Demco eZ-Latch Channel Tongue Trailer Coupler Latch Repair Kit Review Video

I do have an option for you but latch repair kits are coupler specific and there are very few out there. Furthermore, the Lippert 2" Latch Coupler Repair Kit 678750 is no longer available and I know this isn't what you want to hear but the…

Yes, the repair kit part #DM5817 that you referenced does fit the cast Demco EZ Latch couplers like the #DM15791-81 so this kit would work well for your. This is only way to get the replacement handle and pin as well as they are not available…

I do have an option for you but Atwood is no longer in business so the only option would be a full replacement for which I recommend the Demco 50-Degree A-Frame Trailer Coupler part #DM16680-52. It features a bolt-on install, easy couple design, and…

Based on the 3,518 pound GVWR I found for your 2013 Coachmen Clipper, the coupler is likely compatible with a 2 inch hitch ball like the Tow Ready #63845. This 2 inch diameter ball features a 1 inch diameter shank. With that being said, I highly…

Since you didn't specify which bearing of your hub is 25580 I am fairly certain that the correct Bearing Buddy you would need would be the part #BB2717. But you will need to measure the bore where you old grease cap sits currently to verify that…

Thank you very much for your follow up question. The Bearing Buddy Bearing Protectors #BB2717 are designed to work with outer bearing model 14125A and outer bearing cup (race) model 14276, which are commonly found on 7,000-lb Dexter axles. Most…

I checked the Featherlite Trailer website for specs on the model 3116 trailer but this part number returned no results. But if your trailer uses an industry-standard 50-degree a-frame design then the Demco A-Frame Trailer Coupler #DM16680-52 will fit…

There is not a repair kit for the thumb latch of the A-Frame Trailer Coupler - Underslung - Thumb Latch - Black - 2-5/16" Ball #CA-5335-B. While I wish we had an option for you, if yours has busted you will need to replace the entire coupler.

The Repair Kit Fulton Wedge-Latch Cast Head Coupler, #F670801, is designed to fit the coupler #BD44125W0317 which does take a 2-5/16 inch ball.

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

On your 2012 Rockwood pop up trailer you will not have a replacement key option. The Replacement Cam Lock Cylinder for RVs - Keyed Alike Option - Stainless Steel - 1-3/4" Long #295-000077 you asked from is an option. You will simply want to…

The GlobalLink #295-000077 replacement cam lock cylinder is the longest replacement lock cylinder we offer. The #295-000077 measures 1-3/4 inches long, measured from the back of the bezel to the end of the cylinder. The cylinder is 3/4 of an inch in…