What Vehicles Does Draw-Tite 36644 Class II Hitch Fit

Question

Question:

I replaced a Draw-Tite Trailer Hitch Class II - 1-1/4 Item # 36644 for my 2021 Subaru Crosstrek with a 2 receiver from you. Can you tell me what other models and years the 1 1/4 hitch will fit so I can sell it.

asked by: Mark V

1

Helpful Expert Reply:

The Draw-Tite Class II # 36644 hitch fits the 2018 - 2021 Subaru Crosstrek and the 2018 - 2021 Subaru Impreza 5-Door Wagon with Single Exhaust.

expert reply by: Mike L

1

Answer 1

Installing a wiring harness, like the Tekonsha T-One Vehicle Wiring Harness #118467, on your 2020 Subaru Crosstrek will require access/removal of a few panels in the rear cargo area. I included an install video for you to check out that will…

view full answer...

Answer 2

I was able to confirm with Draw-Tite that they do have a trailer hitch receiver which is a confirmed fit for your 2019 Subaru Crosstrek hybrid, which is the following hitch: - Draw-Tite Max-Frame Trailer Hitch Receiver #36644

view full answer...

Answer 3

I checked with Draw-Tite and can confirm for you that the Draw-Tite Trailer Hitch #36644 you asked about will fit your 2019 Subaru Crosstrek hybrid. I attached an install video for this for you to check out as well.

view full answer...

Answer 4

We haven't had any ground clearance issues with any of the trailer hitches we offer for your 2018 Subaru Impreza including the Draw Tite part #36644 that you mentioned. When we installed the 2 inch hitch part #76209 on a 2018 Impreza like yours…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 11

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

What Vehicles Does Draw-Tite 36644 Class II Hitch Fit

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching