Dimensions for Curt Trailer Hitch Receiver for 2013 Ford Focus

Question

Question:

I have a special case scenario for my car. I have a lot of upgrades and modifications around the area that this hitch would attach. Would it be to much to ask for dimensions or a drawing of the the #C11158 so I can insure it will fit before I order it? Thanks

asked by: Samuel R

1

Helpful Expert Reply:

I have included a picture for you with some of the dimensions for the Curt Trailer Hitch Receiver # C11158.

From the top of the frame bracket to the top of the cross tube is 1-3/8"(blue).

The cross tube is 1-1/2" outside dimension square tubing(red).

From the bottom of the cross tube to the top of the receiver opening is 2"(green).

Please let me know if there are any other measurements that you will require.

expert reply by: Bud M

1

Hitch Height Dimensions Curt C11158
(click to enlarge)

Answer 1

Yes, the Curt Hitch part #C11158 that you referenced has been confirmed as a fit for your 2015 Ford Focus so I would recommend it for you. I attached an install video for this hitch for you to check out as well.

view full answer...

Answer 2

Curt recommends the stabilizer strap with non-supported loads like bike racks to help support the hitch when going over bumps to prevent some of the vertical shock from being transferred to the hitch. Curt does this as a precaution, it's not that…

view full answer...

Answer 3

The Thule T2 Pro 2 Bike Platform Rack referenced in your question is a great platform rack designed for Class I and Class II trailer hitch receivers. Since the release of the T2 Pro 2 Bike Platform Rack, Thule has made some improvements and released…

view full answer...

Answer 4

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 5

The Curt Trailer Hitch Receiver #C11158 is going to sit right up against the bottom of the bumper fascia on your 2018 Ford Focus hatchback so it's not going to affect ground clearance too much. This Class I hitch features a tongue weight capacity…

view full answer...

Answer 6

The Draw-Tite Sportframe Trailer Hitch Receiver #24979 is currently the only receiver we have which fits your 2022 Volkswagen Golf GTI S trim. This is custom fit receiver which only requires a small 2"x3" section of the rear fascia to be…

view full answer...

Answer 7

The trailer hitch I recommend for your 2018 Ford Focus ST hatchback is the Curt Class I part #C11431 which is a confirmed fit and would work well. Currently it's the only option we have for your vehicle but it's a great USA made trailer hitch…

view full answer...

Answer 8

The trailer tire size you referenced, 18.5 x 8.5-8, has a modern metric equivalent, which is size 215/60-8. This tire size fits rims that are 7-inches wide and when mounted and inflated the tire's overall diameter will be just over 18-inches. The…

view full answer...

Answer 9

For your aluminum trailer with a galvanized steel tongue (swing-away tongues cannot be used on aluminum tongues), you'll need a die-cast steel tongue with a zinc finish from Fulton. The correct fit is going to depend on the size of your trailer…

view full answer...