Is Powder Coated E-Track More Rust Resistant than Galvanized

Question

Question:

Which is more durable with the least rust problems, galvanized or powder coated?

asked by: Scott

1

Helpful Expert Reply:

Powder coating and galvanization are both about the same in terms of rust resistance. If you like the black of the part # e42VR it would work just as well as a galvanized version # e62VR.

expert reply by: Jameson C

1

Answer 1

Since the slot dimensions and capacity of different brands of E-Track are identical, really the only differences are the finish and the lengths the tracks are sold in. If you're using the E-Track in an area where aesthetics are important, you can…

view full answer...

Answer 2

You will use metal screws to install the etrailer Horizontal E-Track #e42VR. You'll also need backing plates to install this e-track and the mounting hardware is actually included with the etrailer E-Track Backing Plates with Hardware #e76YR. The…

view full answer...

Answer 3

The etrailer e-track system #e42VR will work great in your aluminum utility trailer, but you will want to put a layer between the E-Track and the aluminum of your trailer. This layer will help prevent corrosion cause by contact of dissimilar metals.…

view full answer...

Answer 4

The etrailer E-Track Backing Plates with Hardware part #e76YR work with any of the etrailer Horizontal E-Tracks like part #e42VR. The track and backing plates allow for up to 2,000 lbs but you'll also be limited by the material you're…

view full answer...

Answer 5

E-tracks are typically the stronger of the two, but X-track is more versatile since you can mount them horizontally or vertically. Choosing between the two really depends upon how you plan to use them. If you are installing something in a truck bed,…

view full answer...

Answer 6

Yes, the B and W Continuum part #BW78FR will prevent the porpoising you are experiencing. It allows you to fine tune the spring bar tension a lot more than the Andersen setup you have now so it will provide a much better towing experience. The…

view full answer...

Answer 7

To select the correct B&W Continuum Weight Distribution System for your needs you will first need to determine if you have a standard coupler(mounts on top of trailer frame rails) or an underslung coupler(mounts on the bottom of the trailer frame…

view full answer...

Answer 8

There really isn't a profile difference between the tapered style of Tow Rax L-Track like the part #TWSP12TAB and the low profile #TWSP72TA. The low profile does sit a little taller at 1/2 inch tall whereas the tapered is 7/16 inch. That's a…

view full answer...

Answer 9

Yes. The etrailer Horizontal E-Track - Galvanized Steel - 2,000 lbs - 8' Long #e62VR can be driven on without any issue and have a maximum capacity of up to 6000-lbs each(break strength), so they'll be able to handle your ATV/UTV without…

view full answer...

Answer 10

Since you have an aluminum trailer I suggest using a tie-down that has a backing plate like #RR5K. This will help reinforce the tie-down since aluminum may not hold up. It would be even better if you can install the tie-downs to the frame of the…

view full answer...

Answer 11

Yes, you can use the B and W Continuum #BW78FR an Air Lift air bag kit #AL88375 on your 2020 Ram 1500. You would want to first decide how much air pressure in the bags you want and then setup up the Continuum and you'd be set.

view full answer...

Answer 12

The Tow-Rax system is compatible with the Erickson O-Track System and vice versa. The weight capacities/restrictions are based on the attachments themselves, so those individual capacities are what you will want to pay attention to when interchanging…

view full answer...

Is Powder Coated E-Track More Rust Resistant than Galvanized

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching