Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver
(235 reviews)
Price: $82.10
In Stock
Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver
Item # HT02
Retail:$124.93
Our Price: $82.10
You Save: 34%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (235)
- Q & A (0)
- Videos (2)
- Photos
Brophy Hitch Adapters - HT02
- Hitch Reducer
- Fits 2 Inch Hitch
- No Extension
- 2 Inch to 1-1/4 Inch
- Brophy
- Bike Racks
- Cargo Carriers
- Hitch Mounted Accessories
Simple design transforms your 2" receiver into a 1-1/4". This lets you use all your 1-1/4" hitch accessories, such as bike racks, cargo carriers, or ballmounts with a 2" hitch. Just pin it, clip it, and go!!!
Features:
- Easily convert a 2" receiver to 1-1/4"
- Sleeve design does not reduce tongue weight capacity
- Powder coated black finish
- Conveniently includes 1/2" pin and clip to hold 1-1/4" accessories in place
- 5/8" Hitch pin and clip for 2" receiver is sold separately
Specs:
- Maximum towing capacity: 3,000 lbs
- Maximum tongue weight: 300 lbs
- Length:
- Center of hitch pin hole to center of hitch pin hole: 3"
- Overall: 7"
HT02 Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver
Video of Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Brophy Hitch Reducer Trailer Hitch Receiver Review
Today I will be taking a quick look at the Brophy Hitch Reducer from a two inch to an inch and a quarter. This is part number HT02. We'll go ahead and show you how it performs. Here at the back of our ATV, our ATV does have a two inch hitch, which is installed on the back of our chassis. The adapter sleeve is going to work really well, because it allows us to install and inch and a quarter accessory onto our ATV. You can see that it has two pinholes here in the sleeve and that's going to allow us to actually slide it into the shank of our two inch hitch. Our hitch reducer does come with a half inch hitch pin, which is going to be used to install the sleeve to our two inch hitch. This is a great way to install an inch and a quarter accessory.
For example, if you have a two inch receiver installed on your ATV, but you have other inch and a quarter accessories, this little adapter sleeve is a great way to just slide it into your hitch instead of having to switch out receivers. You can see it is coated in a black powder coat finish that is going to help resist rust and corrosion. Now we have this other pin which is a standard 5/8 inch pin and clip that are sold separately. That's going to install your two inch accessories. For example, there is one pin that does come with this and that pin is usually designed to secure the sleeve to the receiver so that you will need an anti-rattle device or some sort of hitch pin and clip to secure your accessory. Now you can see that we have our inch and a quarter accessory, we're going to slide the shank into the tapered end of our sleeve. Now you can see that it's going to have a smaller diameter on one side of the sleeve and it's going to have a regular two inch diameter on the other side.
We'll slide this in and basically just line up the hitch pin hole with our accessory and the hitch pin hole with our adapter sleeve. Now that we have our accessory installed, we'll go ahead and show you how it performs. Now to complete today's review of the Brophy Hitch Reducer from a two inch hitch to an inch and a quarter, part number HT02. .
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver - HT02
Average Customer Rating: 4.6 out of 5 stars (235 Customer Reviews)
Simple design transforms your 2" receiver into a 1-1/4". This lets you use all your 1-1/4" hitch accessories, such as bike racks, cargo carriers, or ballmounts with a 2" hitch. Just pin it, clip it, and go!!!by: Sarah08/07/2023
This has worked great to reduce my 2" hitch so that I can continue to use my 1 1/4" Thule bike rack, and I like that it doesn't extend out much from the hitch. After my last trip though, the inset separated from the larger piece. I can still use it, but without the smaller piece fixed in place, I can't put it on the car first and then slide the bike rack into it since the smaller piece slides, and it's impossible to line the holes up. It's also rusted more than I expected. It wasn't inexpensive, and I was hoping it would last longer. I've used it for maybe a dozen trips.
by: Matthew11/13/2022
Perfect fit BUT the inner tube broke away from the outer tube after about a dozen trips. One small weld on the outside corner is all that holds it on. The small amount of play must have been too much for it. I was even using an anti-rattle lock pin. Very disappointing due to the price point. And now it’s unsafe to use as it could slip right out of the receiver.
Jenny N.
12/5/2022
I did reach out the manufacturer. They advised that the inner tube is typically a tight fit and that the tack weld is there just to help hold it in place and that the inner tube does not serve any structural value. Once the pin is in place it holds it all in as well.
by: Dixie03/22/2024
Rochelle was great! She was very helpful in my decision to purchase the extension for my bike rack. Also, she was professional and friendly.
by: Michael04/10/2024
tight fit, does not slide on and off ea sily
by: Gerardo08/20/2020
Fits perfectly, added the Silent Hitch Pin and it’s awesome. Would recommend it because etrailer has been fantastic. One happy customer here.
by: Joe G.05/30/2011
It did what is was supposed to, reduce from a 2" to 1 1/4", it work but it is a little loose, bike carrier moves around a lot.
by: Eric02/27/2023
Works well to mount a 1-1/4" bike rack in a 2" receiver. I don't see excessive wobble.
by: Melanie 02/24/2023
Having spoken with a knowledgeable E-Trailer representative, I was glad she knew what I was trying to describe and needed to connect a cargo basket that has a smaller hitch to my larger camper hitch. Looking at the item as we spoke on the phone, I must admit I couldn't see how it was going to work. I received the Hitch Reducer in the mail just two days later. And sure enough, looks can be deceiving, it Does work ! Thank you Paula S at E-Trailer for your professional listening and expert knowledge of what I needed and delivery of exactly that ! Sincerely, Melanie D.
by: Neil05/26/2023
It works very well. Keeps the hitch secure and tight, no rattles whatsoever.
by: TW10/12/2023
Fits tight, very secure, compact size. Works perfect
by: Dennis J09/19/2016
I bought this to use a cargo rack that was given to me on my 2013 Murano. My hitch is 2" and the cargo carrier is 1 1/4". This made the transition perfectly. The best part is it's not so long like any of the others that I've found. This being only 7" long, my cargo rack does not stick out so far like it would with a 12" adapter. Fast shipping, great communication from etrailer.
Dennis J.
9/19/2017
After a year, this is still working perfect. Thanks.
by: Craig G. 06/15/2017
The hitch adjuster is solidly constructed and fits easily into my two inch hitch, though it seems a little loose. Some play is, however, probably necessary for normal use. My 1 1/4" bike rack fits well into the internal dimension. I plan to use tie downs to steady the bike rack and minimize side-to-side wobble. Not sure if the dimensions on outer and inner fit could be enlarged just a bit to improve wobble without causing difficulty with assembly and removal. I may be able to add something more about this once I have worked with it under driving conditions. Overall, the product is just what I expected it to be.
Craig G.
6/15/2018
The adapter has worked just as needed to reduce my regular hitch so it accepts the smaller arm of my bike carrier.
by: Christian01/11/2022
The weld failed on the reducer sleeve insert and has come loose. Sent it back for RMA, but the replacement had the same problem.
My load was within limit (Thule T2 Pro 1-1/4" rack + 2 bikes).
I gave up on it and just bought a new 2" rack.
Jenny N.
1/11/2022
I will have our customer service team reach out to you. When you use a reducer or extender it will move the pivot point of the accessory further away from the vehicle which can place more stress on the hitch receiver. When using this reducer it does reduce the tongue weight of the hitch to 300 pounds. You will want to use a anti rattle device with the reducer like part # 63232 to reduce movement. You can also use a stabilizing strap like part # 18050 with the bike rack to the vehicle.
by: TOR09/04/2019
Hitch is very well built and works well. Required a step-down to fit Audi hitch and customer service provided outstanding advice and service. Professional. Very, very happy with product, transaction and service.
Tor
9/7/2020
Works and looks great one year later. Excellent product excellent company.
by: Charles08/08/2022
This is a well made adapter except for one problem I encountered when attaching a Yakima bike rack with 1 1/4" stinger. The front end of the stinger hits the adapter pin, and does not allow the holes to line up in order to insert the bike rack's pin. The stinger simply cannot slide in far enough for the holes to match up. I had to drill a new hole closer to the outer end of the adapter. I have encountered the same problem with other adapters. etrailer, take notice--if you solve this problem, you'll have new customers buying your adapter, which is otherwise well made.
by: David T11/08/2022
Works like it should with my Thule T2 1.25” bike rack. No problems. Saves me from buying a new $800+ rack. Along with the Anti rattle pin #63232, works like a charm.
by: Martin F.09/21/2020
Perfect hitch reducer and Anti-Rattle Hitch Lock combination to carry our two bikes around for the last year on our 2020 Rav4 Hybrid! Great value.
Martin F.
9/22/2021
Still going strong, no rattle and good combination!
by: Robert 07/20/2023
Well made. Exact dimensions. No issues.
by: Rick S.04/12/2019
I purchased a hitch to mount my hitch mount bike rack. I fully intended to purchase the Class II, 1.25" hitch, but after speaking with the e-trailer rep it made more sense to go with the Class III hitch and use a reducer for the bike rack. It gives me more flexibility with my hitch. Thanks e-trailer guys for asking the right questions and making sure I had the correct product for my needs.
by: George L07/22/2019
The service from etrailer is exceptional!
I needed this adapter for our 5th Wheel RV. We have a bike rack and the 2” receiver hitch needed to be 1.25 for the bike rack. The original was adapted with a rubber reducer but it wobbled way to much. So the fix was a adapter sleeve. I was pleased to find on on etrailer. However, the price was high. I bought it anyway and then still had to shim the bike rack and the adapter to make a tight fit. It works however for the 60+ $ I paid it should have fit the receiver better and the bike rack better.
by: Don P.11/12/2013
I can't say enough good things about the C.S. Brophy company and how they stand behind their products. I bought one of these adapters from etrailer and used it for months but it didn't fit right. I finally discovered the 5/8" hole on one side was off center. etrailer directed me to call Brophy, and Brophy replaced the item as quickly as could be expected, paid for the return shipping, and followed up to make sure the replacement worked correctly. The replacement is a well made piece of hardware that should last many years. I will look first for Brophy products whenever I'm shopping for trailer hardware.
by: Benson02/24/2023
A bit pricey...but ordering was a breeze and the item was shipped almost immediately. I've had good luck ordering from etrailer, and this time was no exception.
by: Joseph04/17/2018
I bought this to use with a Thule T2 Classic, which has a 1" hitch to fit my 2" receiver on our truck. This reducer works very well for this application. The T2 though uses a metric M12 threaded bolt to attach. You will need a longer bolt and lock washers to accommodate the now wider span with the addition of the reducer. There is very little wobble with the T2 attached, but there is some. They make bolts that can be attached to eliminate the wobble.
by: mike o07/01/2013
Bought this hitch reducer for my chevy Traverse to use my 1 1/4" Thule bike rack.
Fits the car fine. The spare tire is immediately behind and inline with the trailer hitch. This does not extend beyond the 2" hitch toward the spare tire. My Thule bike rack now fits nicely into the trailer hitch. I use a regular pin to hold the reducer in the hitch. With the bikes attached the reducer "moves" inside the 2" hitch about a 1/16th of an inch. this translates to a full inch or 2 of movement of the bikes back and forth. The Thule 1 1/4" hitch bar has a threaded bolt to secure it to the Hitch/reducer. In a smaller hitch there is no play and the bouncing of the bikes. with the reducer it now takes some getting used to. I am contemplating a steel shim but I would need to make sure it cannot fall out during travel . . .
by: Jim08/21/2014
I needed a hitch reducer to attach my bike rack to our vehicle for my family's upcoming vacation trip. My bike rack had a 1 1/4" hitch and my vehicle has a 2" receiver.
I quickly found the right hitch reducer on the etrailer.com website and the product was delivered in-time for my trip and worked as expected.
We did plenty of biking.Thank you etrailer.com
25
235
Show More Reviews
See what our Experts say about this Brophy Hitch Adapters
- 2 Inch Trailer Hitch Reducer to Use Bike Rack With 1-1/4 Inch ShankThere is one option for a hitch reducer for a 2 inch hitch that will allow you to use a bike rack with a 1-1/4 inch shank, which is from Brophy: - Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver # HT02 This will stick out approximately 3 to 4 inches from the Curt hitch that fits your 2021 Acura RDX, the Curt Trailer Hitch Receiver # C95CR. In regards to the 1-1/4" Draw-Tite Trailer Hitch Receiver # 36114, it will fit a 2021 Acura RDX with a spare tire, but if the spare tire has a wheel...
view full answer... - Best Way To Carry a 2 Inch Bike Rack With a 1-1/4 Inch HitchAs the 1-1/4" sleeve inside the Brophy Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver # HT02 is not removeable, it will not work as an expander. However, I do have another option available for you. With the 1-1/4" hitches for the 2016 VW Passat being Class I rated, I suggest going with the Brophy Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver # HTAD. This will definitely fit your hitch and will allow you to carry your bike rack without issues. However, it should be noted that any...
view full answer... - Easiest Way to Convert Thule T2 Bike Rack from 1-1/4 inch Hitch Size to 2 inch Hitch SizeThe 2 inch Thule hitch adapter # 853-7292 does not fit every bike rack they make unfortunately and it does not fit any version of the Thule T2 bike racks. Since you don't want to replace the shank (understandable) the best work around is the hitch reducer sleeve part # HT02.
view full answer... - Can the Thule T2 Pro Bike Rack be Used in a 1-1/4 Inch and 2 Inch Trailer HitchWhat you can do is use a reducer sleeve # HT02 in order to use the T2 Pro bike rack # TH23JV in a 2 inch trailer hitch receiver. This way you will be able to use the bike rack in both a 1-1/4 inch hitch and a 2 inch hitch.
view full answer... - How to Use Rola Convoy with 1-1/4 Shank on 2012 Jeep Liberty with 2 ReceiverThere is not a specific adapter for the Rola Convoy 9307 to adapt to a 2" receiver but you can use a hitch reducer sleeve like the Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver # HT02 to make the 2" hitch on your 2012 Jeep Liberty into a 1-1/4" receiver. I prefer this to an extension type adapter because it uses the existing receiver and does not extend away from the cross tube significantly, so it won't reduce your tongue weight by 50% like the # C45770 would.
view full answer... - 2" Hitch Adapter for Thule Hitching Post 945My solution for this is to approach it from another angle and REDUCE your hitch size, since the sleeve adapters that increase the hitch of this specific model, the Thule Hitching Post 945, are no longer widely available. I recommend the Hitch Reducer 2" to 1-1/4" # HT02 as a workaround for you. I attached a video showing how to install and use the reducer. This works with standard hitch pins bolts or a threaded hitch pins which it looks like you have on your rack.
view full answer... - Shortest 2 Trailer Hitch Extender AvailableThe 7" Hitch Extender # HE06 is going to be our shortest 2" extender available due to the length of shank required to extend our of the receiver for the additional receiver tube. The only way to get a 3" is with a reducer like the Hitch Reducer 2" to 1-1/4" # HT02. Since the smaller shank can fit inside the 2" receiver this is only 3" long from 2" hitch pin hole to 1-1/4" hitch pin hole.
view full answer... - What Is The Best Way To Carry A Bike On Two Vehicles, One With 1-1/4 Trailer Hitch, The Other 2I recommend getting the 1-1/4" version of the Yakima OnRamp, part # Y96FR. You can use a hitch reducer, part # HT02, with this setup. It will not reduce the maximum tongue weight of your trailer hitch when you are carrying this hitch bike rack on your pickup truck. You will be able carry the Yakima OnRamp Bike Rack for 2 Electric Bikes on your 2019 Hyundai Sonata without any issues. I have included a product description link and video review links below.
view full answer... - How To Use 1-1/4 Inch Bike Rack with Curt Hitch for a 2019 Toyota RAV4The Curt Trailer Hitch Receiver part # C13416 which is a fit for a 2019 Toyota RAV4 does not come with a 1-1/4" to 2" receiver tube adapter but one can be obtained with the Brophy Hitch Reducer Sleeve part # HT02. Please note, none of our Trailer Hitch Receivers come with a 1-1/4" to 2" receiver tube adapter. The only other option would be to use the Draw-Tite Trailer Hitch Receiver part # 36675 which has a 1-1/4" receiver tube but I recommend the Curt Trailer Hitch Receiver with 2" receiver...
view full answer... - Size of Trailer Hitch Receiver Available for 2020 Lexus RX 450hI checked with the hitch manufacturers for you, and the only size of hitch receiver available for a 2020 Lexus RX 450h is a hitch with a 2 inch receiver, and the best option for a hitch for your Lexus is the Curt Trailer Hitch Receiver # C13282. If you are looking for a 1-1/4 inch receiver because you have an accessory with a 1-1/4 inch shank, I recommend using the Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver # HT02.
view full answer... - Recommended Hitch Reducer for a Yakima StickUp Bike Rack Being Used With A 2" Receiver No, the Yakima StickUp you have does not have any replacement shanks like the Replacement 2" Hitch Shank for Yakima HoldUp Bike Racks # 8880580 to convert your rack to a 2" shank. Your only options are to either replace the entire rack with a different one with a 2" shank, or use a reducer # HT02.
view full answer... - Recommended Trailer Hitch For 2020 Honda CR-V That Is Compatible With Hands Free Lift Gate SensorI do have an option for you, but all of the 1-1/4" receivers for your 2020 Honda CR-V Hybrid all require the hands free lift sensor relocation kit from your local Honda dealer to be able to retain the use of your sensor. If you are dead set on the 1-1/4" receiver I recommend going with the Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # C12169 and the relocation kit . The option I personally recommend is the etrailer Trailer Hitch Receiver # e98848 which does not require...
view full answer... - Anti Rattle Device Recommendation for a Bike Rack Using the Brophy Hitch Reducer part # HT02The recommended anti-rattle hitch pin for the Brophy Hitch Reducer part # HT02 is the Pro Series anti-rattle Pin with Clip, item # 63232. As long as your bike rack has a hollow shank these two parts would work well together and there wouldn't be any movement of the rack in the hitch.
view full answer... - How To Select The Correct Hitch Receiver AdapterI contacted Thule and they informed me that # 515-0109 is not a part number nor could they tell me which bike rack that number corresponds to. If you could send me a picture of your bike rack, I may be able to offer an exact recommendation. In order to use a 2" shank on a Class I/II 1-1/4" trailer hitch receiver, you will want to use the Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver part # HTAD. To lock the receiver to the hitch, you will also need to use the Trailer Hitch Receiver...
view full answer... - 2" to 1-1/4" Receiver Adapter for a Thule 985 Bike RackI have a solution for you. The newer Thule adapters will not work on your older Hitching Post, so you will need a universal adapter. I recommend the Brophy Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver, part # HT02. It's a sleeve that fits into your 2" receiver and allows you to use 1-1/4" accessories. I've linked to a video review of this reducer below. Keep in mind that this has a maximum tongue weight capacity of 300 pounds. So, if that's lower than your current hitch's capacity,...
view full answer... - Replacement 2 inch Hitch Adapters for Swagman XP Bike Rack and Curt Cargo CarrierThe only way we offer the 2 inch adapter for your Swagman XP # S64960 is with the replacement shank part # P315. Since Curt does not have replacements available for their shank adapters you'd need a sleeve adapter like the part # HT02 and you'd be set.
view full answer... - Trailer Hitch Reducer Adapter For 2 Inch Hitch to Carry 1-1/4 Inch Bike RackAll you need in order to use your 1-1/4" bike rack with a 2" hitch is an adapter: - Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver # HT02 You will simply insert the # HT02 into your 2" hitch and it gives you what amounts to a 1-1/4" receiver so you can carry your bike rack. You can secure the reducer to your hitch with Anti-Rattle Trailer Hitch Receiver Lock# 63232.
view full answer... - Anti-Rattle Hitch Lock and 2" Hitch Adapter for Curt 4 Bike Rack Sounds like you have the Curt 4 Bike Rack # C18030 on your 2015 Toyota Sienna. First, for the anti-rattle lock, if you want to replace just the bolt, the official Curt part is # C22321 which has a nice bracket for extra sturdiness. If you're looking for a locking option, then the SportRack Anti-Rattle Hitch Lock # SR0901 is a confirmed fit for Curt bike racks. As for replacing the shank on your Curt 4 Bike Rack # C18030 to make it a pure 2" bike rack, Curt does not offer that part. If...
view full answer... - Recommended Bike Rack for E-Bike with Fenders and Bike with Carbon Fiber FrameThat combination is a difficult one. You could look at the Thule T2 Pro XTR # TH83JV or the Inno Tire Hold # INH120. These are two different types of "tire-hold" carriers, but they both say "may interfere with front fenders. Is it an option to remove the front fender? You could check out the video and see if you think it could work for your bike with a fender. They both offer a 60 pound per bike weight limit and work with your 2 " hitch. The second option that I have seen work...
view full answer... - Hitch Reducer for a 2021 Volkswagen ID 4 Curt HitchYou don't need an adapter to go down in size you need a reducer. A reducer also allows you to keep more of your tongue weight capacity at 300 lbs on your 2021 Volkswagen ID 4 and your Curt Trailer Hitch Receiver item # C47JR. I recommend the Brophy Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver item # HT02. This will take your 2" class III receiver down to a 1 1/4" to accommodate the class I and II bike racks without losing half the capacity of your class III like you would with an adapter.
view full answer... - Recommeded Hitch Reducer For 2I recommend the Brophy Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver # HT02. This adapter has a simple universal design that will fit your bike rack.
view full answer... - Adapting a 1-1/4 Inch Hitch on a 2008 Ford Edge to use a 2 Inch Bike RackYou can use this 1 1/4 inch to 2 inch adapter, part # 80303. However, use of this adapter will LOWER the tongue weight capacity (should be listed on a sticker that is on your hitch) by 50 percent. This means that the bikes you want to carry and the carrier itself cannot weigh more than half of the listed tongue weight for your trailer hitch. Exceeding this capacity could result in damage to your hitch and loss of the rack and the bicycles.
view full answer... - Using a Curt Cargo Carrier with 1-1/4 Inch Shank in a 2 Inch Trailer Hitch ReceiverAll you will need is a reducer sleeve # HT02 to use Curt cargo carrier # C18110 in a 2 inch hitch. You can leave it pinned to the carrier shank all the time so you won't have to put in and remove an adapter all the time. Also the use of a reducer sleeve (as opposed to an adapter that sticks out) will not reduce the tongue weight capacity of the hitch. A 2 inch shank is not available by itself for this cargo carrier.
view full answer... - Using the Thule T2 TH9045 on a 2 Inch ReceiverThe Thule T2 you mention, part # TH9045 is compatible with the 1-1/4 inch receiver only. Thule does not offer an adapter that is compatible with the T2, like with other of their racks. In order to use the T2 on a 2 inch receiver, a Hitch Reducer sleeve, like part # HTO2 would be your best option. The locking hitch pin included with the T2 will work with the reducer, but an additional hitch pin like part # PC3 or lock like part # e98882 will be needed to retain the reducer into the 2 inch...
view full answer...
Do you have a question about this Hitch Adapter?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Lori W
Expert Research:
Jeffrey L
Installed by:
Matthew K
Installed by:
Brandon M
Installed by:
Cole B
Video by:
Alan C
Video Edited:
Chad S
Updated by:
Wilson B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
11/21/2022
It is unusual to hear about this happening with the reducer. I would like to ask if you could send a picture of the reducer. I want to reach out to the manufacturer about it.