Roadmaster High-Low Adapter for Tow Bars Review rm-070 Video

I would discourage the use of an adapter for use of 2 inch accessories in 1-1/4 inch trailer hitch receivers. The reason is that the adapter places the carrier farther away from the rear of the vehicle and hitch, creating additional torque that…

With the large collar on the end of your receiver for your Subaru Ascent it does not appear you will be able to use the Blue Ox Hitch Receiver Immobilizer II #BX88224. Instead you can use the Gen-Y Iron Grip Anti-Rattle Hitch Pin #GY39FR with the…

The part #910021-00 is a Roadmaster crossbar so for a Roadmaster base plate kit confirmed to fit your 2015 Fiat 500 you'd want the part #522013-1A and you'd be set.

Yes, if you had a Roadmaster base plate kit installed on your 2013 Fiat 500 like the part #522013-1A the replacement crossbar part #910021-00 would work with it. But you'd also need a tow bar that this crossbar would have originally came…

You will need an adapter part #RM-032 to use the Blue Ox Tow Bar part #BX4330 with the Roadmaster Base Plate kit part #522013-1A.

I have exactly what you are needing for your 2013 Mini Cooper towing setup. Starting off with the tow bar; Blue Ox has their Alpha tow bar #BX7380 which is what I recommend using. It is very easy to maneuver and it comes with the safety cables for…

It is very normal for the 12V charge line on a vehicle to provide only the voltage that is being provided by the alternator that is not being used by the vehicle itself. The 3.5 volts is not normal but just 3.5 amps would be normal when the vehicle…

We can't recommend you drill into the base plate to mount the breakaway switch as that would void the warranty of the base plate kit. Instead I would recommend mounting the switch to the bumper of the vehicle.

The best way to find a screen for your Atwood Furnace Vent 30578 is to measure the opening. Atwood is no longer in business so exact replacement parts are not always available. The two best options we have for you are the Valterra Bug Screen part…

Since you have the Atwood AFMD35 furnace the correct screen you'd need is the #A10-1305VP.

The ground wire on a trailer's wiring harness (usually a white wire) should be firmly attached to clean bare metal on the trailer frame. The white ground wire on the vehicle's wiring harness should similarly be attached to clean bare…

As with the installation of lights on a trailer, the lights must be grounded, either through the mounting hardware which is the case for many lights. As with trailer wiring the #RM-155 needs the bulbs to be grounded to the vehicle to complete the…