Installation of Draw-Tite Class III 2-Inch Hitch # 75684 On 2010 Hyundai Santa Fe
Question:
On my 2010 santa fe the muffler over extends the mounting bolt holes in the frame. What wrench is recommened to tighten mounting bolts?
asked by: Wendy
Expert Reply:
When installing the Draw-Tite Class III 2-Inch hitch, part # 75684 on the 2010 Hyundai Santa Fe, the mounting bracket bolts are above the muffler on the passenger side of the vehicle. The bolts are M10 x 1.25 and can be tightened with a torque wrench to the recommended torque settings listed in the instructions.
If the bolts are hard to access you might try using a swivel head ratchet or wrench that will let you access the bolts. Also, in some hitch installations the removal of a rear exhaust hanger might let the muffler down enough to gain access to the bolts.
If you do not have access to a wide selection of tools I would recommend for you to get the bolts as tight as possible and then stop by a local auto shop and ask them if they can torque the bolts for you.
I am including links to the installation instructions on the Draw-Tite, as well as a helpful installation video for you to check out.
![Jeff D](https://images.etrailer.com/static/images/catg/people/338_tn.jpg)
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class IV
- 350 lbs TW
- 3500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Replacement Hubs and Brake Assemblies for Dexter Mobile Home Axle and 8-147 Hubs
- Q&A: Distance Between the Mounting Holes on the Curt 5-Postion Adjustable Channel Bracket
- Q&A: Replacement for Gabriel Shock Model 610712
- Article: How to Measure a Trailer Axle
- Q&A: Replacement for Parallex 500 Series Model 555 Converter
- Q&A: Recommended Replacement For A JVR9000R RV Stereo System With Three Cameras
- Q&A: Taillight Converter Needed To Separate Brake Lamp and Turn Signal Circuits
- Q&A: Option to Replace Jensen JRV9000R
- Article: Trailer Wiring Diagrams
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Roadmaster Vehicle Specific Base Plates
- Article: How to Measure for Trailer Hitch Drop
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Hitch Receiver Sizes