bing tracking image
  1. Weight Distribution Hitch
  2. CURT
  3. 500 lbs
  4. Fits 2 Inch Hitch
  5. WD Only
  6. Includes Shank
Curt MV Weight Distribution System - Round Bar - 6,000 lbs GTW, 600 lbs TW

Curt MV Weight Distribution System - Round Bar - 6,000 lbs GTW, 600 lbs TW

Item # C17050
Retail:$501.95
Our Price: $332.64
You Save: $169.31
Weight Distribution Hitch
Shipping Weight: 81 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
This weight distribution system will help to evenly distribute the load over the axles of both your tow vehicle and trailer for a smooth, controlled ride. Includes round, forged steel spring bars and an adjustable shank. Hitch ball sold separately. Great Prices for the best weight distribution hitch from CURT. Curt MV Weight Distribution System - Round Bar - 6,000 lbs GTW, 600 lbs TW part number C17050 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (754)
  • Q & A (0)
  • Photos
  • Used (1)

CURT Weight Distribution Hitch - C17050

  • 500 lbs
  • Fits 2 Inch Hitch
  • WD Only
  • CURT
  • Includes Shank
  • Electric Brake Compatible
  • Surge Brake Compatible
  • No Sway

This weight distribution system will help to evenly distribute the load over the axles of both your tow vehicle and trailer for a smooth, controlled ride. Includes round, forged steel spring bars and an adjustable shank. Hitch ball sold separately.


Features:

  • Evenly distributes weight over axles of tow vehicle and trailer for improved stability and control
    • Creates a more level ride for both tow vehicle and trailer
  • Round spring bars are constructed of solid, forged steel for strength and durability
  • Adjustable spring bar tension - just switch links in lift chains to fine-tune
  • Desired tilt is achieved with traditional washer design
    • Add or remove washers from spacer rivet to tilt head up or down
  • Grease zerks in the head assembly make for simple maintenance
  • Powder coated steel resists corrosion
  • Snap-up lever eases hookup by reducing lifting required by trailer jack
  • System includes head assembly, adjustable shank, spring bars, lift brackets and chains, snap-up handle, pin and clip, and all necessary hardware
    • Hitch ball sold separately - requires 1-1/4" diameter shank


Specs:

  • Tongue weight: 500 lbs - 600 lbs
  • Maximum gross towing weight: 6,000 lbs
  • Application: 2" x 2" trailer hitch receivers rated for use with weight distribution systems
  • Lift bracket positioning: 31-3/16" back from center of coupler
  • Shank length: 12"
  • Maximum rise: 6"
  • Maximum drop: 2-1/2"
  • 1-Year limited warranty


Included w/ SystemRequired - Sold SeparatelyOptional Add-Ons
  • Adjustable Shank
  • System Head
  • Lift Brackets
  • Spring Bars
  • Lift Bar
  • Hitch Pin and Clip
  • Hitch Ball w/ 1-1/4" Diameter Shank
  • Bar-Style Friction Sway Control

Weight Distribution Diagram

Create a more stable ride for your tow vehicle and trailer with a weight distribution hitch. Adding spring bars to your towing system applies leverage, which transfers the load that is pushing down on the rear of your vehicle to all the axles on both your tow vehicle and your trailer, resulting in an even distribution of weight throughout. The result is a smooth, level ride, as well as the ability to tow the maximum capacity of your hitch.


Selecting a Weight Distribution System

The tongue weight rating is the most important factor in determining which size weight distribution system you should use. If the bars of the system you choose are rated too high for your setup, they will create a rigid ride, which can result in a bouncing trailer. If, on the other hand, the bars are not rated high enough, the system will be unable to properly distribute the weight, rendering it virtually useless.


To determine the proper weight rating for a weight distribution system, you must first determine your trailer's tongue weight. Then add to that the weight of the cargo behind the rear axle of your tow vehicle. These two measurements make up the tongue weight rating for a weight distribution system.


Forged Steel Spring Bars

The round spring bars are made from forged steel, giving them a distinct advantage over typical cast steel bars. Forging is a process where thermal and mechanical energy are applied to the steel, resulting in a finished product that is more resilient to impacts and is stronger in terms of shear strength. Simply put, these spring bars do a superior job of helping to hold your trailer in line because of their added strength and durability.


Built-In Grease Zerks

Built-in grease zerk on the Curt weight distribution system head assembly

The system's head features 2 built-in grease zerks so that you can easily lubricate the spring bars without having to remove them from the head assembly. The grease zerks are located on each of the shafts that encase the spring bars. Simply use a grease gun (sold separately) to inject grease into each of the zerks.



17050 Curt MV Round Bar Weight Distribution Hitch

Installation Details C17050 Installation instructions



Customer Satisfaction Score:


Customer Reviews

Curt MV Weight Distribution System - Round Bar - 6,000 lbs GTW, 600 lbs TW - C17050

Average Customer Rating:  4.6 out of 5 stars   (754 Customer Reviews)

This weight distribution system will help to evenly distribute the load over the axles of both your tow vehicle and trailer for a smooth, controlled ride. Includes round, forged steel spring bars and an adjustable shank. Hitch ball sold separately.

by:

Best weight distribution system I have ever used. Very strong and made towing a pleasure.



by:

Amy the Etrailer rep was outstanding & very helpful!

Donald

4/8/2024

Works as advertised, no problems. Good product.



by:

I'm giving this hitch a 5 star based not only on the hitch but my overall experiences with Etrailer. I have owned this hitch for a year.There are better weight distribution hitches out there, but I must say it's a great hitch for the money. It was fairly easy to install on my own and the set up is straight forward. I did not get the sway control, but you can easily add it to this hitch. Engaging the bars can be difficult if you're not on perfectly level ground.



by:

Product itself seems very stoutly built. It can't be easily installed if your trailer jack wheel is on the side of the a-frame, like mine is. The offset bracket kit doesn't help at all in this case. I had to move my jack wheel farther aft to make it work.

The packaging is just way to flimsy for the 81 lb. weight. It came crushed with holes and stuff hanging out. I've seen several other reviews with this same complaint. Fortunately, nothing was lost.

Lynn A.

7/27/2023

Still working well. My complaints were all about shipping and installation issues see original review.



by:

I have been a shadtree machanic all my life, and I recognize quality when I see it. This well made Curt is the confidence builder I needed to feel safe towing heavy loads with a Toyota Tacoma.



by:

I received this item today. It is incomplete!!
The
inside box had to be torn to shit before the out side box was put around it,. REALLY! Someone should have at least checked to make sure all of the parts and readable instructions were present.
At this point my review rationg would be .5. Just glad I wasnt ready to go on a trip.
All items on parts list 7 thru 19 are mising.

Etrailer Expert

Sierra K.

6/30/2022

I am sorry. I know that was irritating. We recently shipped you new hardware and were wondering if you had any comments about the installation of the product?



by:

Arrived early, my wife and I installed this ourselves with basic tools. Instructions were clear and easily followed. Loaded my trailer just like I would for travel. Went from squatting to nice and level.
I purchased longer chains for the bars due to the Somerset having a stacked frame.
I also purchased a transmission cooler. Installed that with no problems



by:

This hitch system has been great for our camper and 2018 Kia Sorento. The only complaint I have is that the finish coat started to peel and have issues in some spots pretty quickly. It did not take much for there to be a ding or nick that caused issues which then produces some rust.

As far as utility though, the hitch works great and meets the need of what I am looking for.



by:

This is my second Curt system and the quality isn’t as good as the first. The loading bar for the snap up bracket is a rough cut, short piece of pipe, without a handle grip. The hinges on the snap bar bind and do not move freely by hand. The chain links were smaller making it hard to keep them on the hook when loading the spring. I took the chains from my old system and put them on the new system. The paint finish is not as durable as the old system. The holes for the safety pins are not exactly aligned. The system works but I was hoping for better quality.



by:

Put this on our 2006 Nissan Frontier to pull our camper. Worked great, and really helped raise the trailer tongue.



by:

Iam sure the hitch will work well if all the parts are there. This is how I received my hitch off the delivery truck. Not good.

Etrailer Expert

Katrina B.

5/16/2022

Oh no! I have sent your information over to our customer service department for them to assist you.



by:

Works well on my f 150 and wolf pup tra iler



by:

The hitch was easy to install and setup properly with the instructions provided. My pickup and the trailer ride level and I’m guaranteed to not drag the tongue jack again.

Mac

5/31/2020

Still great, I’ve used it with my old Dodge Dakota and my newer Toyota Tacoma. I had to make a simple adjustment when I first started towing with the Tacoma but it is all good after the slight adjustment.



by:

Good fit and finish of the weight distribution system. Assembled and installed easily in 1 to 2 hours. Seems to be the perfect fit for my trailer and tow vehicle. Way better value than the $900 system that the RV dealer tried to insist that I needed.

Jerome

6/11/2019

still working great. no issues.



by:

I had the system installed by my trailer personnel--no problems. Fit was perfect and it works great. Highly recommend it.

Thomas

8/12/2022

I sold the trailer and the system.



by:

This order is in limbo for 11 days. I wish to cancel the order. Tracking indicates "delay." I can't wait any longer. Please refund my money. Please check this out!

Etrailer Expert

Jenny N.

6/2/2022

I will have our Customer Service team reach out to you.



by:

This hitch seems very well made and is not difficult to assemble. I’m overall happy with this product except for the chains on the bars isn’t long enough to hook up while using this with a pole tongue adapter.

Etrailer Expert

Mike L.

5/11/2018

The Pole tongue adapter you purchased is designed for trailer frames up to 6 inches tall. If the chains arent long enough, lower the weight distribution head by 1-2 sets of holes and tilt the head more toward the front of the vehicle. This will bring the ends of the spring bars higher, and should allow your existing chains to work.



by:

Would have been five stars, except one of the grease fittings was broken.



by:

Curt products are well made.



by:

Exactly what i needed good instructions. Package was destroyed and the little bag holdins the hardware had busted open , and the shipper did get everything back in the box before tapping everything up. etrailer was right on it and got the missing parts to me asap thank you for that



by:

This hitch system helped us haul our popup 4k highway miles with no stability issues and great load levelling on our Honda minivan. Setup is relatively easy, however it did require some modifications to the trailer tongue. Overall I recommend this device.



by:

So far I have installed the Weight Distribution Hitch, very easy to install it (saved me 200 $), easier if you have a helper, took me about an hour (with a helper) to put it together, instructions very easy to follow.
Solid construction, you will need tools that usually are not in every house (1" wrench)



by:

A big improvement in towing performance for my small truck and small travel trailer. Even without a sway control device, the sway is drastically reduced. Great value for the price.



by:

I installed the hitch today, with the information provided on the etrailer website I was able to get the right one for my application first time around. It turned out just like I wanted. etrailer has name brand products at good prices. I'll be back.



by:

Equalizer bars work great with my Dodge Caravan and our Christian Builders tool trailer.


25
753
Show More Reviews

See what our Experts say about this CURT Weight Distribution Hitch

  • Determining Correct Weight Distribution Hitch For Towing W/ 2005 Toyota Sequoia
    The Curt MV Weight Distribution System - Round Bar - 6,000 lbs GTW, 600 lbs TW # C17050 you were looking at very well may work with your 2005 Toyota Sequoia, but to confirm this you will need to verify the total tongue weight of your setup. Total tongue weight is the tongue weight of your fully loaded and ready to tow trailer plus the weight of any cargo behind the rear axle of your vehicle. The easiest way to get an accurate tongue weight measurement is with a tongue weight scale like...
    view full answer...
  • Where on Trailer A-Frame Would Lift Brackets of Curt C15070 MV Weight Distribution Hitch Install
    When installed so that the chains are perpendicular to the trailer frame, the lift brackets should be installed so they're centered right at 30 inches rearward from the trailer ball when the trailer's hitched up. The lift brackets are 4 inches wide (they take up 4 inches of space on the trailer A-frame), so the leading edge of the bracket would sit at about 28 inches rearward of the ball center and the trailing edge of the bracket would sit at about 32 inches rearward of the trailer ball...
    view full answer...
    Image 1 for
  • Weight Distribution Recommendation for 2015 Chevy Equinox Towing 3,200 lb Trailer
    I have a really great solution for you, but the tongue weight range of the Curt system you mentioned is too small for your trailer with most likely a 320 lb tongue weight. Ideally you pick a system where the loaded tongue weight of your trailer falls right into the middle of the range. So for a similar system that would work well we have the part # RP65509 which has a tongue weight range of 200-600 lbs. The Curt only has a 500-600 lb tongue weight range. This will work great with your...
    view full answer...
  • Solution On How You Can Install A WDS On Trailer With No Space On Trailer Frame
    To be able to properly install the Curt MV Weight Distribution System # C17050 on your Flagstaff 176ED with limited frame space, I recommend installing the: -Chain Hangers for Reese Weight Distribution Systems # RP58305. These brackets provide alternate attachment points for your WDS, and is specifically designed to eliminate any clearance problems by attaching to the side of the trailer tongue instead of the top. I have also included an installation video of # RP58305 for you to check...
    view full answer...
  • Does Chevy Trailblazer Have Higher Towing Capacity When Using Weight Distribution
    Yes, if you were to use a weight distribution system like the part # C17050 you'd get the higher tongue weight capacity you mentioned of 912 lbs instead of 400 lbs like you mentioned.
    view full answer...
  • Weight Distribution System For A 2020 Kia Telluride Towing a 5,000 lb Trailer
    Hello Pete. It sounds like you are on the right track here, because the Curt MV Weight Distribution System # C17050 will definitely be a correct match for your 2020 Kia Telluride and your 5,000 lb trailer. Generally, we look more at the trailer side of things when selecting a weight distribution system. More specifically the loaded tongue weight of the trailer. The Curt # C17050 is recommended for trailers with a tongue weight between 400 and 600 lbs. It sounds like you will be within that...
    view full answer...
  • Is Curt MV Weight Distribution Comparable to Harbor Freight WD System
    The Curt MV weight distribution part # C17057 would be a great example of a weight distribution similar to the one you found in design and in cost but that is a higher quality. My brother actually has the Harbor Freight WD system and while it has so far not failed I wasn't overly impressed with the build quality. This system is rated for 1,000-1,400 lb tongue weight. For lighter MV models we have the part # C17052 which is rated for 800-1,000, the # C17050 which is rated for 500 lbs...
    view full answer...
  • Recommended Weight Distribution System for a 4,700 lbs Trailer
    Weight distribution systems are chosen based off of tongue weight, which is typically 10% - 15% of your trailer's total weight. Your 4,700 lbs trailer would have a tongue weight range of 470 lbs - 705 lbs. With this in mind, I recommend the Fastway e2 Weight Distribution w/ 2-Point Sway Control item # FA94-00-0800. This system has a tongue weight range of 400 lbs - 800 lbs which would great with your trailer. The Fastway e2 item # FA94-00-0800 has built in sway control that will keep...
    view full answer...
  • Weight Distribution System for 2019 Forest River NoBo 19.5 Plus Brake Controller
    The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use. The Fastway e2 part # FA94-00-0600...
    view full answer...
  • Recommended Weight Distribution System for a 4,000 Lb Trailer
    I have two options for you; a system without sway control in the Curt MV Weight Distribution System part # C17050 and a system with sway control in the Husky Center Line Weight Distribution System part # HT32216. These systems are both rated correctly for your 4,000 lbs trailer. I recommend the system with sway control as you will have stability during strong crosswinds or when large trucks pass by. It also comes with a 2-5/16" hitch ball which is what you need as I am not aware of a 2-5/8"...
    view full answer...
  • Can Bars Be Upgraded on Curt MV Weight Distribution to Work With Larger Trailer
    Great question! Your current Curt MV Weight Distribution System # C17050 (rated for up to 600 lbs TW) and the upgraded Curt MV # C17051 (rated for up to 800 lbs TW) use all of the same parts so you can definitely upgrade the weight rating by simply swapping out the bars to the larger part # C17072 - just be sure to pick 2 of these up. With that being said, these bars are rated for a max of 800 lbs TW so if that's what you're anticipating your total tongue weight to be then I recommend...
    view full answer...
  • Best Weight Distribution System for a Keystone Springdale 179RD
    II took a look at the weight capacity for your Honda Ridgeline and the loaded weight of your Keystone Springdale 179RD trailer. The dry weight is your trailer empty with no cargo inside whatsoever. Your trailer will be heavier once you get it loaded up. The Curt MV Weight Distribution System item # C17050 has a tongue weight range of 500 lbs - 600 lbs and will work great for your trailer but you will be limited by your Honda's 5,000 lbs maximum towing capacity. If you choose to add sway...
    view full answer...
  • Recommended Curt MV Weight Distribution System for Trailer with 425 Pound Tongue Weight
    If the loaded tongue weight of your Starcraft Avalon is around 425 pounds I recommend the Curt MV Weight Distribution System # C17050, which features a tongue weight capacity of 500 to 600 pounds. When adding any cargo weight you have stored behind the rear axle of your Silverado this will match up really nicely to your setup's total tongue weight and will work great to level out both your truck and the trailer. The only thing you will need to add is a compatible hitch ball like the 2...
    view full answer...
  • Determining If Weight Distribution Hitch Will Fit Coachmen Clipper Classic 1270ST W/ Side Mount Jack
    It may be possible to use a weight distribution hitch with the side mounted jack on your Coachmen Clipper Classic 1270ST Pop Up Camper, but it will depend where it is located. Based on the pictures of trailers similar to yours that I was able to find it appears your trailer has an A-Frame. If that is the case then installing an A-Frame jack like the # TJA-5000S-B if it has the center jack mounting hole. If your side mount jack is just bolted on and can be moved then moving it as far back...
    view full answer...
  • Price Conscious Weight Distribution Hitch System For 4,000LB Boat Trailer With Straight Pole Tongue
    For the most price-conscious weight distribution system, the Curt MV Weight Distribution System # C17050 can be used with the Reese Pole-Tongue Adapter # RP3280 on your Chaos boat trailer. This will take care of the weight distribution that Ford recommends that you use on your 2019 Ford Explorer. I recommend the Reese Pro Round Bar Weight Distribution w Sway Control # RE34FR as it will give you added stability with the sway control. The sway control helps to reduce any trailer sway that...
    view full answer...
  • Weight Distribution Recommendation for 600 lb for Combined Trailer Tongue and Rear Tow Vehicle Cargo
    Thank you for the information! If your loaded trailer tongue weight (which should be 320 lbs - 480 lbs) plus the weight of cargo in the back of your 2000 Chevy Tahoe is about 600 lbs then the Curt MV Weight Distribution System # C17050 is going to be right in your wheelhouse. None of our weight distribution systems mount 36" back from the center of the hitch ball so you will need to use the Curt Hanger Kit # C17005 to accomplish this. It's also important to note that you'll need a hitch...
    view full answer...
  • Recommended Weight Distribution System for 5000 lb Travel Trailer
    Travel trailers like your Escape are especially susceptible to trailer sway caused by passing or oncoming traffic and cross winds due to their high sides that act like sails on a boat. Because of this, I'd highly recommend using a weight distribution system with an integrated sway control system. This will make towing your travel trailer a much more pleasant experience. The Curt # C17050 you'd looked at is a fine system, but it won't offer any sway control for you plus the system is rated...
    view full answer...
  • Recommended Weight Distribution for 3700 lb Fleetwood Niagara Pop-Up Camper
    With a weight distribution system, you want to choose a system based on the fully loaded and ready to tow tongue weight of the trailer. I'll link you to a help article that explains how to determine your fully loaded tongue weight, but since you've provided the GVWR (thanks for that, by the way!) we can make a pretty darn accurate educated guess. With a GVWR of 3700 lbs, the tongue weight of your pop-up will range from 370 lbs on the low side to as much as 550 lbs. Both the Curt # C17057...
    view full answer...
  • Can 2013 Ford Edge With Factory Trailer Hitch Use Weight Distribution Hitch C17050
    Your Ford dealer was right, as Ford says nothing specific about weight distribution compatibility with the factory hitch on a 2013 Ford Edge. That said, I took a look at Ford's 2013 towing guide, and they list capacities for their hitches both with and without weight distribution, and the Edge's capacity for WITH weight distribution was blank, and the only reason I can think why that would be is if it isn't compatible with weight distribution. So while I can't say with absolute, 100 percent,...
    view full answer...
  • Alternate Shank for Weight Distribution System to Keep Trailer Level
    The Curt weight distribution (WD) system # C17050 does include a shank which installs in your hitch receiver and suspends the system's head assembly. It is possible to select a WD system that does NOT include a shank, which allows you to choose one with the appropriate rise or drop to keep your hitched trailer level. Or you can simply choose a second shank from the linked page, such as Curt shank # C17124, which offers up to 10-inches of drop. The linked page displays all WD systems that...
    view full answer...
  • Recommended 2 Inch Weight Distribution Shank w/ a 10 Inch Rise
    Yes, they are and you can use other manufacturers. To get a 10" rise you will want the Fastway e2 Weight Distribution Shank item # FA92-02-4214. This shank is compatible with the Curt MV Weight Distribution System item # C17050 you were looking at.
    view full answer...
  • Weight Distribution Recommendation for Toyota Tundra Towing Trailer with 550 lb Tongue Weight
    The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use. For a tongue weight of 550 to 600...
    view full answer...
  • Recommended Weight Distribution System for 2018 Coleman 2305QB Travel Trailer
    When looking for a properly rated weight distribution system, the most important factor to consider is the total tongue weight of your setup. This will include both the loaded tongue weight of your trailer (as if ready for a trip), along with any added cargo weight behind the rear axle of your Silverado. Ideally, this number will fall somewhere near the middle of the operating range for the system you choose. Most likely, the 501 tongue weight that you referenced in your question is referencing...
    view full answer...
  • Can You Reverse with the 6K Curt MV Weight Distribution System
    The Curt MV Weight Distribution System part # C17050 does not have sway control so reversing is not as big of an issue although the trailer still needs to remain relative straight. If you need to turn and backup it is recommend to unhook the spring bars.
    view full answer...


< Previous



Do you have a question about this Weight Distribution Hitch?


Used Items Available
Used Picture for Curt MV Weight Distribution System - Round Bar - 6,000 lbs GTW, 600 lbs TW
Used Picture for Curt MV Weight Distribution System - Round Bar - 6,000 lbs GTW, 600 lbs TW
Used Picture for Curt MV Weight Distribution System - Round Bar - 6,000 lbs GTW, 600 lbs TW
Used Picture for Curt MV Weight Distribution System - Round Bar - 6,000 lbs GTW, 600 lbs TW

Condition: Surface Scratches

Notes: whole kit has scratches on it, missing a couple washers and a cotter pin

Our Price: $355.40
Add to Cart
Secure Checkout

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Lindsey S
Edited by:
Lindsey S
Employee Kathleen M
Updated by:
Kathleen M
Employee Wilson B
Updated by:
Wilson B
Employee Amanda M
Updated by:
Amanda M
Employee Mike S
Updated by:
Mike S
Employee Isabelle B
Updated by:
Isabelle B
Employee Dustin K
Video Edited:
Dustin K
Employee Cole B
Installed by:
Cole B
Employee Michael B
Installed by:
Michael B
Employee Chelsea B
Written by:
Chelsea B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.