Curt Chrome Hitch Ball Review Video

Yes, the Tekonsha T-One 4-Pole Wiring Harness #118718 will work fine to power LED lights on a trailer or accessory carrier used with your 2019 Mazda CX-3 but it does require the 12V power wire connection in order to function. The plug-in connectors…

In order to select the correct amount of rise or drop you would need you will need to take a couple measurements. The goal is to have your trailer sit as level as possible. The first thing you will need to do is park your tow vehicle on level ground…

With Curt hitch #C11418 installed on a 2016 Mazda CX-3 the lower fascia is still attached elsewhere on the vehicle and it will also be resting on top of the hitch receiver. There isn't room to replace the brackets that were removed to install the…

Yes, a trailer that is nose up can cause big problems. A level trailer is ideal and worth working toward for safety. The good news is that you can get the trailer almost exactly level with switching ball mounts. This is where an adjustable ball mount…

Officially we have to recommend that you always stay with the recommendation of the manufacturer on towing as they are who the warranty of the vehicle is with and they are who would have tested the vehicle for towing. That being said we realize that…

Although both the Draw-Tite #24933 and the Curt #C11418 Class I hitches look pretty different, in all the ways that matter they're very similar. Both hitches are a concealed mount, so the crossbars are hidden behind the vehicle bumper with the…

With Class I hitches like the Draw Tite part #24933 that you referenced you have to use the ball mount that the hitch manufacturer requires which in this case is the Draw Tite part #3593. Then for hitch balls you'd want the part #19258 for a 2…

For a bike rack the Draw Tite part #24933 is the better choice as Curt requires a stabilizer strap like part #18050 with their Class I hitches when carrying a non-supported load like a bike rack. You'll be much happier with the Draw Tite over the…

The Curt Drawbar for 1-1/4" Hitches part #C45028 (5-3/8" Rise) is the most amount of rise we offer for a standard ball mount that fits a 1-1/4" trailer hitch receiver. The 2" Hitch Ball can then be added with part #C40018. The…

The biggest rise we offer in a 1-1/4 inch ball mount is 5-3/8 inches, and that is part #C45028. This ball mount is a Class l and also features a 5-9/16 inch drop. This ball mount is rated for a gross towing capacity of 2,000-lbs. The hitch pin and…

The maximum towing capacity of your 2017 Honda Accord is 1,000 lbs. The towing capacity of the hitch will not change the vehicle's towing capacity as the lower of the two ratings (vehicle/hitch) will always be the limiting factor. For your…

Between the two hitches that fit your 2018 Mazda CX-3 the Curt, part #C11418, is tucked under the rear bumper by about an inch more than the Draw-Tite, part #24933. Although I feel like the Curt is still more obvious to the eye because it has the…