Trailer Wiring Harness Installation - 2011 Toyota Corolla Video

It sounds like something is causing a short circuit in the wiring of the Curt harness you mentioned in your question. I recommend checking all of the connections the harness is making to your vehicle to see if there is anything out of place that…

Based on the steps you have already taken it sounds like the converter box is bad which means it will need to be replaced, not opened and serviced. The only thing I'm not sure about is what wiring you specifically have. From what I could…

Since you mention that the LED light on the Reese Trailer Connector Adapter, #78118, isn't illuminating for the tail lights, it sounds like the issue is with the truck but this could be something as simple as dirt or corrosion in the 2013…

You can test the wiring harness, #118438, to determine if it is functioning properly. First, use a circuit tester, like #PTW2993 if needed, to test the wires going into the converter from the vehicle. If there is no signal for the running light…

Typically when a fuse keeps blowing that means there is a short somewhere on your wiring circuits. You can isolate the issues to your tow vehicle or trailer by simply disconnecting the trailer before replacing your fuses. Once you know which end…

To determine the rise/drop you need, you'll need to determine the height difference between your receiver and the trailer coupler. I've linked you to an FAQ article that shows how to do this. I've linked you to the Euro Style…

The Curt #C45561 Euro-Style ball mount you referenced is exactly what you'll need. The ball mount will work fine with your #C11265 Class I hitch once it's installed. Keep in mind that the ball mount carries a 3500 lb towing/350 lbs…

I would discourage the use of an adapter for use of 2 inch accessories in 1-1/4 inch trailer hitch receivers. The reason is that the adapter places the carrier farther away from the rear of the vehicle and hitch, creating additional torque that…

There isn't a specific distance you want to have between the bumper of a vehicle and the hitch ball, but in general you'll want more than an inch. This will give you additional leeway when hitching up the trailer so that you…

You will need to use a quick splice, item #SWC502905-1, and splice the black wire from the LED Trailer License-Plate Light, item #LPL55CB, into the taillight wire on your trailer. The taillight wire is normally the brown wire, but you should use a…

The Curt 2" Trailer Hitch Receiver #C13315 is an excellent option for your 2019 Mazda CX-5 and really the only other option available that I would recommend above it is the etrailer.com 2" Trailer Hitch #e98902, and that is only due…

I do not have a bike cover, but I do have a tarp and straps that would serve the same purpose. You could combine the Erickson All-Purpose Blue Tarp, 7 x 7 Weave - 6' x 8', part #EM57000, and the Erickson Tarp Tie-Down Strap w/ S-Hooks…