Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System Review Video

Really you're going to need to measure the distance where the leveling system is going to be installed. If that distance is more than 20', then you're going to want the 6 point Lippert Ground Control 3.0 Electric 5th Wheel RV…

I don't know what type of brackets were used on your 2022 Heartland RV Torque 5th Wheel but we carry the #LC349975, which can really only be installed at one height since they have lip that butts up against the bottom of the I-Beam. If…

I sent your picture to my tech contact at Lippert and they responded with saying that the mounting brackets are designed to go behind and under the cross shaft of the slide out. If you check out the picture I attached you'll see how it would…

Yes you can use the Lippert Solid Stance RV Step Support Kit #LC96BJ. This support kit will work with steps 5" to 14" off the ground, and measures 22-3/4" wide x 2-5/8" tall x 4-1/2" deep when folded.…

The total weight of the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System #LC675817 that you referenced is 350 lbs.

Yes you can absolutely use grade 8 bolts instead of the Replacement 3/8" x 3" Snapper Pin for Lippert Ground Control 3.0 Electric Leveling System #LC225598. You'll just want to make sure the bolts you use are the same…

Because the gross weight rating on the 2018 Dutchmen Endurance 3556 is greater than 15,500 pounds you will need to use the 6-point Ground Control system #LC675817. The 4-point system is not recommended for this application.

When installing the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System #LC675817 between the controller and the battery cable there is a 50 amp breaker required. We have that with the part #PK54250PL.

The JT's Strong Arm Stabilizer Kit #LC191023 paired with the either #LC314597 to adapt it to electric jacks, or #LC314592 to adapt it to hydraulic jacks, can be used with auto leveling jacks without issue. I spoke to MORryde and the #MR72AR…

We do have a replacement wireless remote for the Lippert Ground Control 3.0 #LC358590, for that you would want the part #LC358601. Here is how the remote would get programmed: 1. Enter the Leveler app on the LINC Remote. 2. Turn the remote on by…

I have attached for you the installation manual of the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System part #LC675817. This is a generic install manual that can be used on any trailer but there is not a set of instructions specific…

If you didn't have to install the pigtail that came with the Lippert Components Kwikee 25 Series Triple Electric Step #LC3658373 then you would want to test the wire functions of the current pigtail (with the 4 prong connector) that is…