MaxxTow Trailer Hitch Receiver Adapter Review Video

Curt recommends the use of 250 ft/lbs of torque when tightening the nuts of their hitch balls with a 1 inch diameter shank like the part #C40034 that you referenced. The general rule is for a 3/4" shank tighten to 150 ft/lbs For a 1" shank…

The smaller side of the Tow Ready #80300 reducer extends 1-3/8" inside of the bigger side and is then welded on all four sides. This is a heavy-duty item! If you care to know, that leaves 5-5/8" on the big side open. I have attached a link…

I was able to confirm with Draw-Tite that they do have a trailer hitch receiver which is a confirmed fit for your 2019 Subaru Crosstrek hybrid, which is the following hitch: - Draw-Tite Max-Frame Trailer Hitch Receiver #36644

We haven't had any ground clearance issues with any of the trailer hitches we offer for your 2018 Subaru Impreza including the Draw Tite part #36644 that you mentioned. When we installed the 2 inch hitch part #76209 on a 2018 Impreza like yours…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

I checked with Draw-Tite and can confirm for you that the Draw-Tite Trailer Hitch #36644 you asked about will fit your 2019 Subaru Crosstrek hybrid. I attached an install video for this for you to check out as well.

Installing a wiring harness, like the Tekonsha T-One Vehicle Wiring Harness #118467, on your 2020 Subaru Crosstrek will require access/removal of a few panels in the rear cargo area. I included an install video for you to check out that will…

The Draw-Tite Class II #36644 hitch fits the 2018 - 2021 Subaru Crosstrek and the 2018 - 2021 Subaru Impreza 5-Door Wagon with Single Exhaust.

My contact at Curt Manufacturing confirmed that their front-mount 2-inch hitch #C31015 will indeed fit your 2012 Ram 2500 4 X 4 diesel with automatic transmission. He also confirmed it is compatible with the OEM winch. This hitch installs with…

The Thule T2 Pro 2 Bike Platform Rack referenced in your question is a great platform rack designed for Class I and Class II trailer hitch receivers. Since the release of the T2 Pro 2 Bike Platform Rack, Thule has made some improvements and released…

I have included a picture for you with some of the dimensions for the Curt Trailer Hitch Receiver #C11158. From the top of the frame bracket to the top of the cross tube is 1-3/8"(blue). The cross tube is 1-1/2" outside dimension square…

Curt recommends the stabilizer strap with non-supported loads like bike racks to help support the hitch when going over bumps to prevent some of the vertical shock from being transferred to the hitch. Curt does this as a precaution, it's not that…