santa FeAfter the Draw Tite hitch part # 75684 has been installed you will to angle the spare as you lower it to get it out so that it will clear the hitch cross tube.
view full answer... - Trailer Hitch and Weight Distribution System Recommendation for a 2011 Hyundai Santa FeIf you can make sure the 2009 Jay Feather Sport 165 Travel Trailer that you are interested in will stay below the tongue weight of your hitch with a WD system then the hitch would be fine to tow the trailer. You would then also need to check the owners manual of your vehicle to determine it's towing capacity and be sure to go by the lower figure as the overall capacity. We offer a trailer hitch for your Santa Fe # 75684 that can be used with a WD and has a TW of 500 lbs. The best way...
view full answer... - Which Hitch Fits 2012 Hyundai Santa FeWe have a similar Class III 2 inch hitch that fits your 2012 Hyundai Santa Fe with the Draw Tite part # 75684 but the # e98841 does not fit your vehicle.
view full answer... - Best Location for Trailer Connector Bracket on 2011 Hyundai Santa FeThe plate you see on the hitch (see photo) provides a mounting point for the trailer connector bracket. For a 4-pole connector, you would use # 18144. For a 5-pole, use # TR20046 and for a 6 or 7-way connector, use part # 18138. Hardware is included with the brackets. If you do not want to locate the connector at this location you may be able to remove a grommet in the spare tire compartment in the cargo area of your Santa Fe and locate it there.
view full answer... - Will Curt Trailer Hitch # C13073 Fit a 2010 Hyundai Santa Fe With Under Mounted Spare Tire CarrierIs the spare tire carrier you are referring to a factory option, or is it something you installed aftermarket? The Curt hitch # C13073 may work, as a space saver tire carrier is visible in the installation pictures, but it does have a closer fit than the Draw-Tite, as it runs above the exhaust. We do not have any confirmation on whether any of the hitches available for the 2010 Hyundai Santa Fe would or would not work with an aftermarket under mounted spare tire carrier. I would recommend...
view full answer... - Recommended Wiring for 2013 Kia Sorento LX with 4 Cylinder EngineIf your 4 cylinder 2013 Kia Sorento LX does not have the factory tow package, I recommend the Tekonsha T-One Vehicle Wiring Harness # 118506. This is confirmed to work with your vehicle and will allow you to install a 4-way connector needed to power your trailer's signal lights. The plug-in locations for installation are behind the driver and passenger side tail lights. I have attached the installation details for you to check out. If you do not yet have a trailer hitch installed on your...
view full answer... - Choice of Class III Hitch for Use with Bike Rack on 2011 Hyundai Santa FeYou are quite correct that of the three Class III hitches offered for your 2011 Hyundai Santa Fe, which can be seen on the link provided at right, only the Curt # C13073 has the specific requirement that a stabilizing strap be used with non-wheeled loads like bike racks to maintain warranty coverage. You also ask a very good question. All of these hitches carry identical tongue weight and towing capacities (350-lbs and 3500-lbs respectively) and although not required to maintain their...
view full answer... - Wiring Harness Install Video for 2012 Kia Sorento Base I4While we do have a video of a trailer wiring harness installation on a 2012 Kia Sorento, it is not for the Curt T-Connector Vehicle Wiring Harness # C56328. Instead, the video we have, which I have linked for you below, is of an installation of the Tekonsha T-One Vehicle Wiring Harness # 118506. Between the two harnesses, I highly recommend going with the Tekonsha for your 2012 Sorento. Not only have they proven to have the far more reliable harnesses, it also has the highest amp rating...
view full answer... - Installation of Draw-Tite Class III 2-Inch Hitch # 75684 On 2010 Hyundai Santa FeWhen installing the Draw-Tite Class III 2-Inch hitch, part # 75684 on the 2010 Hyundai Santa Fe, the mounting bracket bolts are above the muffler on the passenger side of the vehicle. The bolts are M10 x 1.25 and can be tightened with a torque wrench to the recommended torque settings listed in the instructions. If the bolts are hard to access you might try using a swivel head ratchet or wrench that will let you access the bolts. Also, in some hitch installations the removal of a rear...
view full answer... - What Size Trailer Hitch Cover is Needed for a 2010 Hyundai Santa FeWe have many hitch covers that will work in the Draw-Tite 2 inch Trailer Hitch, item # 75684. I have posted a link to a hitch cover that we carry that is compatible to a 2 inch receiver hitch. If your vehicle has a factory 1-1/4 inch hitch you will need a hitch cover designed for the 1-1/4 inch receiver opening. I have posted a link to one of these covers below also. I have also posted a link to our complete selection of hitch covers for you to review. Just be sure to select one that...
view full answer... - Will Curt Class III Trailer Hitch # C13004 Fit the 2011 Kia Sorento SXFor your 2011 Kia Sorento SX, the trailer hitch that is the least visible is the Curt Class III Round Tube Receiver Hitch # C13073. This trailer hitch sets 4-1/2 inches behind the rearmost point of the bumper. The Draw-Tite # 75684 trailer hitch sits 4 inches behind the rearmost point of the bumper. Curt's warranty on the # C13073 hitch requires that stabilizing straps be used with all non-trailer loads, such as bike racks and cargo carriers. For a stabilizing strap you can use part #...
view full answer... - What Size Thread Tap Is Needed To Clean the Trailer Hitch Weld Nuts on a 2011 Kia SorentoThe weld nuts inside your frame are M10 x 1.25" which means you can use the tap included with the 10 mm x 1.25 Tap and 8.8 mm Drill Bit to clean them. When doing the above you will want to be very careful and only use hand tools as it will be super easy to cross thread the weld nut.
view full answer... - Can a 2016 Jeep Cherokee Support 280 Pounds of Chair Lift and ChairAs long as your 2016 Jeep Cherokee has the 3.2 liter motor with the trailer tow package then it can support up to 450 pounds tongue weight which is more than enough for the chair lift and chair combined. If you have the 3.2 liter but do not have the factory tow package the vehicle is limited to 200 pounds tongue weight and the same goes for the 2.4 liter motor with or without the factory tow package. If you do have the 3.2 liter and factory tow package I recommend etrailer hitch # e73ZR...
view full answer... - Recommended Trailer Hitch Receiver For 2012 KIA Sorento To Use With Carpod Cargo CarrierI recommend that you upgrade your trailer hitch to the 2 inch Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III # 75684. This hitch will allow you to use the Carpod with a much more reasonable cargo load. The 24x48-3/4 Carpod Walled, Folding Cargo Carrier - 2" Hitches - w/ Lid, Bag, Rise Shank - 450 lbs # M2205-01-02 has a total weight of 54 lbs. This carrier will have a very limited weight capacity when you use an adapter like the # HTAD from your 1-1/4 inch hitch...
view full answer...
- Brake Controller Installation Wiring On 2011 Kia Sorento EXI called my contact at Tekonsha and asked about the brake switch wiring on your Sorento. They told me that the simplest way to solve the issue is to use a circuit tester like part # PTW2993 and find the brake light wire that runs either under the door sill on the driver side or can be on the passenger side under the door sill and tie into the brake light wire at that point. They said the wiring is different for the Sorento and this seems to be the best solution.
view full answer... - Trailer Hitch Recommendation for a 2011 Kia SorentoThe easiest way to know for certain whether a vehicle has the tow package or not is to check with a Kia dealer with your VIN. With that info they will know all of the options your vehicle was built with. Typically the tow package will include a trailer hitch at the rear of the vehicle and a trailer wiring harness like a 4-way or a 7-way. It looks like you are looking for a trailer hitch for your 2011 Kia Sorento EX. The good news is that the Draw Tite hitch part # 75684 would be the correct...
view full answer... - Trailer Hitch Recommendation for 2011 Hyundai Santa Fe for Thule Bike RackIf the bike rack you are buying was intended for a 2 inch trailer hitch then you'd want the Draw Tite hitch part # 75684 for your 2011 Hyundai Santa Fe. If instead it's designed for a 1-1/4 inch hitch you'd want the Draw Tite # 36511. I wasn't sure which hitch size the bike rack was designed for but it's best to go with a hitch size that matches it directly as using hitch adapters like the # HTAD can reduce capacity by 50% and add movement to the overall setup.
view full answer... - Curt Hitch C13073 versus Draw-Tite 75684 for 2011 Hyundai Santa FeCurt offers a round tube Class III receiver, part # C13073, but to satisfy their warranty requirements, a stabilizer strap # 18050 needs to be used for non-trailer loads like a bike rack or cargo carrier. If you intend on only using the receiver for towing, the Curt would be a good choice. The Draw-Tite # 75684 is constructed of square-tube steel. Because of the spoiler on top of the hatch, the stabilizer strap will not work well on the Santa Fe, so for a bike rack or cargo carrier, the...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Andrew S
Test Fit:
Brent H
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Andrew K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Patrick B
Video Edited:
Dustin K
Written by:
Lindsey S
Updated by:
Laura H
Updated by:
Leah S
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Amanda M
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Greg
6/12/2023
I have had this hitch for a year. Not much to say except it just works. Used it several times, and no issues.