Trailer Hitch Recommendation for a 2011 Kia Sorento
Question:
What would the Factory Tow Prep Package be for a 2011 Kia Sorrento? How do I know if I have one or need one? I have a 2011 Kia Sorrento EX V6
asked by: Nina
Expert Reply:
The easiest way to know for certain whether a vehicle has the tow package or not is to check with a Kia dealer with your VIN. With that info they will know all of the options your vehicle was built with. Typically the tow package will include a trailer hitch at the rear of the vehicle and a trailer wiring harness like a 4-way or a 7-way.
It looks like you are looking for a trailer hitch for your 2011 Kia Sorento EX. The good news is that the Draw Tite hitch part # 75684 would be the correct hitch to use regardless of whether or not you have the tow package.
I attached a review video for you to check out as well.
For trailer wiring you would want the Tow Ready Harness part # 118506.
If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.
If the ball mount kit does not include a ball mount with the right rise or drop to tow the trailer level, check out the link I have included that explains how to measure to choose a ball mount to tow the trailer level.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class IV
- 350 lbs TW
- 3500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Replacement for Gabriel Shock Model 610712
- Article: How to Measure a Trailer Axle
- Q&A: Recommended Replacement For A JVR9000R RV Stereo System With Three Cameras
- Q&A: Taillight Converter Needed To Separate Brake Lamp and Turn Signal Circuits
- Q&A: Option to Replace Jensen JRV9000R
- Q&A: How To Convert A Wishbone Trailer Wiring Harness To A Regular 4-Flat Trailer Wiring Harness
- Q&A: 40' Wishbone Trailer Wiring With A Ground Wire Running Down Both Sides
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Wiring Diagrams
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: Finding the Serial Number on a Roadmaster Sterling Tow Bar to Use Adapter for Blue Ox base Plates
- Article: Roadmaster Vehicle Specific Base Plates
- Article: How to Measure for Trailer Hitch Drop
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)